Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Shot

Cold shot or hot shot. Injection of cold fresh feed for exothermic reactions or preheated feed for endothermic reactions to inter-... [Pg.325]

If the inspection equipment can be run under stable and reproducable conditions due to the QAP the basis for using a camera system for flaw detection is given.The camera system consists of CCD-cameras and a pattern recognition software. Up to four CCD-cameras can be served by one PC. One shot of the part may be copied up to 16 times in the computer and this theoretically enables the crack determination with 16 different parameter sets. [Pg.630]

A single echographic "shot" at frequency oj and incidence n gives rise to a point K = -2kn( (with k = co/cq) in the spatial frequency space. [Pg.745]

A broad-band (standard) echographic shot in direction n gives a slice of amplitude ... [Pg.745]

This method of displaying the data makes it most comfortable for the tester to evaluate large numbers of single measurements ( shots ) at a glance. [Pg.752]

For ultrasonic imaging systems (B-, C- and C-scans) single-shot measurements, fast data recordings, and fast data transfer must be performed. [Pg.856]

The sample frequency of the ADC (analogue to digital converter) should be 8 times higher than the test frequency (centre frequency of the spectrum). In dependence of the application, different ADC- boards are used. A standard board (20520) provides 8 bit resolution and up to 100 Msamples/s in single shot mode. For manual tests, up to 400 Msamples/s can be reached in the repetition mode. For scanning systems with high frequencies boards up to 400 Msamples/s (single shot) are available. [Pg.858]

The ADC boards used for the PC systems provide a resolution of 8 bit with single-shot sampling of up to 400 Msamples/s. [Pg.861]

The HILL-SCAN 3020LOG with a logarithmic amplifier provides A-seans with a single-shot dynamic range of 100 dB. [Pg.861]

In practice, the NEP of a room-temperature THz spectrometer is usually limited by fluctuations (shot-noise) in the ambient blackbody radiation. Usmg an optical bandwidth Av = 3 THz (limited by, for example, a polyethylene/diamond dust window), a field of view (at nomial incidence) 0 = 9 and a detecting diameter (using a so-called Winston cone, which condenses the incident radiation onto the detecting element) laboratory applications, the background-limited NEP of a bolometer is given by... [Pg.1234]

Kane D J and Trebino R 1993 Single-shot measurement of the intensity and phase of an arbitrary ultrashort pulse by using frequency-resolved optical gating Opt. Lett. 18 823-5... [Pg.1994]

An iron saucepan with a layer of sand at the bottom is quite satisfactory the distilling flask is immersed in the bath to within 2 cm. of the side arm, and two asbestos boards, cut to fit the neck of the flask, rest on top of the bath (as in Fig. II, 5, 3).. Somewhat better rosiilts are obtained if the bath is filled with nickel shot. [Pg.341]


See other pages where Shot is mentioned: [Pg.42]    [Pg.55]    [Pg.55]    [Pg.56]    [Pg.57]    [Pg.326]    [Pg.329]    [Pg.20]    [Pg.20]    [Pg.501]    [Pg.697]    [Pg.745]    [Pg.757]    [Pg.897]    [Pg.1046]    [Pg.1063]    [Pg.1215]    [Pg.1235]    [Pg.1247]    [Pg.1656]    [Pg.2390]    [Pg.2953]    [Pg.523]    [Pg.612]    [Pg.319]    [Pg.324]    [Pg.326]    [Pg.60]    [Pg.607]    [Pg.95]    [Pg.168]    [Pg.234]    [Pg.28]    [Pg.34]    [Pg.39]   
See also in sourсe #XX -- [ Pg.104 ]

See also in sourсe #XX -- [ Pg.281 ]




SEARCH



Aluminum shot

Angle shot mortar

Angle shot mortar test

Big Shot

Bismuth shot

Booster shot

Calcined shot coke

Centrifugal shot casting atomization

Chilled shot

Cold-shot

Cold-shot cooling

Double-shot

Effect of Monol Content on One-Shot Elastomer Processability and Properties

Effect of Primary Hydroxyl Concentration on One-Shot Elastomer Processability

European shot hole borer

Extreme long shots

FLASH, Fast low Angle Shot

Fast Low Angle Shot imaging

Fast low angle shot

First-shot phenomenon

Flu shots

Fore shots

Half-Fourier single-shot turbo spin echo

Hard shot

Injection molding cold shot

Injection molding machine shot

Injection molding short shots

Injection molding two-shot

Injection moulding shot size

Injection shot volume

Insights into Interstage and Cold-Shot Cooling Operation

Laser shots

Laundry One-Shot Liquid

Lead shot and bullets

Lead shot, 231 table

Lead-shot metal

Long shots

Machine shot capacity

Mike shot

Mold filling short shots

Molding double-shot

Multi-shot

Multi-shot techniques

Multiple Adiabatic Tubular Reactors with Cold-Shot Cooling

Multiple shots

Noise, photon shot

Non-Toxic Shot in Todays Market

Number of shots

One shot molding

One shot technique

One-Shot Injection Molding

One-Shot System

One-shot

One-shot application

One-shot device

One-shot elastomer

One-shot formation

One-shot process

One-shot synthesis

Optical fiber single shot

PU-PMMA SINs made by one-shot

Photomultiplier Shot noise

Plated shot

Polyester foams one-shot

Polyether foams one-shot

Projectiles shot loads

Reactor temperature cold shot

SHOT GROWTH

SHOT SIZE

SMART Shot

SSFSE, Single Shot Fast Spin Echo

Screen Shot (Macintosh)

Screen Shot (Windows)

Screen shot, making

Seismic shots

Sensor single-shot

Short shot

Shot Gun Cloning

Shot Noise in the Ion Beam

Shot anchor

Shot blasting

Shot blasting room

Shot capacity

Shot casting

Shot coke

Shot cups

Shot effect

Shot loads

Shot molding

Shot molecular

Shot noise limit

Shot peening

Shot peening applications

Shot proteomics

Shot pump

Shot reactions

Shot size capacity

Shot tower

Shot volume

Shot weight

Shot, grading

Shot, lead

Shot, piles

Shot-blast

Shot-noise

Shots basics

Shots reversal

Shots sequence

Shots, wellbore

Single shot experiments

Single shot images

Single-shot methods

Single-shot pistols

Single-shot technique

Soft shot

Steel shot

Streak Camera Record from Wedge Shot

Total shot volume

Two-shot MID

Two-shot formation

Two-shot molding

Two-shot molding process

© 2024 chempedia.info