Efficiency data

According to an elegant remark by Davies [5], "Modem scientific data handling is multitechnique, multisystem, and manufacturer-independent, with results being processed remotely from the measuring apparatus. Indeed, data exchange and storage are steps of the utmost importance in the data acquisition pathway. The simplest way to store data is to define some special format (i.e., collection of rules) of a flat file. Naturally, one cannot overestimate the importance of databases, which are the subject of Chapter 5 in this book. Below we discuss three simple, yet efficient, data formats. 

EmpiricalEfficieny Prediction Methods. Numerous empirical methods for predicting plate efficiency have been proposed. Probably the most widely used method correlates overall column efficiency as a function of feed viscosity and relative volatiHty (64). A statistical correlation of efficiency and system variables has been developed from numerous plate efficiency data (65). 

Ripple plate—2.85-mm in) holes, 10.8 percent open area Efficiency data from the work are summarized in Fig. 14-40. 

Work at the University of Manchester Institue of Science and Technology (UMIST) has resulted in several papers reporting efficiency data taken in a 0.6-m-diameter column. The systems methanol/water, isopropanoil/water, and toluene methylcyclohexane have been used. The results may be found in Lockett and Ahmed [Chem. Eng. Re.s. Des., 61, 110 (1983)], Korchinsky et al. [Trans. Chem. E., 72, 406 (1994)], and Korchinsky [ibid., 472]... 

Additional plate-efficiency data are hsted in Table 14-6. 

Efficiency data for a representative structured packing at two column diameters are shown in Fig. 14-74. The Max-Pak packing has a surface area of 246 m /m (7.5 ft /fE). The same test mixture (cyclo-hexane//i-heptane) and operating pressure was used for both tests. It would appear that column diameter does not have an influence in this range of values (0.43 to 1.2 m). 

Cake Washing Wash efficiency data are most conveniently represented by a semilog plot of percent remaining B as a function of wash ratio N as shown in Fig. 18-103. Percent remaining refers to that portion of the solute in the dewatered but unwashed cake which is left in the washed and dewatered cake. Since a cake-washing operation... 

Ejftciency Factors Representative efficiency data for boilers, pyrolytic reacdors, gas turbines, steam-turbine-generator combinations, electric generators, and related plant use and loss factors are... 

The facility wastewater monitoring program does not determine the concentration of lead and lead compounds in the scrubber discharge water, and releases to the surface impoundment (releases to land) must be calculated using mate-riai balance information. These releases to land are determined from the amount of lead removed by the scrubber (using the efficiency data provided by the scrubber manufacturer). The volume of the scrubber blowdown Is found to be 1,500 pounds per year. Enter the estimate of the amount of lead and lead compounds released to surface Impoundments in the space provided in Part III, Section 5.5.3 of the form. Because releases of lead to the surface Impoundment are greater than 999 pounds per year, you must enter the actual calculated amount in column A.2 of Section 5.5.1. The basis for the estimate of releases to the surface impoundment, entered in column B of Section 5, is mass balance calculations (code C). 

Efficiency data are seasonal energy efficiency ratings (SEER) for cooling and heating seasonal performance factors (HSPF) for heating. 

Et2 All coinitiators and MeCl, MeBr and Mel solvents at various temperatures. The H20 /EtAiei2/n-pentane system was also briefly investigated. A large number of comparative molecular weight and conversion data were gathered. The effect of MeX on the polymerization was investigated in detail. In this section, conversion and initiator efficiency data will be discussed. 

Research into so-called ontologies is also currently very active. Ontologies can be used to characterize the principal concepts in a particular discipline and how they relate one to another. Many people believe they are necessary if database annotation is to be made accessible to both people and software, but also in facilitating more effective and efficient data retrieval. The well-known Gene Ontology consortium, or GO, defines the term ontology as ... specifications of a relational vocabulary . In other words they are sets of defined terms like the sort that you would find in a dictionary, but the terms are networked. The terms in a given vocabulary are likely to be restricted to... 

There has been a push for direct data collection (DDC) as an alternative to remote data capture (RDC). In this approach most of the required clinical data are acquired directly from existing patient record systems such as MRI machines, ECG, EEG, TTM, laboratories, and other measurement equipment. This approach eliminates the need for paper transcription and reentry to another system. It promises error-free and resource-efficient data capture, which allows early locking of the database and therefore potentially earlier product launch [30]. 

An alternative for evaluating accuracy is spiking known amounts of standards to a food, as reported in several papers,although percent recoveries of spikes do not truly address the influence of the food matrix complexity on the extraction efficiency. Data evaluation procedures were developed as a manual system to assess the quality of analytical data for carotenoids in foods. ... 

The form or format of the notebook is not as critical from a GLP compliance standpoint as the completion of the record in an accurate, timely, readable, and attributable manner. Company and PI conventions typically have evolved into cost-effective and very efficient data notebooks for field residue trials. These notebooks contain the actual raw data for the trial and once begun become extremely valuable legal parts of the study record. The notebooks should be audited by QA during the field phase of the study as well as at the end of the trial before the notebook is returned to the sponsor organization. The quality of the trial is easily refiected in the quality of the field notebook at the end of the season. 

Spirodela intermedia, L. minor, and P. stratiotes were able to remove Pb(II), Cd(II), Ni(II), Cu(II), and Zn(II), although the two former ions were removed more efficiently. Data fitted the Langmuir model only for Ni and Cd, but the Freundlich isotherm for all metals tested. The adsorption capacity values (K ) showed that Pb was the metal more efficiently removed from water solution (166.49 and 447.95 mg/g for S. intermedia and L. minor, respectively). The adsorption process for the three species studied followed first-order kinetics. The mechanism involved in biosorption resulted in an ion-exchange process between monovalent metals as counterions present in the macrophytes biomass and heavy metal ions and protons taken up from water.112... 

The algorithms have to handle large numbers of quants. This requires very efficient data structures and algorithms. 

A coal combustion pilot plant is used to obtain efficiency data on the collection of particulate matter by an electrostatics precipitator (ESP). The ESP performance is varied by changing the surface area of the collecting plates. Figure E2.2 shows the data collected to estimate the coefficients in a model to represent efficiency 17 as a function of the specific collection area A, measured as plate area/volumetric flow rate. 

Liebman, M. J. T. F. Edgar and L. S. Lasdon. Efficient Data Reconciliation and Estimation for Dynamic Processes Using Nonlinear Programming Techniques. Comput Chem Eng 16(10/11) 963-986 (1992). 

Jang, S. S., Josepth, B and Mukai, H. (1986). Comparison of two approaches to on-line parameter and state estimation problem of non-linear systems. Ind. Eng. Chem. Process Des. Dev. 25, 809-814. Jazwinski, A. H. (1970). Stochastic Processes and Filtering Theory. Academic Press, New York. Liebman, M. J., Edgar, T. F., and Lasdon, L. S. (1992). Efficient data reconciliation and estimation for dynamic process using non-linear programming techniques. Comput. Chem. Eng. 16, 963-986. McBrayer, K. F., and Edgar, T. F. (1995). Bias detection and estimation on dynamic data reconciliation. J Proc. Control 15, 285-289. 

Liebman, M. J., Edgar, T. F., and Lasdon, L. S. (1992). Efficient data reconciliation and estimation for dynamic process using non-linear programming techniques. Comput. Chem. Eng. 16,963-986. 

The correlation of efficiency data is based on the total contacting power PT, which is the sum of PG, PE, and any power PM that may be supplied mechanically by a power-driven rotor. 

Grade efficiency data are usually derived from experimental trials which provide sufficient information to allow the material balance to be closed for particles of all sizes. Sufficient information for determination of G(d) is provided by a combination of any three of the following four system properties E, Ff(d), Fu(d), F0(d), the remaining property being determined by the material balance. Size distribution data for primary particles, rather than floes or aggregates, are required for the inventory. 

Research the efficiency and environmental impact of your energy source. If possible, determine what the efficiency data means. 

Model C units do not have natural gas or electrical efficiency data. 

We have implemented the principle of multiple selective excitation (pulse sequence II in fig. 1) thereby replacing the low-power CW irradiation in the preparation period of the basic ID experiment by a series of selective 180° pulses. The whole series of selective pulses at frequencies /i, /2, , / is applied for several times in the NOE build-up period to achieve sequential saturation of the selected protons. Compared with the basic heteronuclear ID experiment, in this new variant the sensitivity is improved by the combined application of sequential, selective pulses and the more efficient data accumulation scheme. Quantitation of NOEs is no longer straightforward since neither pure steady-state nor pure transient effects are measured and since cross-relaxation in a multi-spin system after perturbation of a single proton (as in the basic experiment) or of several protons (as in the proposed variant) differs. These attributes make this modified experiment most suitable for the qualitative recognition of heteronuclear dipole-dipole interactions rather than for a quantitative evaluation of the corresponding effects. 

Nipoti, R., et al., A Study of He Ion-Induced Damage in Silicon by Quantitative Analysis of Charge Collection Efficiency Data, Nucl. Instr. and Meth. in Phys. Res. B, Vol. 136-138, 1998, pp. 1340-1344. 

The same oil fractions were used for each species therefore, any given property of an oil may be used with either set of efficiency data 19). 

---