With hydrogen sulfide

The problem of the synthesis of highly substituted olefins from ketones according to this principle was solved by D.H.R. Barton. The ketones are first connected to azines by hydrazine and secondly treated with hydrogen sulfide to yield 1,3,4-thiadiazolidines. In this heterocycle the substituents of the prospective olefin are too far from each other to produce problems. Mild oxidation of the hydrazine nitrogens produces d -l,3,4-thiadiazolines. The decisive step of carbon-carbon bond formation is achieved in a thermal reaction a nitrogen molecule is cleaved off and the biradical formed recombines immediately since its two reactive centers are hold together by the sulfur atom. The thiirane (episulfide) can be finally desulfurized by phosphines or phosphites, and the desired olefin is formed. With very large substituents the 1,3,4-thiadiazolidines do not form with hydrazine. In such cases, however, direct thiadiazoline formation from thiones and diazo compounds is often possible, or a thermal reaction between alkylideneazinophosphoranes and thiones may be successful (D.H.R. Barton, 1972, 1974, 1975). 

Miscellaneous Reactions. Sodium bisulfite adds to acetaldehyde to form a white crystalline addition compound, insoluble in ethyl alcohol and ether. This bisulfite addition compound is frequendy used to isolate and purify acetaldehyde, which may be regenerated with dilute acid. Hydrocyanic acid adds to acetaldehyde in the presence of an alkaU catalyst to form cyanohydrin the cyanohydrin may also be prepared from sodium cyanide and the bisulfite addition compound. Acrylonittile [107-13-1] (qv) can be made from acetaldehyde and hydrocyanic acid by heating the cyanohydrin that is formed to 600—700°C (77). Alanine [302-72-7] can be prepared by the reaction of an ammonium salt and an alkaU metal cyanide with acetaldehyde this is a general method for the preparation of a-amino acids called the Strecker amino acids synthesis. Grignard reagents add readily to acetaldehyde, the final product being a secondary alcohol. Thioacetaldehyde [2765-04-0] is formed by reaction of acetaldehyde with hydrogen sulfide thioacetaldehyde polymerizes readily to the trimer. 

Hydroiodic acid, the colorless solution formed when hydrogen iodide gas dissolves in water, is prepared by reaction of iodine with hydrogen sulfide or hydrazine or by an electrolytic method. Typically commercial hydroiodic acid contains 40—55% HI. Hydroiodic acid is used in the preparation of iodides and many organic iodo compounds. 

At ordinary temperatures, mercury is stable and does not react with air, ammonia (qv), carbon dioxide (qv), nitrous oxide, or oxygen (qv). It combines readily with the halogens and sulfur, but is Htde affected by hydrochloric acid, and is attacked only by concentrated sulfuric acid. Both dilute and concentrated nitric acid dissolve mercury, forming mercurous salts when the mercury is in excess or no heat is used, and mercuric salts when excess acid is present or heat is used. Mercury reacts with hydrogen sulfide in the air and thus should always be covered. 

In the acid-leaching process, the oxide ore is leached with sulfuric acid at elevated temperature and pressure, which causes nickel, but not iron, to enter into solution. The leach solution is purified, foHowed by reaction with hydrogen sulfide and subsequent precipitation of nickel and cobalt sulfides. 

Ammonia combines with hydrogen sulfide, sulfur, or both, to form various ammonium sulfides and polysulfides. Generally these materials are somewhat unstable, tending to change in composition on standing. Ammonium sulfides are used by the textile industry. 

Preparation. Thiophosgene forms from the reaction of carbon tetrachloride with hydrogen sulfide, sulfur, or various sulfides at elevated temperatures. Of more preparative value is the reduction of trichi oromethanesulfenyl chloride [594-42-3] by various reducing agents, eg, tin and hydrochloric acid, staimous chloride, iron and acetic acid, phosphoms, copper, sulfur dioxide with iodine catalyst, or hydrogen sulfide over charcoal or sihca gel catalyst (42,43). 

The Claus process, which involves the reaction of sulfur dioxide with hydrogen sulfide to produce sulfur in a furnace, is important in the production of sulfur from sour natural gas or by-product sulfur-containing gases (see Sulfurremoval and recovery). 

Acid-Gatalyzed Synthesis. The acid-catalysed reaction of alkenes with hydrogen sulfide to prepare thiols can be accompHshed using a strong acid (sulfuric or phosphoric acid) catalyst. Thiols can also be prepared continuously over a variety of soHd acid catalysts, such as seoHtes, sulfonic acid-containing resin catalysts, or aluminas (22). The continuous process is utilised commercially to manufacture the more important thiols (23,24). The acid-catalysed reaction is commonly classed as a Markownikoff addition. Examples of two important industrial processes are 2-methyl-2-propanethiol and 2-propanethiol, given in equations 1 and 2, respectively. 

Thiophenecarboxaldehyde [498-62-4] has been commercially available (35) via carbonylation of 2,5-dimethoxy-2,5-dihydrofuran, followed by treatment with hydrogen sulfide, which introduces the sulfur atom with loss of methanol, inducing aromaticity and producing 3-thiophenecarboxaldehyde directly. 

Hydrochloric acid digestion takes place at elevated temperatures and produces a solution of the mixed chlorides of cesium, aluminum, and other alkah metals separated from the sUiceous residue by filtration. The impure cesium chloride can be purified as cesium chloride double salts such as cesium antimony chloride [14590-08-0] 4CsCl SbCl, cesium iodine chloride [15605 2-2], CS2CI2I, or cesium hexachlorocerate [19153 4-7] Cs2[CeClg] (26). Such salts are recrystaUized and the purified double salts decomposed to cesium chloride by hydrolysis, or precipitated with hydrogen sulfide. Alternatively, solvent extraction of cesium chloride direct from the hydrochloric acid leach Hquor can be used. 

With hydrogen sulfide at 500—600°C, monochlorotoluenes form the corresponding thiophenol derivatives (30). In the presence of palladium catalysts and carbon monoxide, monochlorotoluenes undergo carbonylation at 150—300°C and 0.1—20 MPa (1—200 atm) to give carboxyHc acids (31). Oxidative coupling of -chlorotoluene to form 4,4 -dimethylbiphenyl can be achieved in the presence of an organonickel catalyst, generated in situ, and zinc in dipolar aprotic solvents such as dimethyl acetamide (32,33). An example is shown in equation 4. 

When an acetylamino group is attached at an ortho position the replacement of chlorine is followed by cyclization. For example, 4-acetylamino-5-chloro-l-phenylpyridazin-6(lH)-one is converted with hydrogen sulfide in DMF to 2-methyl-6-phenylthiazolo[4,5- f]pyridazin-7(6//)-one (116). 

These effects can be attributed mainly to the inductive nature of the chlorine atoms, which reduces the electron density at position 4 and increases polarization of the 3,4-double bond. The dual reactivity of the chloropteridines has been further confirmed by the preparation of new adducts and substitution products. The addition reaction competes successfully, in a preparative sense, with the substitution reaction, if the latter is slowed down by a low temperature and a non-polar solvent. Compounds (12) and (13) react with dry ammonia in benzene at 5 °C to yield the 3,4-adducts (IS), which were shown by IR spectroscopy to contain little or none of the corresponding substitution product. The adducts decompose slowly in air and almost instantaneously in water or ethanol to give the original chloropteridine and ammonia. Certain other amines behave similarly, forming adducts which can be stored for a few days at -20 °C. Treatment of (12) and (13) in acetone with hydrogen sulfide or toluene-a-thiol gives adducts of the same type. 

The decomposition of (536) with hydrogen sulfide yields pyrazole (76T1909). The 1-phosphorylpyrazoles (537) are suitable reagents for the phosphorylation of alcohols, amines, hydrazines and azides (76AG(E)378). 

Alkylisothiazolium salts (61) undergo N—S bond cleavage when treated with hydrogen sulfide or thiophenol to form acyclic products (62), but 2-aryl compounds give 1,2-dithioles (63 or 64 Scheme 9) (75SST(3)54l, 77SST(4)339). 

Simple a-fluorosulfides are reduced to the fluoroalkanes by sodium-ethanol [9J (equation 75). Clean conversion of bis(trifluoromethyl) diiulfide to trifluoromethyl mercaptan is accomplished with hydrogen sulfide and ultraviolet irradiation (941 (equation 76). Perfluoroalkanesulfonyl fluondes are converted to the sulfmate salts by hydrazine [95] (equauon 77)... 

---