Styrene physical properties

Physical Properties. Styrene, CgH CH = CHj, is a pleasant smelling liquid, lighter than and insoluble in water, b.p. 146°. Stilbene, CjHjCH = CHCqHj, is a colourless solid, m.p. 125°, b.p. 306°, insoluble in water. 

Styrene-Acrylonitrile (SAN) Copolymers. SAN resins are random, amorphous copolymers whose properties vary with molecular weight and copolymer composition. An increase in molecular weight or in acrylonitrile content generally enhances the physical properties of the copolymer but at some loss in ease of processing and with a slight increase in polymer color. 

Analytical investigations may be undertaken to identify the presence of an ABS polymer, characterize the polymer, or identify nonpolymeric ingredients. Fourier transform infrared (ftir) spectroscopy is the method of choice to identify the presence of an ABS polymer and determine the acrylonitrile—butadiene—styrene ratio of the composite polymer (89,90). Confirmation of the presence of mbber domains is achieved by electron microscopy. Comparison with available physical property data serves to increase confidence in the identification or indicate the presence of unexpected stmctural features. Identification of ABS via pyrolysis gas chromatography (91) and dsc ((92) has also been reported. 

There has been a marked trend toward concentration of higher styrene (ca 40%) polymers in hot latices, and lower styrene (mostiy 20—30% bound styrene) types in cold latex series. This is a reflection of the fact that lowering the polymerization temperature of high styrene copolymers produces little or no gain in the physical properties of the copolymer. 

Styrene is a colorless Hquid with an aromatic odor. Important physical properties of styrene are shown in Table 1 (1). Styrene is infinitely soluble in acetone, carbon tetrachloride, benzene, ether, / -heptane, and ethanol. Nearly all of the commercial styrene is consumed in polymerization and copolymerization processes. Common methods in plastics technology such as mass, suspension, solution, and emulsion polymerization can be used to manufacture polystyrene and styrene copolymers with different physical characteristics, but processes relating to the first two methods account for most of the styrene polymers currendy (ca 1996) being manufactured (2—8). Polymerization generally takes place by free-radical reactions initiated thermally or catalyticaHy. Polymerization occurs slowly even at ambient temperatures. It can be retarded by inhibitors. 

OC-Methylstyrene. This compound is not a styrenic monomer in the strict sense. The methyl substitution on the side chain, rather than the aromatic ring, moderates its reactivity in polymerization. It is used as a specialty monomer in ABS resins, coatings, polyester resins, and hot-melt adhesives. As a copolymer in ABS and polystyrene, it increases the heat-distortion resistance of the product. In coatings and resins, it moderates reaction rates and improves clarity. Physical properties of a-methylstyrene [98-83-9] are shown in Table 12. 

Vinyl acetate is a colorless, flammable Hquid having an initially pleasant odor which quickly becomes sharp and irritating. Table 1 Hsts the physical properties of the monomer. Information on properties, safety, and handling of vinyl acetate has been pubUshed (5—9). The vapor pressure, heat of vaporization, vapor heat capacity, Hquid heat capacity, Hquid density, vapor viscosity, Hquid viscosity, surface tension, vapor thermal conductivity, and Hquid thermal conductivity profile over temperature ranges have also been pubHshed (10). Table 2 (11) Hsts the solubiHty information for vinyl acetate. Unlike monomers such as styrene, vinyl acetate has a significant level of solubiHty in water which contributes to unique polymerization behavior. Vinyl acetate forms azeotropic mixtures (Table 3) (12). 

Modified Bitumen Membranes. These membranes were developed in Europe during the late 1950s and have been used in the United States since the late 1970s. There are two basic types of modified asphalts and two types of reinforcement used in the membranes. The two polymeric modifiers used are atactic polypropylene (APP) and styrene—butadiene—styrene (SBS). APP is a thermoplastic polymer, whereas SBS is an elastomer (see Elastomers, thermoplastic elastomers). These modified asphalts have very different physical properties that affect the reinforcements used. 

Styrene—butadiene—styrene modified bitumen is an elastomeric material mixed into an asphalt between 10 and 15%. By using high energy mixing, the SBS is uniformly dispersed throughout the asphalt to form a network, referred to as phase reversal because the minor component s (SBS) physical properties are displayed by the final mixture. A properly formulated SBS asphalt blend has an elongation of 100% or greater and is flexible down to temperatures below —6°C. 

The important features of rigidity and transparency make the material competitive with polystyrene, cellulose acetate and poly(methyl methacrylate) for a number of applications. In general the copolymer is cheaper than poly(methyl methacrylate) and cellulose acetate, tougher than poly(methyl methacrylate) and polystyrene and superior in chemical and most physical properties to polystyrene and cellulose acetate. It does not have such a high transparency or such food weathering properties as poly(methyl methacrylate). As a result of these considerations the styrene-acrylonitrile copolymers have found applications for dials, knobs and covers for domestic appliances, electrical equipment and car equipment, for picnic ware and housewares, and a number of other industrial and domestic applications with requirements somewhat more stringent than can be met by polystyrene. 

Other commercially relevant monomers have also been modeled in this study, including acrylates, styrene, and vinyl chloride.55 Symmetrical a,dienes substituted with the appropriate pendant functional group are polymerized via ADMET and utilized to model ethylene-styrene, ethylene-vinyl chloride, and ethylene-methyl acrylate copolymers. Since these models have perfect microstructure repeat units, they are a useful tool to study the effects of the functionality on the physical properties of these industrially important materials. The polymers produced have molecular weights in the range of 20,000-60,000, well within the range necessary to possess similar properties to commercial high-molecular-weight material. 

The situation is confused, however, by the case of certain chemicals. Styrene, for example, was known from the mid-nineteenth century as a clear organic liquid of characteristic pungent odour. It was also known to convert itself under certain circumstances into a clear resinous solid that was almost odour-free, this resin then being called metastyrene. The formation of metastyrene from styrene was described as a polymerisation and metastyrene was held to be a polymer of styrene. However, these terms applied only in the sense that there was no change in empirical formula despite the very profound alteration in chemical and physical properties. There was no understanding of the cause of this change and certainly the chemists of the time had no idea of what had happened to the styrene that was remotely akin to the modem view of polymerisation. 

Star polymers are a class of polymers with interesting rheological and physical properties. The tetra-functionalized adamantane cores (adamantyls) have been employed as initiators in the atom transfer radical polymerization (ATRP) method applied to styrene and various acrylate monomers (see Fig. 21). 

PHYSICAL PROPERTIES OF AMBERLITE XAO RESINS STY-DVB styrene-divinylbenzene copolyaier... 

The physical properties of the acid- and ion-containing polymers are quite interesting. The storage moduli vs. temperature behavior (Figure 8) was determined by dynamic mechanical thermal analysis (DMTA) for the PS-PIBMA diblock precursor, the polystyrene diblock ionomer and the poly(styrene)-b-poly(isobutyl methacrylate-co-methacrylic acid) diblock. The last two samples were obtained by the KC>2 hydrolysis approach. It is important to note that these three curves are offset for clarity, i.e. the modulus of the precursor is not necessarily higher than the ionomer. In particular, one should note the same Tg of the polystyrene block before and after ionomer formation, and the extension of the rubbery plateau past 200°C. In contrast, flow occurred in... 

The physical properties of polystyrene depend upon the specific reaction components, the mass ratios of the components, and the conditions at which the reaction occurs. These will be discussed later. The impurities remaining in the polystyrene also affect the properties. For instance, the heat distortion temperature may be as low as 70°C if there is unreacted styrene present. It is normally between 90 and 95°C. Therefore the maximum percentage of styrene that will be allowed in the product is 0.01%. Careful drying is also necessary if the polystyrene is to be extruded. For this application the polystyrene must contain a maximum of 0.03-0.05% water. We will set 0.03% as the maximum amount of water allowed. The specifications for the polystyrene are given in Table 3E-1. Different types of rubbers may be used for making impact polystyrenes.12 We shall use polybutadiene. 

Hivalloy A process for grafting styrenic polymers on to polyolefines, using a Ziegler-Natta catalyst. The products combine the physical properties of both polymer types. Developed by Montell and commercialized in the United States in 1997. See also Catalloy. Oxley, D. F., Chem. Ind. (London), 1998, (8), 307. 

Dibromo/tribromo styrene monomers, homopolymers of, 11 470 Dibutylamine, 2 550t Dibutylcadmium, physical properties of, 4 517t... 

---