Of inorganic materials

Table 8.7 Proton Transfer Reactions of Inorganic Materials in Water at 25°C 8.18...

Table 8.30 Half-Wave Potentials of Inorganic Materials 8.141...

J. W. Evans and L. C. Dejonghe, The Production of Inorganic Materials Macmillan Publishing Co., New York, 1991. 

Table 3. Second Harmonic Generation Coefficients of Inorganic Materials...

Petroleum asphalts, compared to native asphalts, are organic with only trace amounts of inorganic materials. They derive their characteristics from the nature of their cmde origins with some variation possible by choice of manufacturing process. Although there are a number of refineries or refinery units whose prime function is to produce asphalt, petroleum asphalt is primarily a product of integrated refineries (Fig. 1). Cmdes may be selected for these refineries for a variety of other product requirements and the asphalt (or residuum) produced may vary somewhat in characteristics from one refinery-cmde system to another and even by cut-point (Table 2) and asphalt content (Fig. 2) (5,6). The approximate asphalt yields (%) from various cmde oils are as follows ... 

Large amounts of inorganic materials are consumed in both intermediates and dyes manufacture. 

Breusov, O.N., Physical-Chemical Transformation of Inorganic Materials Under Shock Waves, in Proceedings, Second All-Union Symposium on Combustion and Explosion (edited by Stesik, L.N.), Chernogolovka, 1971, pp. 289-293, Translation, Sandia National Laboratories Report No. RS3144/79/43. 

Yes, in combination with ion-beam sputtering 300 A for Auger analysis, even less for imaging Yes, called Scanning Auger Microscopy, SAM Sample requirements Vacuum-compatible materials Main use Elemental composition of inorganic materials... 

United States at least. The huge field of inorganic materials synthesis is not further discussed in this chapter, but the interested reader will benefit from reading a survey entitled Inorganic materials synthesis learning from case studies (Roy 1996). 

Rao, C.N.R. (1994) Chemical Approaches to the Synthesis of Inorganic Materials (Wiley, New York). 

Fillers. Some fillers, such as short fibres or flakes of inorganic materials, improve the mechanical properties of a plastic. Others, called extenders, permit a large volume of a plastic to be produced with relatively little actual resin. Calcium carbonate, silica and clay are frequently used extenders. 

Making of Inorganic Materials by Electrochemical Methods 6.2.1.3 Electrodeposition of less noble elements... 

---