Vaporization heat of

Zwolinski, B. J., and R. C. Wilhoit "Vapor Pressures and Heats of Vaporization of Hydrocarbons and Related Compounds," Thermodynamic Research Center, Dept, of Chemistry, Texas A M University, College Station, Texas, 1971. 

Enthalpies are referred to the ideal vapor. The enthalpy of the real vapor is found from zero-pressure heat capacities and from the virial equation of state for non-associated species or, for vapors containing highly dimerized vapors (e.g. organic acids), from the chemical theory of vapor imperfections, as discussed in Chapter 3. For pure components, liquid-phase enthalpies (relative to the ideal vapor) are found from differentiation of the zero-pressure standard-state fugacities these, in turn, are determined from vapor-pressure data, from vapor-phase corrections and liquid-phase densities. If good experimental data are used to determine the standard-state fugacity, the derivative gives enthalpies of liquids to nearly the same precision as that obtained with calorimetric data, and provides reliable heats of vaporization. 

Latent heat of vaporization decreases i.e., reboiler and condenser duties become lower. 

Example 9.1 A process involves the use of benzene as a liquid under pressure. The temperature can be varied over a range. Compare the fire and explosion hazards of operating with a liquid process inventory of 1000 kmol at 100 and 150°C based on the theoretical combustion energy resulting from catastrophic failure of the equipment. The normal boiling point of benzene is 80°C, the latent heat of vaporization is 31,000 kJ kmol the specific heat capacity is 150 kJkmoh °C , and the heat of combustion is 3.2 x 10 kJkmok. ... 

Solution The fraction of liquid vaporized on release is calculated from a heat balance. The sensible heat above saturated conditions at atmospheric pressure provides the heat of vaporization. The sensible heat of the superheat is given by... 

To calculate the heat of vaporization, the Lee and Kesler method in article 4.3.1.3 is used. 

Triple point temperature K Heat of fusion kJ/lc Heat of vaporization kJ/kg Liquid conductivity atr, W / (m-K) Liquid conductivity AtT W/(m-I0 Temperature Ti K Temperature h K... 

Triple point temperature Heat of fusion Heat of vaporization Liquid conductivity at r, Liquid conductivity at Temperature Tx Temperature Tz... 

Derive an equation for the heat of vaporization of a liquid as a function of drop radius r. 

On compression, a gaseous phase may condense to a liquid-expanded, L phase via a first-order transition. This transition is difficult to study experimentally because of the small film pressures involved and the need to avoid any impurities [76,193]. There is ample evidence that the transition is clearly first-order there are discontinuities in v-a plots, a latent heat of vaporization associated with the transition and two coexisting phases can be seen. Also, fluctuations in the surface potential [194] in the two phase region indicate two-phase coexistence. The general situation is reminiscent of three-dimensional vapor-liquid condensation and can be treated by the two-dimensional van der Waals equation (Eq. Ill-104) [195] or statistical mechanical models [191]. 

We have two interaction potential energies between uncharged molecules that vary with distance to the minus sixth power as found in the Lennard-Jones potential. Thus far, none of these interactions accounts for the general attraction between atoms and molecules that are neither charged nor possess a dipole moment. After all, CO and Nj are similarly sized, and have roughly comparable heats of vaporization and hence molecular attraction, although only the former has a dipole moment. 

The nitrogen adsorption isotherm is determined for a finely divided, nonporous solid. It is found that at = 0.5, P/P is 0.05 at 77 K, gnd P/F is 0.2 at 90 K. Calculate the isosteric heat of adsorption, and AS and AC for adsorption at 77 K. Write the statement of the process to which your calculated quantities correspond. Explain whether the state of the adsorbed N2 appears to be more nearly gaslike or liquidlike. The normal boiling point of N2 is 77 K, and its heat of vaporization is 1.35 kcal/mol. 

Wadsd I 1968 Heats of vaporization of organic compounds II. Chlorides, bromides and iodides Acta Chem. Scand. 22 2438... 

The accurate determination of relative retention volumes and Kovats indices is of great utility to the analyst, for besides being tools of identification, they can also be related to thermodynamic properties of solutions (measurements of vapor pressure and heats of vaporization on nonpolar columns) and activity coefficients on polar columns by simple relationships (179). 

Equation (3.7) gives a simple procedure for evaluating the entropy change accompanying a change of state. At the normal boiling point of a liquid, for example, the heat is absorbed reversibly and equals the heat of vaporization AH,. Since T is constant, the entropy of vaporization is AH,/T. For benzene, for example, AS, = (30.8 k J mol" )/353 = 87 J K mol. ... 

In estimating the enthalpy of polymerization, the physical state of both starting monomer and polymer must be specified. Changes in state are accompanied by ethalpy changes. Therefore, they also affect the level of the polymerization enthalpy. The AfT forN ylylene previously mentioned is apphcable to the monomer as an ideal gas. To make comparisons with other polymerization processes, most of which start with condensed monomer, a heat of vaporization for N ylylene is needed. It is assumed herein that it is the same as that for N ylene, 42.4 kJ /mol (10.1 kcal/mol). Thus the AfT of the hquid monomer -xylylene is 192.3 kJ/mol (46.0 kcal /mol). 

The most common hydrophobic adsorbents are activated carbon and siUcahte. The latter is of particular interest since the affinity for water is very low indeed the heat of adsorption is even smaller than the latent heat of vaporization (3). It seems clear that the channel stmcture of siUcahte must inhibit the hydrogen bonding between occluded water molecules, thus enhancing the hydrophobic nature of the adsorbent. As a result, siUcahte has some potential as a selective adsorbent for the separation of alcohols and other organics from dilute aqueous solutions (4). 

---