Aromaticity anthracene

In the cyclic 1 1 complex, glucose is held close to the anthracene aromatic face, as represented in Scheme B10.4.1. In fact, the 1 H-NMR spectrum exhibits a very large paramagnetic shift for the H3 proton (—0.3 ppm), which thus points towards the re-electrons of the anthracene moietya,b). 

Several acyclic receptors (Scheme 13), in which either one or two naphthalene or anthracene aromatic fragments have been appended to polyamine chains, have been constructed to take advantage of tt-tt stacking binding mode in water solutions. ... 

Complex Alkanes Aromatic e g.Naphthalene, Anthracene, Naphthenes J... 

Identification of Aromatic Hydrocarbons. Picric acid combines with many aromatic hydrocarbons, giving addition products of definite m.p. Thus with naphthalene it gives yellow naphthalene picrate, C oHg,(N08)jCeHiOH, m.p. 152°, and with anthracene it gives red anthracene picrate, C 4Hio,(NOj)jCeHjOH, m.p. 138 . For practical details, see p. 394. 

In the following preparation, this reaction is exemplified by the union of anthracene with maleic anhydride, to form 9,io-dihydroanthracene-9,io-e do-a -succinic anhydride note that as a result of this reaction both the outer rings of the anthracene system become truly aromatic in character. 

Benzene, toluene, anthracene, phenanthrene, biphenyl. Aromatic hydrocarbons with unsaturated side-chains. Styrene, stilbene. 

Picrates, Many aromatic hydrocarbons (and other classes of organic compounds) form molecular compounds with picric acid, for example, naphthalene picrate CioHg.CgH2(N02)30H. Some picrates, e.g., anthracene picrate, are so unstable as to be decomposed by many, particularly hydroxylic, solvents they therefore cannot be easily recrystaUised. Their preparation may be accomplished in such non-hydroxylic solvents as chloroform, benzene or ether. The picrates of hydrocarbons can be readily separated into their constituents by warming with dilute ammonia solution and filtering (if the hydrocarbon is a solid) through a moist filter paper. The filtrate contains the picric acid as the ammonium salt, and the hydrocarbon is left on the filter paper. 

Cations like that present in (iv) exist in solutions of aromatic hydrocarbons in trifluoroacetic acid containing boron trifluoride, and in liquid hydrogen fluoride containing boron trifluoride. Sulphuric acid is able to protonate anthracene at a mero-position to give a similar cation. ... 

Polycyclic aromatic hydrocarbons, of which anthracene is an example contain two or more benzene rings fused together... 

Acridine is a heterocyclic aromatic compound obtained from coal tar that is used in the syn thesis of dyes The molecular formula of acndine is C13H9N and its ring system is analogous to that of anthracene except that one CH group has been replaced by N The two most stable reso nance structures of acridine are equivalent to each other and both contain a pyndine like struc tural unit Wnte a structural formula for acridine... 

The biological properties of dioxin include an ability to bind to a protein known as the AH (aromatic hydrocarbon) receptor Dioxin IS not a hydrocarbon but it shares a certain structural property with aromatic hydrocarbons Try constructing molecular models of dioxin and anthracene to see these similarities... 

Many valuable chemicals can be recovered from the volatile fractions produced in coke ovens. Eor many years coal tar was the primary source for chemicals such as naphthalene [91-20-3] anthracene [120-12-7] and other aromatic and heterocycHc hydrocarbons. The routes to production of important coal-tar derivatives are shown in Eigure 1. Much of the production of these chemicals, especially tar bases such as the pyridines and picolines, is based on synthesis from petroleum feedstocks. Nevertheless, a number of important materials continue to be derived from coal tar. 

Naphthalene, anthracene, carbazole [86-74-8] phenol [108-95-2] and cresyUc acids are found in the tar. Phenol and cresyUc acids are useful as chemical and resin intermediates. The aromatic chemicals are useful in the manufacture of pharmaceuticals, dyes, fragrances, and pesticides. Various grades of pitch are made from residues of tar refining. Coal-tar pitch is used for roofing and road tar, and as a binder mixed with petroleum coke to produce anodes for the aluminum industry. 

Ring formation readily occurs ia the alkylation of aromatics with di- and polyhaUdes, eg, the reaction of di- and ttihalomethanes with aromatics ia the presence of aluminum chloride. In the reaction of dichioromethane and ben2ene, besides diaryknethanes, anthracene derivatives are also formed (54). 

Examples include luminescence from anthracene crystals subjected to alternating electric current (159), luminescence from electron recombination with the carbazole free radical produced by photolysis of potassium carba2ole in a fro2en glass matrix (160), reactions of free radicals with solvated electrons (155), and reduction of mtheiiium(III)tris(bipyridyl) with the hydrated electron (161). Other examples include the oxidation of aromatic radical anions with such oxidants as chlorine or ben2oyl peroxide (162,163), and the reduction of 9,10-dichloro-9,10-diphenyl-9,10-dihydroanthracene with the 9,10-diphenylanthracene radical anion (162,164). Many other examples of electron-transfer chemiluminescence have been reported (156,165). 

Tetrahydronaphthalene [119-64-2] (Tetralin) is a water-white Hquid that is insoluble in water, slightly soluble in methyl alcohol, and completely soluble in other monohydric alcohols, ethyl ether, and most other organic solvents. It is a powerhil solvent for oils, resins, waxes, mbber, asphalt, and aromatic hydrocarbons, eg, naphthalene and anthracene. Its high flash point and low vapor pressure make it usehil in the manufacture of paints, lacquers, and varnishes for cleaning printing ink from rollers and type in the manufacture of shoe creams and floor waxes as a solvent in the textile industry and for the removal of naphthalene deposits in gas-distribution systems (25). The commercial product typically has a tetrahydronaphthalene content of >97 wt%, with some decahydronaphthalene and naphthalene as the principal impurities. 

When sublimed, anthraquinone forms a pale yeUow, crystalline material, needle-like in shape. Unlike anthracene, it exhibits no fluorescence. It melts at 286°C and boils at 379°—381°C. At much higher temperatures, decomposition occurs. Anthraquinone has only a slight solubiUty in alcohol or benzene and is best recrystallized from glacial acetic acid or high boiling solvents such as nitrobenzene or dichlorobenzene. It is very soluble in concentrated sulfuric acid. In methanol, uv absorptions of anthraquinone are at 250 nm (e = 4.98), 270 nm (4.5), and 325 nm (4.02) (4). In the it spectmm, the double aUyflc ketone absorbs at 5.95 p.m (1681 cm ), and the aromatic double bond absorbs at 6.25 p.m (1600 cm ) and 6.30 pm (1587 cm ). 

The addition product, C QHgNa, called naphthalenesodium or sodium naphthalene complex, may be regarded as a resonance hybrid. The ether is more than just a solvent that promotes the reaction. StabiUty of the complex depends on the presence of the ether, and sodium can be Hberated by evaporating the ether or by dilution using an indifferent solvent, such as ethyl ether. A number of ether-type solvents are effective in complex preparation, such as methyl ethyl ether, ethylene glycol dimethyl ether, dioxane, and THF. Trimethyl amine also promotes complex formation. This reaction proceeds with all alkah metals. Other aromatic compounds, eg, diphenyl, anthracene, and phenanthrene, also form sodium complexes (16,20). 

Dyes, Dye Intermediates, and Naphthalene. Several thousand different synthetic dyes are known, having a total worldwide consumption of 298 million kg/yr (see Dyes AND dye intermediates). Many dyes contain some form of sulfonate as —SO H, —SO Na, or —SO2NH2. Acid dyes, solvent dyes, basic dyes, disperse dyes, fiber-reactive dyes, and vat dyes can have one or more sulfonic acid groups incorporated into their molecular stmcture. The raw materials used for the manufacture of dyes are mainly aromatic hydrocarbons (67—74) and include ben2ene, toluene, naphthalene, anthracene, pyrene, phenol (qv), pyridine, and carba2ole. Anthraquinone sulfonic acid is an important dye intermediate and is prepared by sulfonation of anthraquinone using sulfur trioxide and sulfuric acid. 

Some polynuclear aromatics, such as anthracene, can be brominated without a catalyst (23)... 

At pressures of 13 GPa many carbonaceous materials decompose when heated and the carbon eventually turns into diamond. The molecular stmcture of the starting material strongly affects this process. Thus condensed aromatic molecules, such as naphthalene or anthracene, first form graphite even though diamond is the stable form. On the other hand, aUphatic substances such as camphor, paraffin wax, or polyethylene lose hydrogen and condense to diamond via soft, white, soHd intermediates with a rudimentary diamond stmcture (29). 

---