Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Test construction

RCT are designed to successfully solve a whole number of tasks in nuclear power when testing fuel elements, in aviation and space industry when testing construction materials, nozzles and engine units, turbine blades and parts, in electromechanical industry-cables switching elements, electric motors in defense sphere- charges, equipment in prospecting for research of rock distribution and detection of precious stones in samples. [Pg.598]

Before the designation, the laboratories developed their laboratory methods for testing, constructed and made operational their laboratory quality system and obtained its accreditation, and continued the participation and successful performance in the OPCW proficiency tests (PT). Analytical methods in particular and a certain level of quality assurance systems have existed in the laboratories, involved often in research, well before their designation. Participation in the international interlaboratory... [Pg.151]

Therefore, as the above paragraphs suggest, schema-based assessment requires a reconsideration of the basic principles behind test construction and use. The issues just mentioned outline some of the differences between schema-based tests and traditional tests. The remainder of this chapter examines some of the major implications of schema theory for test development and test interpretation. Some of the implications are far-reaching and must await new methodologies. Others are candidates for immediate implementation. [Pg.271]

Test construction and item generation under schema theory require new approaches. It is worth considering how test items can be constructed to reflect the linkages expected in students knowledge of a subject. The nature of the linkages points to two possible representations a hierarchy and a network. [Pg.275]

The Turkheimer study discussed in chapter 10 pointed out that correlations between heredity or environment and IQ are dependent on socioeconomic class, with environment contributing nearly all the variance for the lower socioeconomic class.81 The study shows us that the contributions of heredity and environment to variance of IQ scores depend on the socioeconomic class of the population tested. The Flynn effect shows us that distributions of IQ scores are artifacts of test construction and depend on the generation tested. Both effects are of great importance for social policy. [Pg.293]

There are 19 text fields available for searching, e.g. compound name, synonym name, authors names, journal volume and page numbers , etc. The general test construct... [Pg.85]

Although the test forms the basis of foraminiferal classification, and is the only structure to survive fossilization, the cell body is equally remarkable and important. It gives rise to the complex, highly mobile, and pervasive network of granuloreticulose pseudopodia. These versatile organelles perform a variety of functions (locomotion, food gathering, test construction, and respiration) that are probably fundamental to the ecological success of foraminifera in marine environments. [Pg.390]

The physicist Ernst Hochheim joined BASF in 1911 as a member of Carl Bosch s staff In his early years he was responsible for testing construction materials, and general physical questions. He also managed the contacts of LG. Farben with academic physicists. His group introduced x-ray equipment earlier than did the Ludwigshafen Central Laboratory and investigated on a small scale the scientific principles of the catalytic ammonia reaction. ... [Pg.83]

Tensile testing of single crystalline metallic microwhiskers can also be studied following the experimental tensile testing constructed by Brenner and (b) results of whisker fracture strength as a function of whisker size, showed the clear size dependence (Fig. 3.34). The chitin whiskers are usually incorporated into polymer matrix to prepare CWs reinforced polymer nanocomposite. Thus, the mechanical... [Pg.97]

Tested construction Apparatus Criteria Fire spreading degrees ... [Pg.205]

For Landfill Class I (disposal of mineral or mineralised wastes with low contamination) and for conventional landfills for demolition waste, excavated soil etc. only a compacted clay liner is required. The system components for class I and II cappings, being the most common types nowadays installed in Germany, are listed in Table 9.1. Guidelines with strict requirements for materials selection and testing, construction technique and quality control were published for the standard systems (Muller 1996 Muller 2001 N.N. 1993). [Pg.334]

Figure 3W3.4 is a sketched plot of the height-time curve for this test constructed from the information above. The shape of the curved portion of the curve can again be... [Pg.75]

The contractor (via the testing contractor) assembles documentation conducts training and coordinates, schedules, and performs commissioning testing. Construction corrections and delays are the contractor s responsibility. But the commissioning authority is there to verify the results of tests and help identify solutions, as needed. [Pg.51]

Papadopoulos, M.P., Apostolopoulos, C.A., Zervaki, A.D. Haidemenopoulos, G.N. 2011 Corrosion of exposed rebars, associated mechanical degradation and correlation with accelerated corrosion tests. Construction and Building Materials, 25, 3367-3374. [Pg.2191]

Use known and tested construction contractors who will attain quality goals with minimal supervision on the part of the EPCM contractor. [Pg.34]

Prepare a standard copper sulphate solution to contain 100 fig of Cu per ml by dissolving 0 3926 g CuS04,5H20 in 2N sulphuric acid, diluted to 1 litre. For use, dilute this solution with 2N sulphuric acid to contain 2 (JLg per ml. Transfer separate 0,1, 2 5, 5, 10,15, 20, and 25 ml portions of this solution made up to 25 ml with 2N sulphuric acid to separators, add 2 g of citric acid and 0 5 g of the disodium salt of EDTA to each and extract with carbon tetrachloride as in the test. Construct a graph relating extinction values to micrograms of copper. [Pg.199]

D-3498. Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems. Tests construction assembly adhesives for minimum shear strength and permanence (including oxygen bomb aging). [Pg.98]


See other pages where Test construction is mentioned: [Pg.249]    [Pg.356]    [Pg.3]    [Pg.2145]    [Pg.39]    [Pg.281]    [Pg.32]    [Pg.114]    [Pg.92]    [Pg.97]    [Pg.171]    [Pg.528]    [Pg.59]    [Pg.45]    [Pg.518]    [Pg.59]    [Pg.80]   


SEARCH



© 2024 chempedia.info