Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Verification reports

Clapsaddle, C. and Van Osdell, D. (2000) Environmental Technology Verification Report (ETV) - NO, Control Technologies - Catalytica Combustion System, Inc. XONON Flameless Combustion System, EPA Cooperative Agreement CR826152-01-2. [Pg.388]

Describe the logic behind all pertinent activities that occurred during technology transfer from phase III clinical production to the commercial process (determination of full-scale commercial processes, specifications, lot size, etc.). Discuss problems, failures, and so on. Justify the absence of equivalency concerns despite the differences in process parameters. Reference the report that indicates successful technology transfer (e.g., validation report, verification report). [Pg.480]

In this case, the integrity of each file is verified by comparing the cross-redundancy check (CRC) of the installed file with the checksum of the original file recorded on the installation master. Modified or corrupt files have different checksums and are, thus, detected by the verification program. Verification reports include a list of missing, changed, and identical files. [Pg.457]

NSF International. Physical removal of microbiological and particulate contaminants in drinking water. Environmental Technology Verification Report. No. NSF-04/01/EPAD-WCTR, September, 2004. [Pg.190]

New companies are verified three years after joining CCPA using a comprehensive Responsible Care-in-Place Verification protocol, with subsequent verifications following a more focused protocol. Verification reports are made available to their local communities and other interested parties by the verified company. [Pg.278]

A sufficient number of different individual tests, at least six, concerning type of tests and corresponding validation or verification reports (in certain exceptional cases these could be routine tests, but in such a case a supplemental validation or verification procedure must be carried out) ... [Pg.155]

Transport incidents while the external verification report identifies that Bayer records safety-relevant data covering the whole transportation process , this data is not discussed in the CER and a no score has been given. [Pg.154]

External verification no external verification report is included in the CER. There is a separate heading titled External Council on 1999 Public Report which instead contains two endorsements from consultants used to help shape our thinking . [Pg.192]

The second part of the CER discusses the environmental impact of the various businesses, and the remainder of the report contains site reviews and the verification report. [Pg.272]

External verification a verification report by KPMG is included in the CER. It only relates to clearly marked data within the report. The methodology reviewed documentation, carried out management and staff interviews and scrutinised systems at five sites, and analysed/carried out trail checks on selected data. [Pg.306]

The verification report concluded that particular (marked) data in the CER accurately relates to the reporting group and period, and that other data (also marked) could not be reconciled with supporting evidence. For this latter data footnotes are given. [Pg.306]

T. (1999). International Rules for Greenhouse Gas Emissions Trading Defining the Principles, Modalitites, Rules and Guidelines for Verification, Reporting and Accountability, UNCTAD/GDS/GFSB/Misc.6, United Nations Geneva, Switzerland. [Pg.284]

The overall process of EOP verification and its documentation should be reviewed. The review should focus on the adequacy of the verification guide and its implementation. The verification report should be reviewed. The subject of verification is addressed in Section 3.5. [Pg.56]

The Second Review Conference reaffirmed the importance of factual reporting by the Secretariat to the Council and the States Parties on verification results, in the interests of transparency and continued assurance of States Parties compliance. It encouraged the Secretariat to continue its efforts to improve verification reporting and urged States Parties to avail themselves of this information, as well as availing themselves of their right to receive and examine declaration data from other States Parties, in accordance with the relevant provisions of the ConventioiL... [Pg.517]

Next, all materials are weighed. The computer prints an outweigh verification report that confirms that the order is correct, and this becomes part of the permanent batch record. The first analytical check begins as soon as raw materials are received on the dock. To confirm the material is what it claims to be, a quality control (QC) technician performs nondestructive FTNIR spectroscopy. A special stainless steel probe is inserted into each sample. If the test fails, the material is quarantined and further analyzed in the lab. In addition, the QC technician pnUs samples based on the square root of the number received minus one. For example, in a shipment of nine drnms, the technician puUs four samples. After confirmation of identity, materials are pnt on hold and stored in the warehouse. When quality assurance is satisfied with the results of its test, the material is released for processing. [Pg.616]

A validation plan is needed which cross-references all the functional safety requirements to the various calculations, reviews, and tests which verify the individual features. The completed cross-referencing of the results/reports provides the verification report. A spreadsheet is often effective for this purpose. [Pg.67]

Guidance is provided on what to look for when inspecting membrane installations and underfloor venting as well as what information to include in a verification report. Guidance on post-construction monitoring is also provided. [Pg.175]

Verification report checklist (based on Environment Agency guidance on requirements for land contamination reports (Environment Agency, 2005c)... [Pg.182]

Reference to requirements specification with corresponding safety requirements and argumentations in a verification report. [Pg.44]

Eai,gi Sw architecture design specification, Sw architecture verification report... [Pg.181]

The OCJTF has performed independent DOE verifications of Category I Orders per the "Management Plan - DOE Order Compliance Verification Programs at the Savannah River Site" (Reference 10). WSRC shall develop responses for the noncompliant items identified in the Verification Reports issued at the conclusion of each Order verification. Responses are in the form of a request for a Compliance Schedule Approval (CSA), an exemption or a short-term compliance statement (STCS). All CSAs and exemptions shall be approved or corrective actions approved and completed for all Category I Order noncompliant items prior to K-reactor restart. This remains as an open item. [Pg.69]

December 1997, when the Kyoto Protocol to the UNFCCC was eventually adopted. Article 17 of the Protocol provides that The Conference of the Parties shall define the relevant principles, modahties, rules and guidelines, in particular for verification, reporting and accountability for emissions trading. [Pg.300]


See other pages where Verification reports is mentioned: [Pg.334]    [Pg.127]    [Pg.48]    [Pg.48]    [Pg.290]    [Pg.154]    [Pg.41]    [Pg.42]    [Pg.112]    [Pg.28]    [Pg.31]    [Pg.31]    [Pg.46]    [Pg.520]    [Pg.172]    [Pg.182]    [Pg.181]    [Pg.2164]   
See also in sourсe #XX -- [ Pg.112 ]




SEARCH



Verification

© 2024 chempedia.info