Alkenes simple

Tripylborane is an interesting reagent which resembles thexylborane. One of the important uses of thexylborane lies in the synthesis of unsymmetrical thexyldialkylboranes which can then be used in the synthesis of unsymmetrical ketones. However, the reaction is only successful if the alkene used in the first hydroboration step is an internal alkene. Simple terminal alkenes such as 1-hexene react too rapidly with the initially formed thexylmonoalkylborane to allow the reaction to be stopped at that stage. Therefore, mixtures of products result (ref. 27). 

Monosubstituted Alkenes. Simple unbranched terminal alkenes that have only alkyl substituents, such as 1-hexene,2031-octene,209 or ally Icy clohexane230 do not undergo reduction in the presence of organosilicon hydrides and strong acids, even under extreme conditions.1,2 For example, when 1-hexene is heated in a sealed ampoule at 140° for 10 hours with triethylsilane and excess trifluoroacetic acid, only a trace of hexane is detected.203 A somewhat surprising exception to this pattern is the formation of ethylcyclohexane in 20% yield upon treatment of vinylcyclohexane with trifluoroacetic acid and triethylsilane.230 Protonation of the terminal carbon is thought to initiate a 1,2-hydride shift that leads to the formation of the tertiary 1-ethyl-1-cyclohexyl cation.230... 

Disubstituted Alkenes. Simple 1,2-disubstituted alkenes such as 2-octene or cyclohexene, which produce only secondary aliphatic carbocation reaction intermediates, do not undergo reduction upon treatment with a Brpnsted acid and an organosilicon hydride. Even when extreme conditions are employed, only traces of reduction products are detected.192 203 207-210,214 An exception is the report that 4-methyl-2-pentene forms 2-methylpentane in 70% yield when heated to 50° for 20 hours with a mixture of Et3SiH/TFA containing a catalytic amount of sulfuric acid. It is believed that 4-methyl-2-pentene is isomerized to 2-methyl-2-pentene prior to reduction.203... 

One of the earliest uses of palladium(II) salts to activate alkenes towards additions with oxygen nucleophiles is the industrially important Wacker process, wherein ethylene is oxidized to acetaldehyde using a palladium(II) chloride catalyst system in aqueous solution under an oxygen atmosphere with cop-per(II) chloride as a co-oxidant.1,2 The key step in this process is nucleophilic addition of water to the palladium(II)-complexed ethylene. As expected from the regioselectivity of palladium(II)-assisted addition of nucleophiles to alkenes, simple terminal alkenes are efficiently converted to methyl ketones rather than aldehydes under Wacker conditions. 

General Characteristics. In accordance with the high tendency for formation of Co(CO)4 (2 ) and the acidity of (3), the former componnd behaves in many respects as a psendohalide see Pseudohalide). Relative rates of electrophilic snbstitntion with Mel and MeOTs classify (2 ) as a hard and relatively weak nncleophile see Hard Soft Acids and Bases). Compounds of the type RCo(CO)4 are prepared by two different methods reaction of an electrophihc halide, snlfate, or tosylate (RX) with (2 ), or reaction of HCo(CO)4 with alkenes. Simple alkyl derivatives have low stability nevertheless, many studies have been conducted in which species have been identified as RCo(CO)4 intermediates. Apart from alkyl and aryl derivatives, for example MeCo(CO)4 and PhCo(CO)4, (2 ) forms derivatives with main group residues R3E and R2E and with the main group metals Zn, Cd, and Hg as well as with transition metals, as shown by examples in Scheme 4. Co E bonding in these compounds appears to be predominantly covalent. The bond distances can be long, and consequently, the coordination number of Co can be high. 

In addition to the volatile silanes, silicon also forms non-volatile hydrides with formulae (SiHj) , but little is known about their structure. Silicon, however, does not form unsaturated hydrides corresponding to the simple alkenes. 

Cobalt has an odd number of electrons, and does not form a simple carbonyl in oxidation state 0. However, carbonyls of formulae Co2(CO)g, Co4(CO)i2 and CoJCO),6 are known reduction of these by an alkali metal dissolved in liquid ammonia (p. 126) gives the ion [Co(CO)4] ". Both Co2(CO)g and [Co(CO)4]" are important as catalysts for organic syntheses. In the so-called oxo reaction, where an alkene reacts with carbon monoxide and hydrogen, under pressure, to give an aldehyde, dicobalt octacarbonyl is used as catalyst ... 

The above simple process cannot be applied to the preparation of the homo-logues a higher temperature is requir (di-n-amyl ether, for example, boils at 169°) and, under these conditions, alkene formation predominates, leading ultimately to carbonisation and the production of sulphur dioxide. If, however, the water is largely removed by means of a special device (see Fig. Ill, 57,1) as soon as it is formed, good 300 of ethers may be obtained from primary alcohols, for example ... 

That looks simple and direct don t it If safrole was used as the alkene one would get safrole-azide as product. Just one teensy little reduction away from MDA. Strike also found some azide papers that, with a little work, will get safrole-azide in a totally different way. Strike came across a lot of work where groups were using dinucleophilic addition to get an azide and a halogen added across a double bond. The azide would always go to the beta secondary carbon and the halogen to the primary carbon (just what one would want if safrole was the substrate). 

Catalytic hydrogenation is mostly used to convert C—C triple bonds into C C double bonds and alkenes into alkanes or to replace allylic or benzylic hetero atoms by hydrogen (H. Kropf, 1980). Simple theory postulates cis- or syn-addition of hydrogen to the C—C triple or double bond with heterogeneous (R. L. Augustine, 1965, 1968, 1976 P. N. Rylander, 1979) and homogeneous (A. J. Birch, 1976) catalysts. Sulfur functions can be removed with reducing metals, e. g. with Raney nickel (G. R. Pettit, 1962 A). Heteroaromatic systems may be reduced with the aid of ruthenium on carbon. 

A rational classification of reactions based on mechanistic considerations is essential for the better understanding of such a broad research field as that of the organic chemistry of Pd. Therefore, as was done in my previous book, the organic reactions of Pd are classified into stoichiometric and catalytic reactions. It is essential to form a Pd—C cr-bond for a synthetic reaction. The Pd— C (T-bond is formed in two ways depending on the substrates. ir-Bond formation from "unoxidized forms [1] of alkenes and arenes (simple alkenes and arenes) leads to stoichiometric reactions, and that from oxidized forms of alkenes and arenes (typically halides) leads to catalytic reactions. We first consider how these two reactions differ. 

The Pd—C cr-bond can be prepared from simple, unoxidized alkenes and aromatic compounds by the reaction of Pd(II) compounds. The following are typical examples. The first step of the reaction of a simple alkene with Pd(ll) and a nucleophile X or Y to form 19 is called palladation. Depending on the nucleophile, it is called oxypalladation, aminopalladation, carbopalladation, etc. The subsequent elimination of b-hydrogen produces the nucleophilic substitution product 20. The displacement of Pd with another nucleophile (X) affords the nucleophilic addition product 21 (see Chapter 3, Section 2). As an example, the oxypalladation of 4-pentenol with PdXi to afford furan 22 or 23 is shown. 

The oxidation of simple internal alkenes is very slow. The clean selectiv oxidation of a terminal double bond in 40, even in the presence of an internt double bond, is possible under normal conditions[89,90]. The oxidation c cyclic alkenes is difficult, but can be carried out under selected condition Addition of strong mineral acids such as HCIO4, H2S04 and HBF4 accelerate the oxidation of cyclohexene and cyclopentene[48,91], A catalyst system 0 PdSO4-H3PM06W6Oii(j [92] or PdCF-CuCF m EtOH is used for the oxidatioi of cyclopentene and cyclohexene[93]. 

The isoflavone 406 is prepared by the indirect a-phenylation of a ketone by reaction of phenylmercury(II) chloride with the enol acetate 405, prepared from 4-chromanone[371]. A simple synthesis of pterocarpin (409) has been achieved based on the oxypalladation of the oriho-mercurated phenol derivative 408 with the cyclic alkene 407[372,373]. 

In the reaction of Q,/3-unsaturated ketones and esters, sometimes simple Michael-type addition (insertion and hydrogenolysis, or hydroarylation, and hydroalkenylation) of alkenes is observed[53,54]. For example, a simple addition product 56 to methyl vinyl ketone was obtained by the reaction of the heteroaromatic iodide 55[S5]. The corresponding bromide affords the usual insertion-elimination product. Saturated ketones are obtained cleanly by hydroarylation of o,/3l-unsaturated ketones with aryl halides in the presence of sodium formate, which hydrogenolyses the R—Pd—I intermediate to R— Pd—H[56]. Intramolecular hydroarylation is a useful reaction. The diiodide 57 reacts smoothly with sodium formate to give a model compound for the afla-toxin 58. (see Section 1.1.6)[57]. Use of triethylammonium formate and BU4NCI gives better results. 

Furthei-more, the cyclization of the iododiene 225 affords the si.x-membered product 228. In this case too, complete inversion of the alkene stereochemistry is observed. The (Z)-allylic alcohol 229 is not the product. Therefore, the cyclization cannot be explained by a simple endo mode cyclization to form 229. This cyclization is explained by a sequence of (i) e.vo-mode carbopallada-tion to form the intermediate 226, (ii) cydopropanation to form 227. and (iii) cyclopropylcarbinyl to homoallyl rearrangement to afford the (F3-allylic alcohol 228[166]. (For further examples of cydopropanation and endo versus e o cyclization. see Section 1.1.2.2.)... 

Under CO pressure in alcohol, the reaction of alkenes and CCI4 proceeds to give branched esters. No carbonylation of CCI4 itself to give triichloroacetate under similar conditions is observed. The ester formation is e.xplained by a free radical mechanism. The carbonylation of l-octene and CCI4 in ethanol affords ethyl 2-(2,2,2-trichloroethyl)decanoate (924) as a main product and the simple addition product 925(774]. ... 

ZnCl2 is essential. The reaction was utilized in the synthesis of strophanthidin. Only the q, /3-alkene in the a, fi- and 7, (5-unsaturated ketone 51 is reduced selectively[47], Triethoxysilane is another reducing agent of the enone 52 and simple alkenes[48]. 

Addition of nucleophiles to both activated and unactivated alkenes is catalyzed by Pd(II). Addition of alcohols or AcOH to alkenes bearing EWGs is catalyzed by PdCl2(PhCN)2 to give the corresponding ethers and esters. The addition of an alcohol to the cyclic acetal of acrolein 82 to give the ether 83 is also possible with the same catalyst[64]. Amines add to the vinylic ether 84 to give 85, but not to simple alkenes[65]. 

The diminished rr electron density m the double bond makes a p unsaturated aide hydes and ketones less reactive than alkenes toward electrophilic addition Electrophilic reagents—bromine and peroxy acids for example—react more slowly with the carbon-carbon double bond of a p unsaturated carbonyl compounds than with simple alkenes... 

Ordinarily nucleophilic addition to the carbon-carbon double bond of an alkene is very rare It occurs with a p unsaturated carbonyl compounds because the carbanion that results IS an enolate which is more stable than a simple alkyl anion... 

Isopentenyl pyrophosphate and dimethylallyl pyrophosphate are structurally sim liar—both contain a double bond and a pyrophosphate ester unit—but the chemical reactivity expressed by each is different The principal site of reaction m dimethylallyl pyrophosphate is the carbon that bears the pyrophosphate group Pyrophosphate is a reasonably good leaving group m nucleophilic substitution reactions especially when as in dimethylallyl pyrophosphate it is located at an allylic carbon Isopentenyl pyrophosphate on the other hand does not have its leaving group attached to an allylic carbon and is far less reactive than dimethylallyl pyrophosphate toward nucleophilic reagents The principal site of reaction m isopentenyl pyrophosphate is the carbon-carbon double bond which like the double bonds of simple alkenes is reactive toward electrophiles... 

In contrast, the ultrasonic irradiation of organic Hquids has been less studied. SusHck and co-workers estabHshed that virtually all organic Hquids wiU generate free radicals upon ultrasonic irradiation, as long as the total vapor pressure is low enough to allow effective bubble coUapse (49). The sonolysis of simple hydrocarbons (for example, alkanes) creates the same kinds of products associated with very high temperature pyrolysis (50). Most of these products (H2, CH4, and the smaller 1-alkenes) derive from a weU-understood radical chain mechanism. 

Mono-, di-, and trialkylboranes may be obtained from olefins and the trifunctional borane molecule. Simple unhindered alkenes yield trialkylboranes and it is not possible to halt the reaction at the mono- or dialkylborane stage. With more hindered and trisubstituted alkenes the reaction can be controlled to stop at the dialkylborane stage. 

Its reactions with olefins, governed by steric rather than electronic factors, are very sluggish. Even simple 1-alkenes require 8 h at 25°C for complete reaction. In contrast, alkynes are hydroborated with great ease to alkenylboranes, high steric requirements of the reagent preventing dihydroboration (117). 

Usually, organoboranes are sensitive to oxygen. Simple trialkylboranes are spontaneously flammable in contact with air. Nevertheless, under carefully controlled conditions the reaction of organoboranes with oxygen can be used for the preparation of alcohols or alkyl hydroperoxides (228,229). Aldehydes are produced by oxidation of primary alkylboranes with pyridinium chi orochrom ate (188). Chromic acid at pH < 3 transforms secondary alkyl and cycloalkylboranes into ketones pyridinium chi orochrom ate can also be used (230,231). A convenient procedure for the direct conversion of terminal alkenes into carboxyUc acids employs hydroboration with dibromoborane—dimethyl sulfide and oxidation of the intermediate alkyldibromoborane with chromium trioxide in 90% aqueous acetic acid (232,233). 

The addition proceeds in three discrete steps and the intermediates can be isolated. Simple alkenes are less reactive than alkynes and do not undergo the addition to aHylic boranes, but electron-rich alkyl vinyl ethers react at moderate temperatures to give 1,4-dienes or dienyl alcohols (440). 

---