Alcohol polyethylene using styrene

TABLE I. Acid Effect in Radiation Grafting to Polyethylene using Styrene in Low Molecular Weight Alcohols.a... 

Both Odian and Silverman models satisfactorily explain most of the observed results in all solvents (Tables I-III, VI) used in the present study, however there are some exceptions especially when solvents other than the alcohols are used (Table VI). Thus the Odian mechanism is not consistent with the DMF data nor can the Silverman model account for the acetone results. In addition, in further preliminary studies with grafting of styrene to polyethylene (10) in solvents other than those reported here both Odian and Silverman mechanisms are deficient. The problem is that possible contributions from the radiation chemistry of the components in the grafting reaction need to be considered in formulating a complete mechanism for the overall process. 

Lubricants can be fatty acids such as stearic acid or hydroxy stearic acid, esters such as stearates, amides or alcohols. Copolymers of styrene and an acrylate can be used. Paraffin and the montan waxes, ethylene bis-stearamide (EBS, or amide wax ), the oxidised polyethylene waxes, and other polyolefin waxes are also employed. 

Double bonds characterize the basic building blocks of the petrochemical business. Ethylene, for example, is the chemical compound used to make vinyl chloride, ethylene oxide, acetaldehyde, ethyl alcohol, styrene, alpha olefins, and polyethylene, to name only a few. Propylene and benzene, the other big-volume building blocks, also have the characteristic double bonds. 

The chemical uses for ethylene prior to World War II were limited, for the most part, to ethylene glycol and ethyl alcohol. After the war, the demand for styrene and polyethylene took off, stimulating ethylene production and olefin plant construction. Todays list of chemical applications for ethylene reads like the WTiat s What of petrochemicals polyethylene, ethylbenzene (a precursor to styrene), ethylene dichloride, vinyl chloride, ethylene oxide, ethylene glycol, ethyl alcohol, vinyl acetate, alpha olefins, and linear alcohols are some of the more commercial derivatives of ethylene. The consumer products derived from these chemicals are found everywhere, from soap to construction materials to plastic products to synthetic motor oils. 

Ethylene is used in the manufacture of a wide range of chemicals (Fig. 3) including polyethylene (Figs. 4 and 5), styrene, alcohols, ethylene oxide, and vinyl chloride. 

More industrial polyethylene copolymers were modeled using the same method of ADMET polymerization followed by hydrogenation using catalyst residue. Copolymers of ethylene-styrene, ethylene-vinyl chloride, and ethylene-acrylate were prepared to examine the effect of incorporation of available vinyl monomer feed stocks into polyethylene [81]. Previously prepared ADMET model copolymers include ethylene-co-carbon monoxide, ethylene-co-carbon dioxide, and ethylene-co-vinyl alcohol [82,83]. In most cases,these copolymers are unattainable by traditional chain polymerization chemistry, but a recent report has revealed a highly active Ni catalyst that can successfully copolymerize ethylene with some functionalized monomers [84]. Although catalyst advances are proving more and more useful in novel polymer synthesis, poor structure control and reactivity ratio considerations are still problematic in chain polymerization chemistry. 

Use Manufacture of polyethylene, polypropylene, ethylene oxide, ethylene dichloride, ethylene glycols, aluminum alkyls, vinyl chloride, vinyl acetate, ethyl chloride, ethylene chlorohydrin, acetaldehyde, ethyl alcohol, polystyrene, styrene, polyvinyl chloride, SBR, polyester resins, trichloroethylene, etc. as a refrigerant, in welding and cutting of metals, an anesthetic, and in orchard sprays to accelerate fruit ripening. 

Polystyrene is the name of a homopolymer made from the single monomer styrene. When the name of a monomer comprises two or more words, the name should be enclosed in parentheses, as in poly(methyl methacrylate) or poly(4-bromostyrene) to identify the monomer more clearly. This method can result in several names for a given polymer thus, poly(ethylene glycol) , poly(ethylene oxide) and poly(oxirane) describe the same polymer. Sometimes, the name of a hypothetical monomer is used, as in poly(vinyl alcohol) Even though a name like polyethylene covers a multitude of materials, the system does provide understandable names when a single monomer is involved in the synthesis of a single polymer. When one monomer can yield more than one polymer, e.g. 1,3-butadiene or acrolein, some sort of structural notation must be used to identify the product, and one is not far from a formal structure-based name. 

Alkanolamines are used as cross-linking and hardener accelerators in epoxy resins applications. Improved thermal and oxidative stability of polyvinyl alcohol, poly(phenylene ether), polystyrene, polypropylene, and polyethylene polymers are achieved by the addition of small amounts of the alkanolamines. Diethanolamine and morpholine act as initiators for the preparation of poly (alkyl methacrylate) in bulk or solution polymerization. The ethanolamines are efficient initiators for the preparation of polyvinyl chloride. Alkanolamines promote cross-linking of styrene copolymers with polystyrene or polyvinyl alcohol. Addition of alkanolamines to phenolic formaldehyde or urea formaldehyde resins affords improved electrical properties and increased water solubility. 

---