Chemical processes, factors influencing

The final composition of stream water is the product of the weathering reactions and related processes outlined above. However, the chemical processes are influenced and controlled by an intricate combination of environmental factors that are characteristic for each drainage system. Therefore, the composition of the bedrock in an area and the residual material left at the surface as soil and subsoil exert a strong influence on the chemical composition of mnoff from the area. The reactions of water with this material are the ultimate geological control and are the source of soluble weathering products. 

Before discussing the purely chemical potential factors influencing the free energy of the transition state on different metals at a given potential V [Eq. (24)], we shall consider the fact that the rate-constant values [k in Eq. (16)] depend on potential (on a reference scale) in processes where electron transfer is involved. It is clear from Eq. (24) that AG depends on V, the standard reference potential. Using Eqs. (23) and (24), we obtain... 

Volatilization. The susceptibility of a herbicide to loss through volatilization has received much attention, due in part to the realization that herbicides in the vapor phase may be transported large distances from the point of application. Volatilization losses can be as high as 80—90% of the total applied herbicide within several days of application. The processes that control the amount of herbicide volatilized are the evaporation of the herbicide from the solution or soHd phase into the air, and dispersal and dilution of the resulting vapor into the atmosphere (250). These processes are influenced by many factors including herbicide application rate, wind velocity, temperature, soil moisture content, and the compound s sorption to soil organic and mineral surfaces. Properties of the herbicide that influence volatility include vapor pressure, water solubility, and chemical stmcture (251). 

In the previous chapter, a comprehensive description was provided, from four complementary perspectives, of the process of how human errors arise during the tasks typically carried out in the chemical process industry (CPI). In other words, the primary concern was with the process of error causation. In this chapter the emphasis will be on the why of error causation. In terms of the system-induced error model presented in Chapter 1, errors can be seen as arising from the conjunction of an error inducing environment, the intrinsic error tendencies of the human and some initiating event which triggers the error sequence from this imstable situation (see Figure 1.5, Chapter 1). This error sequence may then go on to lead to an accident if no barrier or recovery process intervenes. Chapter 2 describes in detail the characteristics of the basic human error tendencies. Chapter 3 describes factors which combine with these tendencies to create the error-likely situation. These factors are called performance-influencing factors or PIFs. 

The rate of a chemical reaction is influenced by pressure, temperature, concentration of reactants, kinetic factors such as agitation, and the presence of a catalyst. Since the viability of a plant depends not only on reaction efficiencies but also on the capital cost factor and the cost of maintenance, it may be more economic to alter a process variable in order that a less expensive material of construction can be used. The flexibility which the process designer has in this respect depends on how sensitive the reaction efficiency is to a change in the variable of concern to the materials engineer. 

The pH of a system greatly influences what chemical processes will occur in the deep-well environment. Directly or indirectly, pH also affects most of the other environmental factors. Table 20.12 summarizes the significance and some major effects of changes in pH on chemical processes and environmental factors in the deep-well environment. 

Since homolytic or radical processes are largely governed by the effects of bond dissociation energies, a knowledge of BDE is required for the evaluation of chemical reactivity in such reactions. However, we have found, as we mention later, that BDE s are also an important factor influencing other types of reactions involving bond heterolyses. 

Chemical carcinogenesis by polycyclic aromatic hydrocarbons (PAHs) is a multi-step process in which each of the steps must occur if a neoplasm is to develop. Thus, exposure to PAHs alone is not necessarily sufficient for the induction of a tumor. Many of these factors are summarized below and are discussed in various chapters of this volume. Considered here will be those factors influencing the reactions of the metabolically activated forms of the PAHs with DNA and the ways in which adducts may be detected and characterized. 

From the above it can be concluded that only the reaction with component B may enhance mass transfer of ozone substantially. And only if the Hatta number HaB is much higher than 1. Therefore it can be expected that whenever we have to deal with an enhancement of mass transfer due to chemical reactions, this influences the selectivity of the oxidation process in a negative way. The factor which has to be considered in this respect is the Hatta number for the reaction of ozone with component B (equation 29). HaB increases with increasing value of kB and CBb and with decreasing value of the mass transfer coefficient for ozone, kHq,... 

Chemical kinetics deals with the rates of chemical reactions, factors which influence the rates and the explanation of the rates in terms of the reaction mechanisms of chemical processes. 

Despite the fact that electron transfer reactions at the electrode/electrolyte interface are of fundamental importance to many chemical processes, a quantitative understanding of the factors that influence the rate of these reactions is still lacking. Although the general theoretical framework was established many years ago by Marcus, Levich, Dogonadze, and oth-... 

What emerges here is a picture in which the carcinogenic process is influenced by a fairly long list of factors, and is either aided or inhibited by these factors. When we administer a chemical to lab animals and count tumors at the end of their lives, we are observing only two points, and not particularly interesting points, connected by a long sequence of molecular and cellular events. 

This previous definition had been broadened after the FDA s issue of the PAT guidance document to encompass aU factors influencing the quality and efficiency of a chemical or pharmaceutical manufacturing process. Driven by developments in Six-Sigma and operational excellence programs an extended definition included such items as ... 

The Control of the RaactlvKy of Solids. A Critical Survey of the Factors that Influence the Reactivity of Solids, with Special Emphasis on the Control of the Chemical Processes in Relation to Practical Applications, by V. V. Boldyrev, M. Bulans and B. Delmon... 

Results of these investigations demonstrate that changes of the reactor surface can be an effective method for directing chemical reactions. Thus, developing a theory of how heterogeneous factors influence liquid-phase chain reactions is one of the important lines of advancement in this area. Only a few years ago it was thought, almost a priori, that there are practically no heterogeneous factors in liquid-phase oxidation and that liquid-phase processes differ from vapor-phase processes in this respect. 

The factors influencing the functional properties of protein products are the innate characteristics (physico-chemical) of proteins, and processing and modification steps that alter them. Physico-chemical properties include ... 

---