Polybenzimidazole blends acid-base

Poiyphosphazene Biends Blends of sulfonated polyphosphazene, for example, sulfonated poly[bis(3-methylphenoxy)phosphazene] or poly[(bisphenoxy)phosphazene] (see Fig. 29.14) with either an inert organic polymer such as poly(vinylidene fluoride) (Pintauro and Wycisk, 2004 Wycisk et al., 2002) or polyacrylonitrile (Carter et al., 2002) or a reactive polymer (e.g., polybenzimidazole) (Wycisk et al., 2005) have been investigated. The resultant membranes had conductivities of 0.01-0.06 S/cm (in water at 25°C) and equilibrium water swelling from 20 to 60% (at 25°C). Blends of poly[(bisphe-noxy)phosphazene] and polybenzimidazole (where acid-base complexation occurred between the sulfonic acid and the imidazole nitrogen) exhibited good mechanical properties and low methanol permeability. MEAs with this membrane material outperformed Nafion 117 in a DMFC at 60°C with concentrated (5-10 M) methanol feeds. With 1.0 M methanol and 0.5 L/min ambient air at 60°C, the maximum power density was 97 mW/cm and the methanol crossover was 2.5 times lower than that with Nafion 117 (Wycisk et al., 2005). 

The acid-base Nafion composite membranes include blends of Nafion with polypyrrole (PPy) [98-104], polybenzimidazole (PBI) [105-107], poly (propyleneoxide) (PPO) [108, 109], polyfurfuryl alcohol (PFA) [110], poly(vinyl alcohol) (PVA) [111-115], sulfonated phenol-formaldehyde (sPF) [116], polyvinylidene fluoride (PVdF) [117-122], poly(p-phenylene vinylene) (PPV) [123], poly(vinyl pyrrolidone) (PVP) [124] polyanifine (PANI) [125-128], polyethylene (PE) [129], poly(ethylene-terephtalate) [130], sulfated p-cyclodextrin (sCD) [131], sulfonated poly(ether ether ketone) (sPEEK) [132-135], sulfonated poly(aryl ether ketone) (sPAEK) [136], poly(arylene ether sulfone) (PAES) [137], poly(vinylimidazole) (PVl) [138], poly(vinyl pyridine) (PVPy) [139], poly (tetrafluoroethylene) (PTFE) [140-142], poly(fluorinated ethylene-propylene) [143], sulfonated polyhedral oligomeric silsesquioxane (sPOSS) [144], poly (3,4-ethylenedioxythiophene) (PEDT) [145, 146], polyrotaxanes (PR) [147], purple membrane [148], sulfonated polystyrene (PSSA) [149, 150], polystyrene-b-poly(ethylene-ran-butylene)-bpolystyrene (SEES) [151], poly(2-acrylamido-2-methyl-l-propanesulphonic acid-co-l,6-hexanediol propoxylate diacrylate-co-ethyl methacrylate) (AMPS) [152], and chitosan [31]. A binary PVA/chitosan [153] and a ternary Nafion composite with PVA, polyimide (PI) and 8-trimethoxy silylpropyl glycerin ether-1,3,6-pyrenetrisulfonic acid (TSPS) has also been reported [154]. 

Kerres et al., among others, developed the acid-base blend membranes from sulfonated polymers and aminated or other basic polymers [98] and concluded that the protonation of the basic groups is incomplete if the base is too weak [99]. Very recently, Frutsaert et al. [70] synthesized novel polymers for the development of high temperature PEMFC membranes comprising a blend of s-PEEK and a fluorinated copolymer bearing imidazole functions as pendant groups. The extensive work on intermediate temperature fuel cell membranes are well reviewed in Chap. 4 of this book including polybenzimidazole as the basic component and sulfonated and phosphonated ionomers of either nonfluorinated or partially fluorinated backbones as the acidic component. 

The scope of the reviewed R D work is limited to intermediate-T acid-base blend membranes prepared by mixing polybenzimidazoles and sulfonated or phosphonated acidic polymers. Other membrane types, where the acid-base concept was used to improve their relevant... 

Fig. 4.4 Polybenzimidazoles used as basic blend components in acid-base blends which are reviewed in this chapter...

The interaction forces between the acidic and basic blend component include electrostatic and hydrogen bridge interaction. The sulfonated poly(ethersulfones) and poly(etherketones) were combined both with commercially available basic polymers (e.g., polybenzimidazole Celazole (Celanese), poly(4-vinylpyridine), polyCethylene imine)), and with self-developed basic polymers derived from poly(ethersulfones) [47] and poly(etherketones), including polymers that carry both sulfonic and basic groups onto the same backbone [48]. A wide variety of acid-base blend membranes with a broad property range were obtained. The most important characterization results of the ionically cross-linked ionomer membranes are... 

Savinell and co-workers, [105-107], who have principally studied phosphoric acid doped polybenzimidazole (PBl). Similar systems have been reported by He and co-workers [108], who in addition report the conductivities of PBl based membranes doped with PTA and zirconium hydrogen phosphate [108], Acid-base interactions in entirely polymeric systems have been reported by Kerres and co-workers [102], who prepared and stndied several membranes prepared by blending polymers with acidic (snlfonated-PEEK, sulfonated polyethersulfone) and basic (polybenzimidazole, poly-vinylpyridine) characteristics. Selected acid-base polymer systems are discnssed in the following. 

In contrast to the Nafion-FEP system, in which the immiscibility of the polymer components is clearly shown in Fig. 14.8, greater compatibility of Nafion and polybenzimidazole (PBI) was expected due to acid-base interactions between imidazole nitrogens and sulfonic acid protons. PBI should function in such a system as a crosslinker (see Fig. 14.15), producing a reduction in membrane swelling and permeability by methanol. Although the idea of examining acid-base membrane blends in fuel cells is not new [9,11-13,30], little work has been carried out with Nafion. 

Trogadas and Ramani summarized the modification of PEM membranes, including Nafion modified by zirconium phosphates, heteropolyacids, hydrogen sulfates, metal oxides, and silica. Membranes with sulfonated non-fluorinated backbones were also described. The base polymers polysulfone, poly(ether sulfone), poly(ether ether ketone), polybenzimidazole, and polyimide. Another interesting category is acid-base polymer blend membranes. This review also paid special attention to electrode designs based on catalyst particles bound by a hydrophobic poly-tetrafluoroethylene (PTFE) structure or hydrophilic Nafion, vacuum deposition, and electrodeposition method. Issues related to the MEA were presented. In then-study on composite membranes, the effects of particle sizes, cation sizes, number of protons, etc., of HPA were correlated with the fuel cell performance. To promote stability of the PTA within the membrane matrix, the investigators have employed PTA supported on metal oxides such as silicon dioxide as additives to Nafion. 

Blends of sulfonated PS and sulfonated PPO have been described in several papers as offering a combination of high proton conductivity and low methanol permeability [104, 105]. Optimum conductivity was obtained with a 50/50 blend of the sulfonated polymers, with each having an identical ion exchange capacity [104]. The miscibility of the PS/PPO system appeared to be maintained with the blend of the sulfonated polymers. Polybenzimidazole (PBI) and polysulfone (PSF) are immiscible however, sulfonated PSF is miscible with PBI and showed utility in phosphoric acid based fuel cells operated upto200°C[106]. PEMs comprised of Nafion and a vinylidene fluoride-hexafluoropropylene copolymer blend were evaluated... 

Acid-Based Blends of Polybenzimidazole and Other Polymers. 91... 

Perfluorinated sulfonic acid polymers, such as Nafion membranes, were the most commonly used materials in practical systems for their high proton conductivity and extremely high oxidative stability. However, due to the poor dimensional stability, low mechanical properties of Nafion at high humidity and high temperature, and high cost, an essential need for cost-effective and reinforced substitutes with improved performance arises [193-195]. Nafion blended with the second component could not only reduce the cost, but also improve the mechanical properties and the dimensional stability. Recently, the reinforced composite membranes based on semi-interpenetrating polymer network (semi-IPN) structures of Nafion , polyimidazole (PI) [196-198], polybenzimidazole (PBI) [199], and poly(vinyIidene fluoride) (PVDF) [200] were reported. As shown in Fig. 2.35, the composite membranes with... 

---