Trade names Derivation

Alcohol commercial name Representative trade name Derived from r 12 r 13 r C-14 C16 r 18 r 20... 

Bakelite lba-k9- llt, - kllt n. (1) A trade name derived from the name of Leo H. Baekeland, a pioneering Belgian chemist who developed phenolic resins in the early 1900s. They are the oldest family of phenolformaldehyde polymers. The trade name was long used by the Bakelite Corporation, later absorbed by Union Carbide, who still uses the name for some of its resins. (2) Phenol-formaldehyde resins, manufactured by Bakelite Inc., USA. 

Trivial or trade namc.s can be stored and searched as character strings. Their use is the simplest and most intuitive way of storing chemical information. However, being not subject to strict rules, their formation does not reflect accurately the molecular composition. Hence, the structure of the searched compound cannot be derived from them. Thus, a name such as "Flexricin does not tell the user very much. Furthermore, many more than one trivial or trade name for a given compound usually exist. 

Emulsion Adhesives. The most widely used emulsion-based adhesive is that based upon poly(vinyl acetate)—poly(vinyl alcohol) copolymers formed by free-radical polymerization in an emulsion system. Poly(vinyl alcohol) is typically formed by hydrolysis of the poly(vinyl acetate). The properties of the emulsion are derived from the polymer employed in the polymerization as weU as from the system used to emulsify the polymer in water. The emulsion is stabilized by a combination of a surfactant plus a coUoid protection system. The protective coUoids are similar to those used paint (qv) to stabilize latex. For poly(vinyl acetate), the protective coUoids are isolated from natural gums and ceUulosic resins (carboxymethylceUulose or hydroxyethjdceUulose). The hydroHzed polymer may also be used. The physical properties of the poly(vinyl acetate) polymer can be modified by changing the co-monomer used in the polymerization. Any material which is free-radically active and participates in an emulsion polymerization can be employed. Plasticizers (qv), tackifiers, viscosity modifiers, solvents (added to coalesce the emulsion particles), fillers, humectants, and other materials are often added to the adhesive to meet specifications for the intended appHcation. Because the presence of foam in the bond line could decrease performance of the adhesion joint, agents that control the amount of air entrapped in an adhesive bond must be added. Biocides are also necessary many of the materials that are used to stabilize poly(vinyl acetate) emulsions are natural products. Poly(vinyl acetate) adhesives known as "white glue" or "carpenter s glue" are available under a number of different trade names. AppHcations are found mosdy in the area of adhesion to paper and wood (see Vinyl polymers). 

Information on the production levels of the perfluoroethers and perfluorotertiary amines is not disclosed, but the products are available commercially and are marketed, for instance, as part of the Fluorinert Electronic Liquids family by 3M Co. (17). These Hquids have boiling points of 30—215°C with molecular weights of about 300—800. They range in price from 26—88/kg. Perfluoropropene oxide polyethers are marketed by Du Pont with the trade name Krytox (29). The linear perfluoropropene oxide polyethers are marketed by Daikin under the trade name Demnum (28). The perfluoropolyethers derived from photooxidation are marketed by Montefluos under the trade name of Fomblin (30). These three classes of polyethers are priced from about 100—150/kg. 

Tetralin. Tetralin is a trade name of Du Pont for 1,2,3,4-tetrahydronapththalene [119-64-2] C qH 2- Tetralin, a derivative of naphthalene, is made by hydrogenating one ring completely and leaving the other unchanged. Tetralin is produced by several manufacturers and is one of the oldest heat-transfer fluids. Tetralin can be used both in Hquid- and vapor-phase systems. The normal boiling point is 207°C. 

Mesitylene. One of the principal derivatives of mesitylene is the stericaHy hindered phenol of the stmcture shown in Eigure 4. Its trade name is Ethanox 330 and it is produced by Albemarle Corporation (formerly Ethyl Corporation) (31). Ethanox 330 is an important noncoloring antioxidant and thermal stabiHzer for plastics, adhesives, mbber, and waxes (qv) (32,33) (see Antioxidants). The oral toxicity of Antioxidant 330 is extremely low (oral LD q in rats >15 g/kg) since its large size, C H gO, effectively eliminates absorption from the gastrointestinal tract. 

Batch syntheses comparable to those used for MDA produce 3,3 -dimethy1methy1enedi(cyclohexylamine) marketed under the trade name Laromia C-260. The starting aromatic diamiae, 3,3 -dimethy1methy1enediani1ine [838-88-0] is prepared from o-toluidine [95-53-4] condensation with formaldehyde. Similarly 3,3 -dimethyldicyclohexylaniiae [24066-10-2] may be produced (38) from o-toHdine [119-93-7] derived from o-nitrotoluene [88-72-2]. The resultant isomer mixtures are dependent on reduction conditions as ia MDA hydrogeaatioa. 

A monograph (1) covers the pioneering period of sulfa dmg development and describes over 5000 sulfanilamide derivatives, their preparation, properties, trade names, and biological testing. This review is remarkably complete through 1944. Several thousand additional derivatives have been made since, but no comparable coverage is available. A definitive account of medical appHcations up to 1960 has been pubHshed (2), and a review of experimental antibacterial aspects has been made (3). Chapters on general aspects of sulfonamides and sulfones have appeared (4,5). A review of the clinical efficacy of trimethoprim—sulfamethoxazole has been pubHshed (6). 

Rifampicin, the only commercially available ansamacroHde, is manufactured by MerreU Dow under the tradename Rifadin, and by CIBA under the trade name Rimactane. Rifampicin is also suppHed in combination with isoniazid or pyrazinamide [98-96-4]. The rifampicin—isoniazid combination is known as Rifamate (MerreU Dow), Rifinah (MerreU Dow), and Rimactazid (CIBA) the rifampicin—pyrazinamide as Rifater (MerreU Dow). Several other rifamycin derivatives including rifabutin and rifapentine are undergoing clinical studies. 

Carboxjiates with a fiuorinated alkyl chain ate marketed by the 3M/Industrial Chemical Products Company under the trade name Fluotad surfactants. They also include other functional derivatives of fiuorinated and perfluorinated alkyl chains. Replacement of hydrogens on the hydrophobe by fluorine atoms leads to surfactant molecules of unusually low surface tension. This property imparts excellent leveling effectiveness. 

Polyether Polyols. Polyether polyols are addition products derived from cyclic ethers (Table 4). The alkylene oxide polymerisation is usually initiated by alkah hydroxides, especially potassium hydroxide. In the base-catalysed polymerisation of propylene oxide, some rearrangement occurs to give aHyl alcohol. Further reaction of aHyl alcohol with propylene oxide produces a monofunctional alcohol. Therefore, polyether polyols derived from propylene oxide are not truly diftmctional. By using sine hexacyano cobaltate as catalyst, a more diftmctional polyol is obtained (20). Olin has introduced the diftmctional polyether polyols under the trade name POLY-L. Trichlorobutylene oxide-derived polyether polyols are useful as reactive fire retardants. Poly(tetramethylene glycol) (PTMG) is produced in the acid-catalysed homopolymerisation of tetrahydrofuran. Copolymers derived from tetrahydrofuran and ethylene oxide are also produced. 

In the United States, the manufacturers of fermentation-derived tetracyclines (1), (2), and (3) are the Ledede Laboratories, a division of American Cyanamid Co., Charles Pfizer Inc., Bristol Laboratories, and RacheUe Laboratories. There are also several manufacturers abroad. Tetracycline is now sold genetically by many companies. Pfizer s doxycycline (6) and Ledede s minocycline (7), both semisynthetic tetracyclines, are the only members of the group that have increasing sales. Table 1 fists the commercial tetracyclines and the corresponding trade names. 

Carmine [1390-65-4] is the trade name for the aluminum lake of the red anthraquinone dye carminic acid obtained from the cochineal bug. The dye is obtained from the powdery form of cochineal by extraction with hot water, the extracts treated with aluminum salts, and the dye precipitated from the solution by the addition of ethanol. This water-soluble bright red dye is used for coloring shrimp, pork sausages, pharmaceuticals, and cosmetics. It is the only animal-derived dye approved as a colorant for foods and other products. 

In the early 1950s novel polyethers were prepared in the laboratories of the Hercules Powder Company and of Imperial Chemical Industries Limited from oxacyclobutane derivatives. One such polyether that from 3,3-dichloromethyl-1-oxacyclobutane, was marketed by the first named company in 1959 under the trade name of Penton. Commercial manufacture of this material had, however, ceased by the end of 1972. 

The generic name of a drug is not directly derived from systematic nomenclature. Furthermore, different pharmaceutical companies will call the same drug by their own trade name, which is different from its generic name. Generic names are invented on request (for a fee) by the U.S. Adopted Names Council, a private organization founded by the American Medical Association, the American Pharmaceutical Association, and the U.S. Pharma-copeial Convention. 

The above trade names are for phosphate and pamoate derivatives)... 

In refrigerating systems, halogen derivatives of methane and ethane marketed under the trade names of Arctons and Freons are without action on pure aluminium and its copper-free alloys in dry conditions, but in wet conditions monochlorodi-, dichloromono-and trichloromonofluoromethanes can hydrolyse to produce slight attack on the aluminium. 

Another reagent that readily forms fluorescent derivatives with primary amines is o-phthalaldehyde (trade name "Fluoropa"). The reaction proceeds in aqueous solution in the presence of a mercaptan at a pH of 9-11 producing an isoindole. 

Figure 9 Synthesis of a lutetium(III) texaphyrin derivative illustrated by the synthesis of (32) (trade name...

Most of the polymers are better known by their trivial names or trade names. Polymers prepared from single polymers are denoted by prefixing poly- to the name of the monomer, e.g., polyethylene, polypropylene, Polyacrylonitrile, polystyrene, etc. If the monomer has substituents or has a multi-worded name, the name of the monomer is enclosed in parenthesis after the prefix poly-, e.g., poly (methyl methacrylate), poly (vinyl alcohol), etc. Condensation polymers like that derived from ethylene glycol and terephthalic acid are named as poly (ethylene terephthalate). 

Aspartame, N-a-L-aspartyl-L-phenylalanine methyl ester, trade names NutraSweet , and Aspartil , is a dipeptide derivative. Like dipeptides aspartame is metabolised into the constituents, i.e. amino acids and methanol. Therefore studies into the metabolic behaviour and the fate of metabolites were carried out. Levels of blood aspartate and glutamate were measured after intake of high aspartame doses. Changes were transient and allegations of influences of high aspartame levels on brain function could never be verified. 

FIGURE 1.2 Structure and stereochemistry of commercially available cinchona alkaloid CSPs, marketed under trade name CHIRALPAK by chiral technologies europe. QN denotes quinine- and QD quinidine-derived and AX refers to their anion-exchanger capabilities vide infra). 

---