Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Processivity factor

Surface Area. Surface area is the available area of fillers, be it on the surface or in cracks, crevices, and pores. The values obtained from different methods for measuring the surface area of a filler may vary significandy. These variations are because of the nature of the methods and in many instances yield information related to the heterogeneity of the surface. Understanding the surface area is important because many processing factors are dependent on the surface area, eg, ease of filler dispersion, rheology, and optimum filler loading. [Pg.367]

Up to Harvest. Oilseed rape and field beans are used as break crops for winter wheat on a variety of soils, and potatoes are used on the lighter soils. Sugar beet may also be grown, but this depends not only on the soil but also on the proximity of a sugar beet processing factor. Four Rothamsted-based experiments compared the effectiveness of winter wheat and winter oilseed rape in their use of labelled nitrogen fertilizer. Potatoes were included in two of these experiments and sugar beet and field beans in one experiment each. Two criteria based on the... [Pg.12]

The layers of protection are expensive to build and maintain throughout the life of the process. Factors include initial capital expense, operating costs, safety training cost, maintenance cost, and diversion of scarce and valuable technical resources into maintenance and operation of the layers of protection. [Pg.8]

Sections 2.5.1 to 2.5.7 are not an exhaustive list of equipment, process, maintenance, and data processing factors that influence failure rate, but they are an attempt to make the reader aware of the problems. The following example illustrates some of the points made ... [Pg.13]

In Reaction 12-9 treatment of Z—CH2—Z with tosyl azide gives diazo transfer. When this reaction is performed on a compound with a single Z group, formation of the azide becomes a competing process. " Factors favoring azide formation rather than diazo transfer include as the enolate counterion rather than Na orLi and... [Pg.781]

Enzymatic hydrolysis is affected by numerous process factors including pH, temperature, reaction time, and enzyme loading. These factors often interact with one another. In the current study the main and interactive effects of four factors (reaction time, enzyme to... [Pg.121]

The technical evaluation of a process includes the determination of the technical risk during design, start-up, and operation of the process. Factors increasing the technical risk are ... [Pg.206]

The technique is based on the premise that the capital cost is determined by a number of significant processing steps in the overall process. Factors are usually included to allow for the capacity, and complexity of the process material of construction, yield, operating pressure and temperature. [Pg.249]

Kalt W. 2005. Effects of production and processing factors on major fruit and vegetable antioxidants. J Food... [Pg.215]

Yarwood, R. J., Phillips, A. J. Processing factors influencing the stability of freeze-dried sodium ethacrinate. Pharmaceutical Technology Drug Stabilization, p. 40-48, 1989. Edited by Rubinstein, Michael, Verlag Ellis Horwood, Chichester, UK. [Pg.121]

The chemical and most process factors affecting the index are quite straightforward to estimate. More problematic are the equipment safety and the safety of process structure. The equipment safety subindex was developed based on evaluation of accident statistics and layout information. The evaluation of the safe process structure subindex is based on case-based reasoning, which requires experience based information on accident cases and on the operation characteristics of different process configurations. [Pg.121]

Onium salts, crown ethers, alkali metal salts or similar chelated salts, quaternary ammonium and phosphonium are some of the salts which have been widely used as phase transfer catalysts (PTC). The choice of phase transfer catalysts depends on a number of process factors, such as reaction system, solvent, temperature, removal and recovery of catalyst, base strength etc. [Pg.166]

Coupling with Other Flotation Process Factors... [Pg.260]

A major part of Taguchi s philosophy centers around the separation of effects caused by noise factors and effects caused by control factors. Control factors are variables that are under the control of the experimenter flow rate, pH, concentration, reactor temperature, etc. In contrast, noise factors are variables that are not under the control of the experimenter ambient temperature, ambient humidity, identity of process operator (Joe or Jane), source of raw material, etc. Control factors are sometimes called process factors noise factors are sometimes called environmental factors. [Pg.349]

Dodge, K.A. and Coie, J.D. (1987) Social information processing factors in reactive and proactive aggression in children s peer groups. / Pers Soc Psychol 53 1146-1158. [Pg.221]

In some interesting studies, artificial tongues are employed to evaluate the effect of a number of process factors on the quality of the finished products (Esbensen et al., 2004 Rollm de Moura et al., 2007 Rudnitskaya et ah, 2009b) or the effects of storage time and conditions (Apetrei et ah, 2007 Cosio et ah, 2007 Kantor et ah, 2008 Parra et ah, 2006a Rodriguez-Mendez et ah, 2007). [Pg.66]


See other pages where Processivity factor is mentioned: [Pg.427]    [Pg.327]    [Pg.107]    [Pg.120]    [Pg.230]    [Pg.256]    [Pg.58]    [Pg.94]    [Pg.102]    [Pg.67]    [Pg.262]    [Pg.552]    [Pg.1265]    [Pg.123]    [Pg.695]    [Pg.114]    [Pg.114]    [Pg.607]    [Pg.807]    [Pg.231]    [Pg.589]    [Pg.625]    [Pg.55]    [Pg.61]    [Pg.255]    [Pg.194]    [Pg.97]    [Pg.22]    [Pg.110]    [Pg.122]    [Pg.217]    [Pg.440]    [Pg.440]    [Pg.268]   
See also in sourсe #XX -- [ Pg.1549 ]




SEARCH



Amplification process factor

Analysis of the Variances for Two Factors Processes

Batch process units size factor

Between the Factors of a Process

Blending processes, affecting factors

Blending processes, affecting factors density

Blending processes, affecting factors shape

Blending processes, affecting factors temperature

Catalytic process, physical factors

Causal factor identification process

Charge-transfer processes, influencing factors

Chemical processes, factors influencing

Chemical processes, factors influencing design

Chemical reaction processes factor range selection

Chemical reaction processes factor screening

Chromatographic processes capacity factor

Colony-stimulating factors processing

Communication processes effectiveness factor

Communication processes efficiency factor

Coupling with Other Flotation Process Factors

Design factors, process plant building

Design process human error factors

Dimensional Scaling Factors for the Mass Transfer Rate Processes

Downstream processing, influencing factors

Dyeing process adsorption factor

Dyeing process dispersion factor

Efficiency Scaleup Process Factors

Electron-transfer processes factors influencing reaction

Environmental Factors in Process Design

Etch Factor as a Function of Process Conditions

Factors Affecting Processing Power and Bandwidth

Factors Affecting the Granulation Process and Granule Properties

Factors Favouring the Dual-Pressure Process

Factors Favouring the Single-Pressure Process

Factors Influencing Processing of Metal Matrix Composites

Factors Influencing the Reversible Dissociation and Formation Processes

Factors Involved in Economic Improvement to Typical Processes and Guidelines for Assessment

Factors affecting the burning process

Factors chemical reaction processes

Factors process

Factors process

Factors that Adversely Affect Processing

Factors that affect the electrospinning process

Fault hazard analysis process factors

Formulation and processing factors

Franck-Condon factors electron transfer processes

Fruits processed, flavor factors

Functionality processing factors affecting

Growth factors processing

Heat transfer process, influencing factors

Human Factors Process

Human factors element system safety process

Human factors incident investigation process

Human factors process safety management

Human factors task analysis process

Inherently safer chemical processes human factors

Injection molding process control factors

Key Factors to Consider in Process Plant Building Risk Assessments

Lubrication performance factors, for chemical process plant machinery

Meat processing technology, factors

Melt processing factors

Metals processing factors influencing corrosion

Mixed factors, processes, variables

Mobility factors/processes

Noise factors, manufacturing processes

Organizational factors chemical processing industry

Other Factors Affecting the Melting Process of Polymer Crystals

Performance Factors for Chemical Process Plant Machinery Jim C. Fitch and Drew D. Troyer

Process Development Critical Factors for the Application of (Heterogeneous) Enantioselective Catalysts

Process Development Critical Factors for the Application of Catalysts

Process analysis environmental factors

Process analysis influencing factors

Process design factors

Process design, safety factors

Process development factor levels

Process evaluation 0.6” factor estimates

Process evaluation factors

Process geometric factors

Process growth factor

Process selection influencing factors

Process unit hazard factor

Processing effect safety factor

Processing factors affecting functionality extraction

Processing factors affecting functionality impurities

Processing factors affecting functionality temperature

Processing meat determinant factors

Processing—Key Factors

Processivity factor trigonal

Rate processes controlling factors

Relative sensitivity factor process

Roller compaction process factors

Siting factors, process plant building

Skill 4.1d-Explain how factors such as temperature, pressure, and surface area affect the dissolving process

Some Risk Factors in Processes and Projects

Statistical process control factors

The Corrosion Process and Affecting Factors

Transcription factors transcriptional process

Vacuum deposition processes operational factors

Vascular endothelial growth factor processing

© 2024 chempedia.info