Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Amphiphilic alkylation

Amphiphilic alkylation (13,203).2 Addition of Grignard reagents to a-methyl substituted aldehydes proceeds with modest syn-selectivity (—2—3 1). In contrast, the addition to the same aldehydes complexed with MAD or MAT shows antiselectivity (equation I). Yields are also improved by complexation. [Pg.207]

A highly effective catalytic method for alkynylation of epoxides has recently been reported this involves the chelation-controlled alkylation of hetero-substituted epoxides with Mc3A1 and alkynyllithiums via pentacoordinate organoaluminum complexes [82]. For instance, reaction of epoxy ether, (l-benzyloxy)-3-butene oxide (75) in toluene with PhC = CLi under the influence of catalytic MesAl (10 mol%) proceeded smoothly at 0 °C for 5 h to furnish the alkynylation product l-(benzyloxy)-6-phenylhex-5-yn-3-ol (76) in 76 % yield. The yield of the product was very low (3 %) without MeaAl as catalyst under similar conditions. This is the first catalytic procedure for amphiphilic alkylation of epoxides. The participation of pentacoordinate MesAl complexes of epoxy ethers of type 75 is emphasized by comparing the reactivity with the corresponding simple epoxide, 5-phenyl-l-pentene oxide (77), which was not susceptible to nucleophilic attack of PhC s CLi with catalytic Me3Al under similar conditions (Sch. 50). [Pg.220]

This approach has been quite useful in the stereoselective alkylation of steroidal ketones. Reaction of 3-cholestanone (128) with MeLi gave predominantly 3/8-methyl-cholestan-3a-ol (129, axial alcohol), whereas amphiphilic alkylation of the ketone with MAD-MeLi or MAT-MeLi afforded 3a-methylcholestan-3/3-ol (130, equatorial alcohol) exclusively (Sch. 89) [125b]. [Pg.239]

In the course of the synthesis of ( )-3a-acetoxy-15/3-hydroxy-7,16-secotrinervita-7,11-diene, a defense substance isolated from the soldier termite, the need to introduce the methyl group from the hindered a side was achieved for the first time when the amphiphilic alkylation system MAD-MeLi was used (Sch. 90) [126]. [Pg.240]

In the alkylation of a-chiral aldehydes with no ability to chelate with organometal-lic compounds such as Grignard reagents, erythro alcohols are usually obtained preferentially according to the Cram s rule [127], and high Cram selectivity can be achieved with alkyltitanium reagents developed by Reetz [128]. In contrast, application of amphiphilic alkylation to a-chiral aldehydes enables one to achieve the hitherto difficult anti-Cram selectivity, affording threo alcohols selectively as shown in Sch. 91 [125]. [Pg.240]

Another interesting feature of the amphiphilic alkylation of carbonyl compounds using MAD is its chemoselectivity. For instance, in the alkylation of polyfunctional molecules such as keto-aldehydes 131, the aldehyde carbonyl was selectively methylated with the MAD-MeLi system to give the secondary keto alcohol 132 in 72 % yield (Sch. 93) [130]. [Pg.241]

This hypothesis has been supported by experiments with a modified bimetallic, two-center system. Initial treatment of bis(dimethylaluminum) derivative 188 with 1 equiv. MeLi generates a new amphiphilic alkylation system 199 which has both electrophilic and nucleophilic centers in one reagent (Sch. 150). This system is found to be much more effective than symmetric 188, and the carbonyl alkylation of aldehydes proceeds even at -78 to -40 °C. A similar process with monoalmninum derivative 190 and its complex with MeLi, however, gave a trace of methylation product 200 (R = Ph) (< 3 % yield), indicating that appropriate internal arrangement of the two metal centers is essential to achieve this remarkable rate enhancement in the new amphiphilic alkylation. [Pg.276]

Vineland, NJ) or over-the-counter cosmetic creams promoted for improved hydration (L Oreal, Paris and Dior, Paris). More recently, parenteral liposome formulations of amphotericin B, doxorubicin, and dau-norubicin have been approved and marketed (ABELCET, Elan, the Liposome Co., Inc, Princeton, NJ AmBisome and DaunoXome, Nexstar/Fujisawa, Deerfield Park, IL Amphotec and Doxil, Sequus/ Alza, Menlo Park, CA), with others on the horizon for applications in photodynamic therapy. Although the vast majority of liposome preparations are constructed from phospholipids, other nonphospholipid materials can be used either alone or in mixtures to form bilayer arrays. One such example is Amphotec, which utilizes sodium cholesteryl sulfate as the primary lipid. Other liposome forming materials may include but are not limited to fatty-acid compositions, ionized fatty acids, or fatty acyl amino acids, longchain fatty alcohols plus surfactants, ionized lysophospholipids or combinations, non-ionic or ionic surfactants and amphiphiles, alkyl maltosides, a-tocopherol esters, cholesterol esters, polyoxyethylene alkyl ethers, sorbitan alkyl esters, and polymerized phospholipid compositions. ° ... [Pg.984]

The value of Tk increases as the amphiphile hydrophobic chain length increases. The Krafft points of the sodium salts of the classic amphiphiles (alkyl sulfates, sulfonates, and benzenesulfonates) are usually below room temperature. The Krafft point is a function of the counter-ion. Alkaline earth cations give higher Krafft points for sodium laurylsulfate, 7 k = 9°C the values for the calcium, strontium, and barium salts are 50, 64, and 105°C, respectively. [Pg.46]

Core-multishell architectures (CMS) have been developed based on hyper-branched polymers, such as poly(ethylene imine) (PEI) and PG with an amphiphilic alkyl-PEG shell. These CMS nanocarriers can encapsulate a wide range of hydrophobic and hydrophilic substances that can be transported in both organic solvents and aqueous systems [36, 37] (Eig. 6.15). [Pg.260]

A unique but widely studied polymeric LB system are the polyglutamates or hairy rod polymers. These polymers have a hydrophilic rod of helical polyglutamate with hydrophobic alkyl side chains. Their rigidity and amphiphilic-ity imparts order (lyotropic and thermotropic) in LB films and they take on a F-type stmcture such as that illustrated in Fig. XV-16 [182]. These LB films are useful for waveguides, photoresists, and chemical sensors. LB films of these polymers are very thermally stable, as was indicated by the lack of interdiffusion up to 414 K shown by neutron reflectivity of alternating hydrogenated and deuterated layers [183]. AFM measurements have shown that these films take on different stmctures if directly deposited onto silicon or onto LB films of cadmium arachidate [184]. [Pg.561]

A monolayer of the pyridine-substituted alkyl merocyanine (12) was prepared in the 1970s (67), and a noncentro symmetric multilayer stmcture of merocyanine amphiphiles was later prepared (68) using derivatives, but introducing long-chain amines as the counter layer in an ABABAB system (69,70). [Pg.535]

The pioneering work on amphiphilic polyelectrolytes goes back to 1951, when Strauss et al. [25] first synthesized amphiphilic polycations by quaternization of poly(2-vinylpyridine) with n-dodecyl bromide. They revealed that the long alkyl side chains attached to partially quaternized poly(vinylpyridine)s tended to aggregate in aqueous solution so that the polymers assumed a compact conformation when the mole fraction of the hydrophobic side chains exceeded a certain critical value. Thus, Strauss et al. became the first to show experimentally the intramolecular micellation of amphiphilic polymers and the existence of a critical content of hydrophobic residues which may be compared to the critical micelle concentration of ordinary surfactants. They called such amphiphilic polyelectrolytes polysoaps [25],... [Pg.63]

These poly(2-alkyl-2-oxazoline) silane coupling agents were copolycondensed with tetraethoxysilane by acid-catalyst to produce poly(2-alkyl-2-oxazoline)-modified silica gel. The composite gel from 2-ethyl-2-oxazoline was also homogeneous and transparent glass. Poly(2-alkyl-2-oxazoline)-modified silica gels, especially gels based on poly(2-ethyl-2-oxazoline) absorbed water and also organic solvents such as DMF or alcohols as shown in Table 7. This result means that the obtained composite gel shows the amphiphilic adsorption property. [Pg.26]

Sodium a-sulfonated fatty acid esters of long-chain alcohols have a structural effect on the Krafft point different from that of amphiphiles with short alkyl chains [60]. In a series of homologs with the same total carbon number the Krafft points are highest when the hydrophilic alkyl chain lengths in the a-sulfonated fatty acid and the alcohol are fairly long and equal. In this case the packing of the molecules becomes close and tight. [Pg.477]

In the case of amphiphilic molecules, characterized by the coexistence of spatially separated apolar (alkyl chains) and polar moieties, both parts cooperate to drive the intermolecular aggregation. This simple but pivotal peculiarity makes amphiphilic molecules soluble in both polar and apolar solvents and able to realize, in suitable conditions, an impressive variety of molecular aggregates characterized by spatially separated apolar and polar domains, local order at short times and fluidity at long times, and differences in size, shape (linear or branched chains, cyclic or globular aggregates, extended fractal-like molecular networks), and lifetime. [Pg.473]

The main peculiarity of solutions of reversed micelles is their ability to solubilize a wide class of ionic, polar, apolar, and amphiphilic substances. This is because in these systems a multiplicity of domains coexist apolar bulk solvent, the oriented alkyl chains of the surfactant, and the hydrophilic head group region of the reversed micelles. Ionic and polar substances are hosted in the micellar core, apolar substances are solubilized in the bulk apolar solvent, whereas amphiphilic substances are partitioned between the bulk apolar solvent and the domain comprising the alkyl chains and the surfactant polar heads, i.e., the so-called palisade layer [24],... [Pg.475]

The use of ordered supramolecular assemblies, such as micelles, monolayers, vesicles, inverted micelles, and lyotropic liquid crystalline systems, allows for the controlled nucleation of inorganic materials on molecular templates with well-defined structure and surface chemistry. Poly(propyleneimine) dendrimers modified with long aliphatic chains are a new class of amphiphiles which display a variety of aggregation states due to their conformational flexibility [38]. In the presence of octadecylamine, poly(propyleneimine) dendrimers modified with long alkyl chains self-assemble to form remarkably rigid and well-defined aggregates. When the aggregate dispersion was injected into a supersaturated... [Pg.153]

A polynucleoside with an unnatural polymeric backbone was synthesized by SBP-catalyzed oxidative polymerization of thymidine 5 -p-hydroxyphenylacetate. Chemoenzymafic synthesis of a new class of poly(amino acid), poly(tyrosine) containing no peptide bonds, was achieved by the peroxidase-catalyzed oxidative polymerization of tyrosine ethyl esters, followed by alkaline hydrolysis. Amphiphile higher alkyl ester derivatives were also polymerized in... [Pg.236]

According to the colloid scientist Winsor, surfactants are defined as compounds which possess in the same molecule distinct regions of hydrophilic and lipophilic character. For example, in the oleate ion there is an alkyl chain that is basically hydrophobic (lipophilic tail) and a COO" headgroup that is hydrophilic (lipo-phobic). Being amphiphilic in nature, surfactants have the ability to modify the interface between various phases [66]. Their effects on the interface are the result of their ability to orient themselves in accordance with the polarities of the two opposing phases. The polar part can be expected to be oriented towards the more polar (hydrophilic, aqueous) phase, whereas the nonpolar tails should direct towards the nonpolar (lipophilic, oil) phase. [Pg.256]

Phospholipids are amphiphilic substances i.e. their molecules contain both hydrophilic and hydrophobic groups. Above a certain concentration level, amphiphilic substances with one ionized or polar and one strongly hydrophobic group (e.g. the dodecylsulphate or cetyltrimethylammonium ions) form micelles in solution these are, as a rule, spherical structures with hydrophilic groups on the surface and the inside filled with the hydrophobic parts of the molecules (usually long alkyl chains directed radially into the centre of the sphere). Amphiphilic substances with two hydrophobic groups have a tendency to form bilayer films under suitable conditions, with hydrophobic chains facing one another. Various methods of preparation of these bilayer lipid membranes (BLMs) are demonstrated in Fig. 6.10. [Pg.450]

In our earlier efforts to synthesize dendritic amphiphiles, we described a triden-dron (43) which was prepared by a two-step (alkylation-amidation or triester-tris) reaction sequence applied to l,3,5-tris(bromomethyl)benzene [117]. TEM and light scattering experiments suggested that 43 aggregated by stacking of its hydrophilic exterior into a spherical array of ca. 20 nm (diameter) reminiscent of globular micelles. [Pg.54]


See other pages where Amphiphilic alkylation is mentioned: [Pg.29]    [Pg.48]    [Pg.164]    [Pg.371]    [Pg.133]    [Pg.421]    [Pg.47]    [Pg.572]    [Pg.1738]    [Pg.29]    [Pg.48]    [Pg.164]    [Pg.371]    [Pg.133]    [Pg.421]    [Pg.47]    [Pg.572]    [Pg.1738]    [Pg.125]    [Pg.126]    [Pg.353]    [Pg.532]    [Pg.535]    [Pg.538]    [Pg.79]    [Pg.42]    [Pg.154]    [Pg.227]    [Pg.227]    [Pg.285]    [Pg.231]    [Pg.231]    [Pg.265]    [Pg.266]    [Pg.271]    [Pg.275]   
See also in sourсe #XX -- [ Pg.207 ]




SEARCH



© 2024 chempedia.info