Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Alcohol use

Derived from an aldehyde or ketone and an alcohol using an acid catalyst. Ethylene glycol or 1,3-dihydroxypropane are frequently used to give 5-or 6-member cyclic products. [Pg.10]

KCl —NaCl —MgS04) and in many brines. Separated by fractional crystallization, soluble water and lower alcohols. Used in fertilizer production and to produce other potassium salts. [Pg.324]

The alcohol used must be absolute a lower grade gives a poor yield. [Pg.250]

Treat the combined distiUates of b.p. 195-260° with anhydrous potassium carbonate to neutralise the Uttle formic acid present and to salt out the allyl alcohol. Distil the latter through a fractionating column and collect the fraction of b.p, up to 99° separately this weighs 210 g, and consists of 70 per cent, allyl alcohol. To obtain anli5 dious allyl alcohol, use either of the following procedures —... [Pg.459]

For the past year Strike had been in consultation with contract labs over the making of phenylisopropyl alcohols using sulfuric acid and allylbenzenes (don t ask). The lab owners would listen patiently as Strike primitively described how and why an OH should go on the beta carbon. And without exception, the lab owners would point out to Strike that the best way to get an OH on the beta carbon would be to put a Br there first. But Strike don t wanna put a Br there first Strike would say, Strike wants the OH put on directly using sulfuric acid " The lab guys had to do what Strike said because Strike was holding all the money (...a fool and her money etc.). But out of curiosity Strike asked how they would get that Br on the beta carbon. Every one of them said it was simply a matter of using the 48% HBr in acetic acid. They even showed Strike their stock solutions (usually from Aldrich or Fisher). [Pg.144]

In peptide syntheses, where partial racemization of the chiral a-carbon centers is a serious problem, the application of 1-hydroxy-1 H-benzotriazole ( HBT") and DCC has been very successful in increasing yields and decreasing racemization (W. Kdnig, 1970 G.C. Windridge, 1971 H.R. Bosshard, 1973), l-(Acyloxy)-lif-benzotriazoles or l-acyl-17f-benzo-triazole 3-oxides are formed as reactive intermediates. If carboxylic or phosphoric esters are to be formed from the acids and alcohols using DCC, 4-(pyrrolidin-l -yl)pyridine ( PPY A. Hassner, 1978 K.M. Patel, 1979) and HBT are efficient catalysts even with tert-alkyl, choles-teryl, aryl, and other unreactive alcohols as well as with highly bulky or labile acids. [Pg.145]

The o-keto ester 513 is formed from a bulky secondary alcohol using tricy-clohexylphosphine or triarylphosphine, but the selectivity is low[367-369]. Alkenyl bromides are less reactive than aryl halides for double carbonyla-tion[367], a-Keto amides are obtained from aryl and alkenyl bromides, but a-keto esters are not obtained by their carbonylation in alcohol[370]. A mechanism for the double carbonylation was proposed[371,372],... [Pg.199]

Synthesis of alcohols using organolithi um reagents (Section 14 7) Organolithi um reagents react with aldehydes and ketones in a manner similar to that of Grignard reagents to produce alcohols... [Pg.616]

Outline the steps in the preparation of each of the constitutionally isomeric ethers of molec ular formula C4H10O starting with the appropriate alcohols Use the Williamson ether synthesis as your key reaction... [Pg.696]

Gunzherg s reagent (detection of HCl in gastric juice) dissolve 4 g of phloroglucinol and 2 g of vanillin in 100 mL of absolute alcohol use only a freshly prepared solution. [Pg.1191]

By-product acetic acid is obtained chiefly from partial hydrolysis of cellulose acetate [9004-35-7]. Lesser amounts are obtained through the reaction of acetic anhydride and cellulose. Acetylation of saHcyHc acid [69-72-7] produces one mole of acetic acid per mole of product and the oxidation of allyl alcohol using peracetic acid to yield glycerol furnishes by-product acid, but the net yield is low. [Pg.69]

Most of the detergent range alcohols used commercially consist of mixtures of alcohols, and a wide variety of products is available. Table 6 shows the approximate carbon chain length composition of both the commonly used mixtures and single carbon materials typical properties are given ia Table 7. [Pg.444]

Bromohydrins can be prepared direcdy from polyhydric alcohols using hydrobromic acid and acetic acid catalyst, followed by distillation of water and acetic acid (21). Reaction conditions must be carehiUy controlled to avoid production of simple acetate esters (22). The raw product is usually a mixture of the mono-, di-and tribromohydrins. [Pg.464]

Reduction Reactions. Aldehydes can be hydrogenated to the corresponding alcohol using a heterogeneous catalyst, for example... [Pg.470]

Cla.ssifica.tlon, In commerce, several classifications of flavoring and compounded flavorings are Hsted according to composition to allow the user to conform to state and federal food regulations and labeling requirements, as well as to show their proper appHcation. Both suppHer and purchaser are subject to the control of the FDA, USD A, and the Bureau of Alcohol, Tobacco, and Firearms (BATF). The latter regulates the alcohoHc content of flavors and the tax drawbacks on alcohol, ie, return of a portion of the tax paid on ethyl alcohol used in flavoring. [Pg.15]

Attempts have been made to develop methods for the production of aromatic isocyanates without the use of phosgene. None of these processes is currently in commercial use. Processes based on the reaction of carbon monoxide with aromatic nitro compounds have been examined extensively (23,27,76). The reductive carbonylation of 2,4-dinitrotoluene [121 -14-2] to toluene 2,4-diaLkylcarbamates is reported to occur in high yield at reaction temperatures of 140—180°C under 6900 kPa (1000 psi) of carbon monoxide. The resultant carbamate product distribution is noted to be a strong function of the alcohol used. Mitsui-Toatsu and Arco have disclosed a two-step reductive carbonylation process based on a cost effective selenium catalyst (22,23). [Pg.454]

Three generations of latices as characterized by the type of surfactant used in manufacture have been defined (53). The first generation includes latices made with conventional (/) anionic surfactants like fatty acid soaps, alkyl carboxylates, alkyl sulfates, and alkyl sulfonates (54) (2) nonionic surfactants like poly(ethylene oxide) or poly(vinyl alcohol) used to improve freeze—thaw and shear stabiUty and (J) cationic surfactants like amines, nitriles, and other nitrogen bases, rarely used because of incompatibiUty problems. Portiand cement latex modifiers are one example where cationic surfactants are used. Anionic surfactants yield smaller particles than nonionic surfactants (55). Often a combination of anionic surfactants or anionic and nonionic surfactants are used to provide improved stabiUty. The stabilizing abiUty of anionic fatty acid soaps diminishes at lower pH as the soaps revert to their acids. First-generation latices also suffer from the presence of soap on the polymer particles at the end of the polymerization. Steam and vacuum stripping methods are often used to remove the soap and unreacted monomer from the final product (56). [Pg.25]

Other Higher Oleiins. Linear a-olefins, such as 1-hexene and 1-octene, are produced by catalytic oligomerization of ethylene with triethyl aluminum (6) or with nickel-based catalysts (7—9) (see Olefins, higher). Olefins with branched alkyl groups are usually produced by catalytic dehydration of corresponding alcohols. For example, 3-methyl-1-butene is produced from isoamyl alcohol using base-treated alumina (15). [Pg.425]

However, a second mole of alcohol or hemiformal caimot be added at the ordinary pH of such solutions. The equiUbrium constant for hemiformal formation depends on the nature of the R group of the alcohol. Using nmr spectroscopy, a group of alcohols including phenol has been examined in solution with formaldehyde (15,16). The spectra indicated the degree of hemiformal formation in the order of >methanol > benzyl alcohol >phenol. Hemiformal formation provides the mechanism of stabilization methanol is much more effective than phenol in this regard. [Pg.293]

This chemical bond between the metal and the hydroxyl group of ahyl alcohol has an important effect on stereoselectivity. Asymmetric epoxidation is weU-known. The most stereoselective catalyst is Ti(OR) which is one of the early transition metal compounds and has no 0x0 group (28). Epoxidation of isopropylvinylcarbinol [4798-45-2] (1-isopropylaHyl alcohol) using a combined chiral catalyst of Ti(OR)4 and L-(+)-diethyl tartrate and (CH2)3COOH as the oxidant, stops at 50% conversion, and the erythro threo ratio of the product is 97 3. The reason for the reaction stopping at 50% conversion is that only one enantiomer can react and the unreacted enantiomer is recovered in optically pure form (28). [Pg.74]

Other examples of oxidation of amyl alcohols using hydrogen peroxide (54), Ru02/NaCl0 (55), BaMnO (56), and chromic acid (57,58) have been described for laboratory synthesis, but have not been utili2ed commercially. [Pg.373]

The newer HFC refrigerants are not soluble in or miscible with mineral oils or alkylbenzenes. The leading candidates for use with HFC refrigerants are polyol ester lubricants. These lubricants are derived from a reaction between an alcohol and a normal or branched carboxyflc acid. The most common alcohols used are pentaerythritol, trimethylolpropane, neopentjlglycol, and glycerol. The acids are usually selected to give the correct viscosity and fluidity at low temperatures. [Pg.69]

The most important derivatives of the carboxyl group are formed by esterification with monohydric or polyhydric alcohols. Typical alcohols used iaclude methyl alcohol, ethylene glycol, glycerol, and pentaerythritol. These rosia esters have a wide range of softening poiats and compatibiUties. [Pg.140]

The esters of sahcyhc acid account for an increasing fraction of the sahcyhc acid produced, about 15% in the 1990s. Typically, the esters are commercially produced by esterification of sahcyhc acid with the appropriate alcohol using a strong mineral acid such as sulfuric as a catalyst. To complete the esterification, the excess alcohol and water are distilled away and recovered. The cmde product is further purified, generally by distillation. For the manufacture of higher esters of sahcyhc acid, transestetification of methyl sahcylate with the appropriate alcohol is the usual route of choice. However, another reaction method uses sodium sahcylate and the corresponding alkyl hahde to form the desired ester. [Pg.288]


See other pages where Alcohol use is mentioned: [Pg.57]    [Pg.156]    [Pg.204]    [Pg.324]    [Pg.511]    [Pg.594]    [Pg.595]    [Pg.597]    [Pg.398]    [Pg.374]    [Pg.102]    [Pg.428]    [Pg.433]    [Pg.449]    [Pg.450]    [Pg.455]    [Pg.293]    [Pg.185]    [Pg.453]    [Pg.476]    [Pg.476]    [Pg.103]    [Pg.392]    [Pg.27]    [Pg.500]    [Pg.39]   


SEARCH



ALCOHOL SYNTHESIS USING GRIGNARD REAGENTS

Alcohol Dehydration using New Shape Selective Zeolites

Alcohol Use Disorders

Alcohol burner, using

Alcohol dehydration using zeolite

Alcohol determination using analyzers

Alcohol polyethylene using styrene

Alcohol use and alcoholism

Alcohol use/abuse

Alcohol/drug use

Alcohols allylic carbonates, protection using

Alcohols synthesis using organoboranes

Alcohols using DCCI

Alcohols, From reduction of aldehydes Reagents which can be used to reduce

Amino alcohols, reduction using

Brefeldin use of alcohol protection

Chemical manufacturing, chemicals used methyl alcohol

Chiral alcohols, preparation using catalytic

Distillation alcohol production using

Enantioselective cyclopropanation of allylic alcohols using chiral catalysts

Epoxides using allylic alcohols

Equatorial alcohols, preparation by use

Equatorial alcohols, preparation by use of the lithium aluminum hydridealuminum chloride reagent

Esterification of alcohol with acetic anhydride using a fluorous scandium catalyst

Esterification of alcohols using heterogeneous acid catalyst

Gasohol alcohol used

History of Alcohol Use

Homoallylic alcohols use of tosylhydrazones

Iodination, alcohols using

Iodination, alcohols using applications

Microbial Deracemization of Secondary Alcohols Using a Single Microorganism

Modern Oxidation of Alcohols using Environmentally Benign Oxidants

Monoterpene alcohols, analysis using

Other Alcohol Oxidations Using Activated DMSO

Other Hypervalent Iodine Compounds Used for Oxidation of Alcohols

Other Methods Used to Convert Alcohols into Alkyl Halides

Oxidation of alcohols using dimethyl sulfoxide

Pharmacotherapy for alcohol use disorders

Phosphorus oxychloride, dehydration alcohols using

Phosphorus trihalides, alcohol halide using

Propargylic alcohols, use

SYNTHESIS OF ALCOHOLS USING GRIGNARD REAGENTS

Simple paper chromatography where alcohol is used as a solvent to separate the colors in an ink

Syntheses using alcohols

Synthesis of Alcohols Using Grignard and Organolithium Reagents

Synthesis of Alcohols Using Organolithium Reagents

TABLES omposition of Alcohols Intended for Ordnance Use El

The use of an alcohol and hydrogen chloride

Tinctures, alcohol making/using

Transesterification alcohol used

Types of Alcohols Used

Use of Model Alcohols in Mechanistic Studies

Use of Water-Soluble Amino-Substituted Poly(vinyl alcohol)

© 2024 chempedia.info