Acrylonitrile-chloroprene elastomer

NCR acrylonitrile-chloroprene elastomer NMW narrow molecular weight... 

Many synthetic latices exist (7,8) (see Elastomers, synthetic). They contain butadiene and styrene copolymers (elastomeric), styrene—butadiene copolymers (resinous), butadiene and acrylonitrile copolymers, butadiene with styrene and acrylonitrile, chloroprene copolymers, methacrylate and acrylate ester copolymers, vinyl acetate copolymers, vinyl and vinyUdene chloride copolymers, ethylene copolymers, fluorinated copolymers, acrylamide copolymers, styrene—acrolein copolymers, and pyrrole and pyrrole copolymers. Many of these latices also have carboxylated versions. 

Over 5.5 billion pounds of synthetic rubber is produced annually in the United States. The principle elastomer is the copolymer of butadiene (75%) and styrene (25) (SBR) produced at an annual rate of over 1 million tons by the emulsion polymerization of butadiene and styrene. The copolymer of butadiene and acrylonitrile (Buna-H, NBR) is also produced by the emulsion process at an annual rate of about 200 million pounds. Likewise, neoprene is produced by the emulsion polymerization of chloroprene at an annual rate of over 125,000 t. Butyl rubber is produced by the low-temperature cationic copolymerization of isobutylene (90%) and isoprene (10%) at an annual rate of about 150,000 t. Polybutadiene, polyisoprene, and EPDM are produced by the anionic polymerization of about 600,000, 100,000, and 350,000 t, respectively. Many other elastomers are also produced. 

ABA ABS ABS-PC ABS-PVC ACM ACS AES AMMA AN APET APP ASA BR BS CA CAB CAP CN CP CPE CPET CPP CPVC CR CTA DAM DAP DMT ECTFE EEA EMA EMAA EMAC EMPP EnBA EP EPM ESI EVA(C) EVOH FEP HDI HDPE HIPS HMDI IPI LDPE LLDPE MBS Acrylonitrile-butadiene-acrylate Acrylonitrile-butadiene-styrene copolymer Acrylonitrile-butadiene-styrene-polycarbonate alloy Acrylonitrile-butadiene-styrene-poly(vinyl chloride) alloy Acrylic acid ester rubber Acrylonitrile-chlorinated pe-styrene Acrylonitrile-ethylene-propylene-styrene Acrylonitrile-methyl methacrylate Acrylonitrile Amorphous polyethylene terephthalate Atactic polypropylene Acrylic-styrene-acrylonitrile Butadiene rubber Butadiene styrene rubber Cellulose acetate Cellulose acetate-butyrate Cellulose acetate-propionate Cellulose nitrate Cellulose propionate Chlorinated polyethylene Crystalline polyethylene terephthalate Cast polypropylene Chlorinated polyvinyl chloride Chloroprene rubber Cellulose triacetate Diallyl maleate Diallyl phthalate Terephthalic acid, dimethyl ester Ethylene-chlorotrifluoroethylene copolymer Ethylene-ethyl acrylate Ethylene-methyl acrylate Ethylene methacrylic acid Ethylene-methyl acrylate copolymer Elastomer modified polypropylene Ethylene normal butyl acrylate Epoxy resin, also ethylene-propylene Ethylene-propylene rubber Ethylene-styrene copolymers Polyethylene-vinyl acetate Polyethylene-vinyl alcohol copolymers Fluorinated ethylene-propylene copolymers Hexamethylene diisocyanate High-density polyethylene High-impact polystyrene Diisocyanato dicyclohexylmethane Isophorone diisocyanate Low-density polyethylene Linear low-density polyethylene Methacrylate-butadiene-styrene... 

Butadiene is a colorless, odorless, flammable gas, with a boiling point of -4.7°C and is used for the manufacture of polybutadiene, nitrile rubber, chloroprene, and various other polymers. An important synthetic elastomer is styrene-butadiene rubber (SBR) in the automobile tire industry. Specialty elastomers are polychloroprene and nitrile rubber, and an important plastic is acrylonitrile/butadiene/styrene (ABS) terpolymer. Butadiene is made into adiponitrile, which is converted into hexamethylenediamine (HMDA), one of the monomers for nylon. 

Solid-state 13C NMR has been used to identify elastomers in binary blends of chloroprene (CR) and NR, CR and CSM, NR and CSM, and SBR and acrylonitrile-butadiene rubber (NBR). The type of NBR can be determined by identifying the sequences of acrylonitrile and butadiene. The tertiary blend of NR/SBR/BR was also studied [49]. High-temperature 13C solid-state NMR identified ethylene-propylene diene terpolymer (EPDM) and fluoro and nitrile rubbers [50]. 

The elastomeric sealing components of the metering valve are particularly critical. In those valves used with CFC propellants, the elastomeric seals have typically been formed from an acrylonitrile/butadiene rubber, which has been cured with sulfur. These rubber seals may not be fully compatible with HFA propellants hence, alternative elastomeric materials have been used. These materials include peroxide-cured acrylonitrile/ butadiene, ethylene-propylene diene monomer (EPDM), and chloroprene and thermoplastic elastomers (TPE). The elastomeric materials used to form the dynamic seals around the stem and the static gasket seal between the can and valve may differ based on the required properties of the rubber for the specific function of the seal. The most important characteristics of the elastomeric seals... 

Establishments primarily engaged in manufacturing synthetic rubber by polymerization or copolymerization. An elastomer for the purpose of this classification is a rubber-like material capable of vulcanization, such as copolymers of butadiene and styrene, or butadiene and acrylonitrile, polybutadienes, chloroprene rubbers, and isobutylene-isoprene copolymers. Butadiene copolymers containing less than 50 percent butadiene are classified in Industry 2821. Natural chlorinated rubbers and cyclized rubbers are considered as semifinished products and are classified in Industry 3069. 

Table 35-4. Glass Transition Temperatures and Solubility Parameters of Various Vulcanized Elastomers and Their Mixtures. 8, Solubility Parameter Br, Poly (butadiene) CR Poly(chloroprene) NBR, Poly(butadiene-co-acrylonitrile) NR, Natural Rubber ...

One of the basic monomers is gaseous ethylene, which is polymerized to form polyethylene, which is the basis for other monomers such as styrene, acrylonitrile, isobutylene, vinyl alcohol, and vinyl chloride. These monomers in turn can be polymerized to form polystyrene, polyacrylonitrile, polyisobutylene, polyvinyl alcohol, and polyvinyl chloride. Another basic monomer is butadiene from which the monomers isoprene and chloroprene are derived. These two groups of monomers can react to form copolymers such as butadiene-styrene (GR-S), butadiene-acrylonitrile (Buna-N), and isoprene with isobutylene (butyl), which forms the basis of a basic elastomer series. 

Concept Check 15.9 During the winter months, the temperature in some parts of Alaska may go as low as —55°C ( —65°F). Of the elastomers natural isoprene, styrene-butadiene, acrylonitrile-butadiene, chloroprene, and polysiloxane, which would be suitable for automobile tires under these conditions Why ... 

---