Distillate characterization

Fractional distillation characterizes the initial boiling point, volume % of materials boiling at specified temperature ranges, end point, residue, and loss. A procedure termed 15 5 distillation is frequently used to assist in crude oil characterization. This procedure utilizes a column possessing the equivalent of 15 theoretical plates and a reflux ratio of 5 1. 

Boiling point - helpful in ascertaining temperatures required for vaporization in process operations, determine separation by distillation, characterize general volatility characteristics... 

P. Claudy, J.M. Letoff6 et al.. Crude oils and their distillates characterization by differential scanning calorimetry. Fuel 67, 58-61 (1988)... 

The current contribution describes a hydrotreatment catalysts preparation method for different petroleum distillates - gasoline and vacuum gas oil (VGO). Since S- and N- containing compounds of these distillates characterized with a different molecule size, the nanoparticles of active phase have to be arranged in the pores with relatively small sizes for gasohne and with a large size for vacuum gas oil. The key factor in obtaining such catalysts is the size of the bimetallic complexes used for the catalysts preparation. Whereas the molecule size of the complex that will be supported determines in what pores the active sites will be arranged. 

One distinguishes preparatory distillations that are designed to separate the fractions for subsequent analysis from non-preparatory analytical distillations that are performed to characterize the feed itself. For example, the distillation curve that gives the recovered volume or weight as a function of the distillation temperature characterizes the volatility of the sample. 

Along the same lines, a distillation can be simulated by gas phase chromatography. As in a refinery, distillation in the laboratory is very often the first step to be carried out, because it gives the yields in different cuts gasoline, kerosene, etc., and makes further characterization of the cuts possible. 

To extend the applicability of the characterization factor to the complex mixtures of hydrocarbons found in petroleum fractions, it was necessary to introduce the concept of a mean average boiling point temperature to a petroleum cut. This is calculated from the distillation curves, either ASTM or TBP. The volume average boiling point (VABP) is derived from the cut point temperatures for 10, 20, 50, 80 or 90% for the sample in question. In the above formula, VABP replaces the boiling point for the pure component. 

In this manner, the KuQp of a petroieum cut can be calcuiated quickly from readily avkilable data, i. e., the specific gravity and the distillation curve. The A //np value is between 10 and 13 and defines the chemical nature of the cut as it will for the pure components. The characterization factor is extremely Va luable and widely used in refining although the discriminatory character of the Kuqp is less than that obtained by more modern physical methods described in 3.2 and 3.3. 

It is common that a mixture of hydrocarbons whose boiling points are far enough apart petroleum cut) is characterized by a distillation curve and an average standard specific gravity. It is then necessary to calculate the standard specific gravity of each fraction composing the cut by using the relation below [4.8] ... 

Crude oil is generally characterized by a TBP analysis whose results are expressed as temperatures equivalent to atmospheric pressure as a function of the fraction of volume and weight distilled... 

Each petroleum cut obtained by mixing the TBP distilled fractions (and thus characterized by the TBP cut points) is described by a coiiection of properties including the viscosity at two temperatures. 

Outside of their very high resistance to auto-ignition, the aviation gasolines are characterized by the following specifications vapor pressure between 385 and 490 mbar at 37.8°C, a distillation range (end point less than 170°C), freezing point (-60°C) and sulfur content of less than 500 ppm. 

Volatility is generally characterized by a distillation curve (the quantity distilled as a function of temperature). Often, only the initial and final boiling points are taken into account along with, possibly, a few intermediary points. 

The hydrocracking process is characterized by a very low gas production and a low LPG yield especially when operated for maximum distillates. Byproducts in this operating mode are ... 

FIGURE 2 11 Distillation of crude oil yields a series of volatile fractions having the names indicated along wih a nonvolatile residue The number of carbon atoms that characterize the hydrocarbons in each frac tion IS approximate... 

Flavor Formulas. Tables 7 and 8 give examples of modem flavor formulas. In Table 7 formula A is composed of fmit juice concentrate and essence distilled or extracted from the fmit juice. It is all natural and all from the named fmit, and is therefore termed a "natural flavor." It has a characterizing natural flavor. In Formula B the flavor is all natural, but is not all from the named fmit, ie, the fortifier is all natural but is not totally derived from the named fmit. Since the fortifier simulates, resembles, or reinforces the named flavor, eg, apple or pineapple, the flavor must be called "flavor with other natural flavors." It has a natural flavor with characterizing naturals added. Formula C is composed of both natural and artificial components with the natural usage outweighing the artificial. Therefore, it is a "flavor natural and artificial." It has a characterizing natural and artificial flavor. 

Sandalwood Oil, East Indian. The use of sandalwood oil for its perfumery value is ancient, probably extending back some 4000 years. Oil from the powdered wood and roots of the tree Santalum album L. is produced primarily in India, under government control. Good quaUty oil is a pale yellow to yellow viscous Hquid characterized by an extremely soft, sweet—woody, almost ariimal—balsarnic odor. The extreme tenacity of the aroma makes it an ideal blender—fixative for woody-Oriental—floral fragrance bases. It also finds extensive use for the codistillation of other essential oils, such as rose, especially in India. There the so-called attars are made with sandalwood oil distilled over the flowers or by distillation of these flowers into sandalwood oil. The principal constituents of sandalwood oil are shown in Table 11 (37) and Figure 2. 

Incompletely Characterized Carbon Sulfides. A poorly characterized black soHd, known as carsul, occurs as a residue ia sulfur distillation or as a precipitate ia molten Frasch sulfur (12,13). Although this material may approach the composition of a carbon sulfide, it is more likely also to contain some chemically bound hydrogen and possibly other elements. Carbon—sulfur surface compounds of the formula C S, where xis greater than 4,... 

Distillation appHcations can be characterized by the type of materials separated, such as petroleum appHcations, gas separations, electrolyte separations, etc. These appHcations have specific characteristics in terms of the way or the correlations by which the physical properties are deterrnined or estimated the special configurations of the process equipment such as having side strippers, multiple product withdrawals, and internal pump arounds the presence of reactions or two Hquid phases etc. Various distillation programs can model these special characteristics of the appHcations to varying degrees and with more or less accuracy and efficiency. 

When simple Hquids like naphtha are cracked, it may be possible to determine the feed components by gas chromatography combined with mass spectrometry (gc/ms) (30). However, when gas oil is cracked, complete analysis of the feed may not be possible. Therefore, some simple definitions are used to characterize the feed. When available, paraffins, olefins, naphthenes, and aromatics (PONA) content serves as a key property. When PONA is not available, the Bureau of Mines Correlation Index (BMCI) is used. Other properties like specific gravity, ASTM distillation, viscosity, refractive index. Conradson Carbon, and Bromine Number are also used to characterize the feed. In recent years even nuclear magnetic resonance spectroscopy has been... 

Rerunning operations are characterized by large volumes of distillate products and relatively small residue yields. Frequently, the product is withdrawn as a sidestream with undesirable light fractions passing overhead and polymers being withdrawn from the bottom of the tower. Lube rerun stills usually have several sidestreams which permit close control of flash point and viscosity while producing a wide range of stocks. 

---