2,2’- -diethanol

These materials were reviewed as a special class of block copolymersThey are linear polyaddition products of diisocyanates containing nonrandom distributions of ionic centers. The preparations are similar to those of polyurethane elastomers that are described in Chapter 6. One example is a material prepared from a high molecular weight polyester that is free from ionic centers and that is terminated by isocyanate groups at each end. The prepolymer is coupled with AT-methyl-amino-2,2 -diethanol to form a segmented polymer ... 

Oil Repellent. Fluorochemicals are the only class of material that can provide oil repeUency without altering the porosity of the paper or paperboard. Physical barriers to oil penetration are used primarily for their moisture- or gas-barrier properties, with retarded oil penetration as a secondary benefit. The most common od-repeUent additives are long-chain perfluoroalkyl phosphate salts of ammonia or diethanol amine. Commercial sources include Scotchban (3M), Zonyl (DuPont), and Lodyne (Ciba Specialties). There are also a fluorochemical carboxylate salt, Lodyne (Ciba Specialties), and fluorochemical copolymers, eg, Scotchban (3M). The widest range of oily fluid holdout is provided by the fluorochemical copolymers. 

The procedure described is essentially that of Belleau and Weinberg and represents the only known way of obtaining the title compound. One other quinone acetal, 1,4,9,12-t6traoxadispiro[4.2.4.2]tetradeea-6,13-diene, has been synthesized by a conventional method (reaction of 1,4-cyclohexanedione with ethylene glycol followed by bromination and dehydrobromination ) as well as by an electrochemical method (anodic oxidation of 2,2-(l,4-phenylenedioxy)diethanol ). Quinone acetals have been used as intermediates in the synthesis of 4,4-dimethoxy-2,5-cyclohexadienone,. syw-bishomoquinone, - and compounds related to natural products. ... 

MEA = Monoethanol amine DEA = Diethanol amine MDEA = Methydiethanol amine... 

This compound is also described as diethanol-p-toluidine in the older literature. Anilines bearing hydroxyl groups are preferred because they are less volatile than anilines without polar substituents. Tertiary aromatic amines with para-halogen substitution have also been reported for use in adhesives [42]. 

The overall reaction of hydrogen sulfide with diethanol amine (Lai et al, 1985) is given by... 

Chemical solvents Monoethanol amine (MEA) Diethanol amine (DEA) Methyldiethanol amine fMDEA) Diglycol amine (DGA) Diisopropanol amine (DIPA)... 

Of the following amine systems that are discussed, diethanol amine (DEA) is the most common. Even though a DEA system may not be as efficient as some of the other chemical solvents, it may be less expensive to install because standard packaged systems are readily available. In addition, it may be less expensive to operate and maintain because field personnel are likely to be more familiar with it. 

It was discovered that 3-iiitro-2-piperidiiio-, 3-iiitro-7-piperidiiio-, and 7-A -diethaiiolamiiio-3-iiitro-l, 8-iiaphthyridiii-2(lH)-oiies and 2-diethanol-amino-7-piperidino-3-nitro-l,8-naphthyridine showed remarkable aetivity to inhibit human platelet aggregation in vitro indueed by araehidonie aeid, eollagen, and ADR Tliis aetivity was eomparable to papaverine, dipyridamole, and ibuprofen (94EJMC735). 

Piridicillin (27) is made by ]T-acylating amoxycillin with a rather complex acid. The synthesis begins by reacting j, ]i-diethanol amine with. c ty i zene-sul fonyl chloride to give 23. Conversion (to 24) with ethyl formate and sodium... 

Chemical Name 2,2 -[(4,5-diphenvl-2-oxa2olyl)imino]diethanol Common Name Diethamphena2ol... 

Diethanol methylamine Sodium amide Sulfuric acid Hydrogen chloride Thionyl chloride Benzyl cyanide Ethanol ... 

Therapeutic Function Cholesterol-reducing agent Chemical Name 2,2 -(decamethylenedithio)diethanol Common Name -... 

In the crystal of 1,4-dicinnamoylbenzene (1,4-DCB) (see Fig. 12), the distances between the intermolecular photoadductive carbons are 3.973 and 4.086 A for one cyclobutane ring, and 3.903 and 3.955 A for the other. The two topochemical pathways may occur competitively in a single crystal of 1,4-DCB at the initial stage of reaction. Then, both intramolecular photodimerization and intermolecular photopolymerization of the diolefinic mono-cyclobutane intermediate occur competitively to give tricyclic dimer 21,22,23,24-tetraphenyl-l,4,ll,14-tetraoxo-2(13),12(13-diethanol, [4.4] para-cyclophane or oligomers (Hasegawa et al., (1985). On photoirridation at room temperature the 1,4-DCB crystal gives >90% of the tricylic... 

Ethylene-acrylic acid copolymer neutralized with amines such as triethanol amine or N-methyl diethanol amine enhances anti-settling properties [1198, 1554]. 

A method suitable for quantification of the functional class of bis(ethanol)amine antistatics, which lack UV chromophores, consists of reaction with methyl orange [53]. Atmer 163 (alkyl-diethanol amine) has been determined as a yellow complex at 415 nm after interaction with a bromophenol/cresole mixture [64]. Hilton [65] coupled extracted phenolic antioxidants with diazotised p-nitroaniline in strongly acidic medium and carried out identification on the basis of the visible absorption spectrum in alkaline solution. The antioxidant Nonox Cl in... 

PLE pressurized liquid extraction, SPE solid phase extraction, UE ultrasonic extraction, DSPE dispersive solid phase extraction, SBSE stir bar sorptive extraction, TD-GC-MS thermal desorption-gas chromatography-mass spectrometry, LAS linear alkylbenzene sulfonates, CDEAs coconut diethanol amides, NPEOs nonylphenol ethoxylates, DP degradation products, SPC sulphenyl carboxylates, PCDD dibenzo-p-dioxins (PCDD), PCDF dibenzofurans, PCBs biphenyls... 

Gonzalez S, Petrovic M, Barcelo D (2004) Simultaneous extraction and fate of linear alkylbenzene sulfonates, coconut diethanol amides, nonylphenol ethoxylates and their degradation products in wastewater treatment plants, receiving coastal waters and sediments in the Catalonian area (NE Spain). J Chromatogr A 1052(1-2) 111-120... 

Diphenyl-2-hydroxyacetic Acid 2,2/-(Ethylenedithio)diethanol 2,2/-Ethyliminodiethanol 2,2/-Iminodiethanol 2,2/-Thiodiethanethiol... 

Diethanol Sulfide Diethanolamine Diethanolethylamine Diethanolmethylamine Diethoxyethylphosphine Oxide Diethoxymethylphosphine Oxide Diethoxyphosphine Oxide Diethyene Disulfide Diethyl Acid Phosphate Diethyl Ethanephosphonate Diethyl Ethylphosphonate Diethyl Hydrogen Phosphate Diethyl Hydrogen Phosphite Diethyl Hydrogen Phosphonate Diethyl Isopropylphosphonate Diethyl Methanephosphonate Diethyl Methylphosphonate Diethyl Phosphate Diethyl Phosphite Diethyl Phosphonate Diethyl Phosphoric Acid Diethyl(2-hydroxyethyl)amine Diethyl(/S-hydroxyethyl)amine Diethylaminoethanol Diethylethanolamine Diethylfosfit... 

Isopropyl thioxanthone/Ethyl diethanol amine 1 80 All Removed... 

Butyl glycol, b493 2,2 -(Butylimino)diethanol, b549 Butyl iodides, i26, i27, i38 Butyl levulinate, b582... 

Phenylimino)diethanol, pi 01 / -(2-Phenylisopropyl)phenol, m316a Phenyl mercaptan, tl 56 Phenylmethanol, b78... 

Therefore, a C13-AE, a cationic (quaternary ammonium) surfactant (quat), an amphoteric Ci2-alkylamido betaine, and the non-ionic fatty acid diethanol amide (FADA) as presented with their FIA-MS spectra in Fig. 2.5.12(a)-(d) were analysed as pure blends and as mixtures always obtained from two blends in FIA-MS multiple ion detection mode (MID). Mixtures as well as pure blends contained identical concentrations of surfactant homologues. For AE quantitation the mass traces of all A m/z 44 equally spaced homologues (m/z 306-966) of the C13-AE were recorded. The cationic (quaternary ammonium) surfactant, the amphoteric Ci2-alkylamido betaine, and the non-ionic FADA were quantified recording the mass traces at m/z 214 and 228, or 184, 212, 240, 268, 285, 296, 313, 324 and 341, or 232,260, 288, 316 and 344, respectively. 

Fatty acid and unsaturated fatty acid mono- and diethanolamides Fatty acid mono- (FAMA) and diethanol amides (FADA) with the general formula (C,32n+1-C(0)N(HyCH2-CH2-0H)2 x = l or 0) are presented with their general structural formulae in Fig. 2.9.28(a) and (b). These surfactants have found a widespread application in household and personal care formulations because of their quite good... 

The MS analysis using ESI was applied for the determination of an unknown surfactant compound contained in an extract of a shampoo formulation [44]. MS leading to sequential product ions helped to identify the constituents. The MS4 experiments together with other spectral observations confirmed the hypothesis that the unknown compound was a N-( 2-aminoethyl) fatty acid amide with the general formula R-C(0)-NH(CH2-CH2-N)R/R,/. An authentic sample of the proposed laury ampho mono acetate (LAMA) (R = -CH2-CH2-OH and R" = -CH2-CH2-COOH) that was available led to the same [M + H]+ parent ion at m/z 345. The fragmentation that could be observed under ESI-FIA-MS-MS(+) conditions resulted in an intensive examination of amide surfactants. However, only two of them—lauryl diethanol amide ([M + H]+ m/z 288), a non-ionic surfactant and laurylamido-(3-propyl betaine ([M + H]+ m/z 343)—... 

In this chapter, all four types of sediment and sludge sample handling techniques for non-ionic surfactants will be discussed and compared. Most of the studies published on non-ionics focus on APEOs and their degradation products, viz. the alkylphenols, but some extraction methods for alcohol ethoxylates (AEOs) and coconut diethanol amides will also be discussed. 

Non-ionic surfactants containing an amide group This group of non-ionic surfactants comprises different sub-groups, such as polyethoxylated amides, fatty acid diethanol amides, aminosu-gars and dialkyl disugar amides (gemini surfactants). 

Other non-ionic surfactants in the Mediterranean Sea Data on the marine occurrence of non-ionic surfactants other than APEO is very limited. Petrovic et al. reported alcohol ethoxylate (AE) concentrations along the coast of Spain of <0.1-15 p,g L-1 and coconut diethanol amide (CDA) concentrations of <0.05-24 p,g L-1, the highest concentrations present at sites receiving high amounts of industrial and domestic wastewater [9],... 

---