Sharpless oxidation allylic alcohols

Semen, reactive oxygen species, 612 Sensorial quaUty appreciation, oxidation stabihty, 664 Semm protein oxidative damage, 614 see also Human seram Sesquiterpenes, stractural chemistry, 133-6 SET see Single electron transfer Sharpless epoxidation, allylic alcohols, 789 Shelf durability, peroxide value, 656 Ship-in-the-bottle strategy, chiral dioxetane synthesis, 1176-7... 

The large-scale production of esomeprazole is now successfully achieved by asymmetric oxidation of the same sulfide intermediate as is used in the production of omeprazole (Scheme 2.5). Using the titanium-based catalyst originally developed by K. Barry Sharpless for allyl alcohol oxidation [56] and by H.B. Kagan for certain sulfide oxidations [57], a process was developed that could achieve initial enantiomeric excesses of about 94% [53]. During the production process, the optical purity is further enhanced by the preparation of esomeprazole magnesium salt, with subsequent re-crystallization. 

The first practical method for asymmetric epoxidation of primary and secondary allylic alcohols was developed by K.B. Sharpless in 1980 (T. Katsuki, 1980 K.B. Sharpless, 1983 A, B, 1986 see also D. Hoppe, 1982). Tartaric esters, e.g., DET and DIPT" ( = diethyl and diisopropyl ( + )- or (— )-tartrates), are applied as chiral auxiliaries, titanium tetrakis(2-pro-panolate) as a catalyst and tert-butyl hydroperoxide (= TBHP, Bu OOH) as the oxidant. If the reaction mixture is kept absolutely dry, catalytic amounts of the dialkyl tartrate-titanium(IV) complex are suflicient, which largely facilitates work-up procedures (Y. Gao, 1987). Depending on the tartrate enantiomer used, either one of the 2,3-epoxy alcohols may be obtained with high enantioselectivity. The titanium probably binds to the diol grouping of one tartrate molecule and to the hydroxy groups of the bulky hydroperoxide and of the allylic alcohol... 

A catalytic enantio- and diastereoselective dihydroxylation procedure without the assistance of a directing functional group (like the allylic alcohol group in the Sharpless epox-idation) has also been developed by K.B. Sharpless (E.N. Jacobsen, 1988 H.-L. Kwong, 1990 B.M. Kim, 1990 H. Waldmann, 1992). It uses osmium tetroxide as a catalytic oxidant (as little as 20 ppm to date) and two readily available cinchona alkaloid diastereomeis, namely the 4-chlorobenzoate esters or bulky aryl ethers of dihydroquinine and dihydroquinidine (cf. p. 290% as stereosteering reagents (structures of the Os complexes see R.M. Pearlstein, 1990). The transformation lacks the high asymmetric inductions of the Sharpless epoxidation, but it is broadly applicable and insensitive to air and water. Further improvements are to be expected. 

The Sharpless-Katsuki asymmetric epoxidation reaction (most commonly referred by the discovering scientists as the AE reaction) is an efficient and highly selective method for the preparation of a wide variety of chiral epoxy alcohols. The AE reaction is comprised of four key components the substrate allylic alcohol, the titanium isopropoxide precatalyst, the chiral ligand diethyl tartrate, and the terminal oxidant tert-butyl hydroperoxide. The reaction protocol is straightforward and does not require any special handling techniques. The only requirement is that the reacting olefin contains an allylic alcohol. 

Sharpless and Masumune have applied the AE reaction on chiral allylic alcohols to prepare all 8 of the L-hexoses. ° AE reaction on allylic alcohol 52 provides the epoxy alcohol 53 in 92% yield and in >95% ee. Base catalyze Payne rearrangement followed by ring opening with phenyl thiolate provides diol 54. Protection of the diol is followed by oxidation of the sulfide to the sulfoxide via m-CPBA, Pummerer rearrangement to give the gm-acetoxy sulfide intermediate and finally reduction using Dibal to yield the desired aldehyde 56. Homer-Emmons olefination followed by reduction sets up the second substrate for the AE reaction. The AE reaction on optically active 57 is reagent... 

The asymmetric epoxidation of an allylic alcohol 1 to yield a 2,3-epoxy alcohol 2 with high enantiomeric excess, has been developed by Sharpless and Katsuki. This enantioselective reaction is carried out in the presence of tetraisopropoxyti-tanium and an enantiomerically pure dialkyl tartrate—e.g. (-1-)- or (-)-diethyl tartrate (DET)—using tcrt-butyl hydroperoxide as the oxidizing agent. 

The Sharpless-Katsuki asymmetric epoxidation (AE) procedure for the enantiose-lective formation of epoxides from allylic alcohols is a milestone in asymmetric catalysis [9]. This classical asymmetric transformation uses TBHP as the terminal oxidant, and the reaction has been widely used in various synthetic applications. There are several excellent reviews covering the scope and utility of the AE reaction... 

The past thirty years have witnessed great advances in the selective synthesis of epoxides, and numerous regio-, chemo-, enantio-, and diastereoselective methods have been developed. Discovered in 1980, the Katsuki-Sharpless catalytic asymmetric epoxidation of allylic alcohols, in which a catalyst for the first time demonstrated both high selectivity and substrate promiscuity, was the first practical entry into the world of chiral 2,3-epoxy alcohols [10, 11]. Asymmetric catalysis of the epoxidation of unfunctionalized olefins through the use of Jacobsen s chiral [(sale-i i) Mi iln] [12] or Shi s chiral ketones [13] as oxidants is also well established. Catalytic asymmetric epoxidations have been comprehensively reviewed [14, 15]. 

Finally, the necessity arose for the synthesis of pentulose 21, labeled with, 3C on the central carbons, C-2 and C-3, for an independent biosynthetic study, which is reported in Section III.5.27 The doubly labeled ester 34 (Scheme 14) is readily available by a Wittig- Homer condensation of benzyloxyacetaldehyde with commercially available triethylphosphono-(l,2-l3C2)acetate. Chirality was introduced by the reduction of ester 34 to the allylic alcohol, which produced the chiral epoxide 35 by the Sharpless epoxidation procedure. This was converted into the tetrose 36, and thence, into the protected pentulose 37 by the usual sequence of Grignard reaction and oxidation. 

Asymmetric epoxidation is another important area of activity, initially pioneered by Sharpless, using catalysts based on titanium tetraisoprop-oxide and either (+) or (—) dialkyl tartrate. The enantiomer formed depends on the tartrate used. Whilst this process has been widely used for the synthesis of complex carbohydrates it is limited to allylic alcohols, the hydroxyl group bonding the substrate to the catalyst. Jacobson catalysts (Formula 4.3) based on manganese complexes with chiral Shiff bases have been shown to be efficient in epoxidation of a wide range of alkenes. 

Fig. 12.4. Successive models of the transition state for Sharpless epoxidation. (a) the hexacoordinate Ti core with uncoordinated alkene (b) Ti with methylhydroperoxide, allyl alcohol, and ethanediol as ligands (c) monomeric catalytic center incorporating t-butylhydroperoxide as oxidant (d) monomeric catalytic center with formyl groups added (e) dimeric transition state with chiral tartrate model (E = CH = O). Reproduced from J. Am. Chem. Soc., 117, 11327 (1995), by permission of the American Chemical Society. 

One of the earliest and most important discoveries in metal-catalyzed asymmetric synthesis is Sharpless s Ti-catalyzed epoxidation of allylic alcohols. A mere mention of all the total syntheses that have used this technology would require a separate review article Here, we select Trost s masterful total synthesis of solamin (100, Scheme 14), for its beautiful and multiple use of Sharpless s asymmetric epoxidation.1161 Optically pure epoxy alcohol 95 is converted to both epoxy iodide 96 and diol 97 The latter two intermediates are then united to give 98, which is oxidized and converted to dihydrofuran 99 by a Ramberg-Backlund transformation. The Re catalyzed butenolide annulation that is used to afford the requisite unsaturated lactone only adds to the efficiency of this beautiful total synthesis. 

Oxidation of allylic alcohols and enones.3 These substrates are cleaved to dicarboxylic acids and keto acids by Sharpless catalytic Ru02 oxidation. Examples ... 

An important breakthrough in asymmetric epoxidation has been the Katsuki-Sharpless invention [1], The reaction uses a chiral Ti(IV) catalyst, t-butylhydroperoxide as the oxidant and it works only for allylic alcohols as the substrate. In the first report titanium is applied in a stoichiometric amount. The chirality is introduced in the catalyst by reacting titanium tetra-isopropoxide... 

After the "asymmetric epoxidation" of allylic alcohols at the very beginning of the 80 s, at the end of the same decade (1988) Sharpless again surprised the chemical community with a new procedure for the "asymmetric dihydroxylation" of alkenes [30]. The procedure involves the dihydroxylation of simple alkenes with N-methylmorpholine A -oxide and catalytic amounts of osmium tetroxide in acetone-water as solvent at 0 to 4 °C, in the presence of either dihydroquinine or dihydroquinidine p-chlorobenzoate (DHQ-pClBz or DHQD-pClBz) as the chiral ligands (Scheme 10.3). 

Scheme 8 summarizes the introduction of the missing carbon atoms and the diastereoselective epoxidation of the C /C double bond using a Sharpless asymmetric epoxidation (SAE) of the allylic alcohol 64. The primary alcohol 62 was converted into the aldehyde 63 which served as the starting material for a Horner-Wadsworth-Emmons (HWE) reaction to afford an E-configured tri-substituted double bond. The next steps introduced the sulfone moiety via a Mukaiyama redox condensation and a subsequent sulfide to sulfone oxidation. The sequence toward the allylic alcohol 64 was com-... 

Reactions where NLE have been discovered include Sharpless asymmetric epoxi-dation of allylic alcohols, enantioselective oxidation of sulfides to sulfoxides, Diels-Alder and hetero-Diels-Alder reactions, carbonyl-ene reactions, addition of MesSiCN or organometallics on aldehydes, conjugated additions of organometal-lics on enones, enantioselective hydrogenations, copolymerization, and the Henry reaction. Because of the diversity of the reactions, it is more convenient to classify the examples according to the types of catalyst involved. 

Asymmetric epoxidation of olefins is an effective approach for the synthesis of enan-tiomerically enriched epoxides. A variety of efficient methods have been developed [1, 2], including Sharpless epoxidation of allylic alcohols [3, 4], metal-catalyzed epoxidation of unfunctionalized olefins [5-10], and nucleophilic epoxidation of electron-deficient olefins [11-14], Dioxiranes and oxazirdinium salts have been proven to be effective oxidation reagents [15-21], Chiral dioxiranes [22-28] and oxaziridinium salts [19] generated in situ with Oxone from ketones and iminium salts, respectively, have been extensively investigated in numerous laboratories and have been shown to be useful toward the asymmetric epoxidation of alkenes. In these epoxidation reactions, only a catalytic amount of ketone or iminium salt is required since they are regenerated upon epoxidation of alkenes (Scheme 1). 

This method has proven to be an extremely useful means of synthesizing enantiomerically enriched compounds. Various improvements in the methods for carrying out the Sharpless oxidation have been developed.48 The reaction can be done with catalytic amounts of titanium isopropoxide and the tartrate ester.49 This procedure uses molecular sieves to sequester water, which has a deleterious effect on both the rate and enantioselectivity of the reaction. Scheme 12.9 gives some examples of enantioselective epoxidation of allylic alcohols. 

---