Partially fluorinated

Carter L E and Carter E A1996 Ab initio-derived dynamics for Fj reactions with partially fluorinated Si(IOO) surfaces translational activation as a possible etching tool J. Phys. Chem. 100 873-87... 

CoF is used for the replacement of hydrogen with fluorine in halocarbons (5) for fluorination of xylylalkanes, used in vapor-phase soldering fluxes (6) formation of dibutyl decalins (7) fluorination of alkynes (8) synthesis of unsaturated or partially fluorinated compounds (9—11) and conversion of aromatic compounds to perfluorocycHc compounds (see Fluorine compounds, organic). CoF rarely causes polymerization of hydrocarbons. CoF is also used for the conversion of metal oxides to higher valency metal fluorides, eg, in the assay of uranium ore (12). It is also used in the manufacture of nitrogen fluoride, NF, from ammonia (13). 

This reaction has often reached explosive proportions in the laboratory. Several methods were devised for controlling it between 1940 and 1965. For fluorination of hydrocarbons of low (1—6 carbon atoms) molecular weight at room temperature or below by these methods, yields as high as 80% of perfluorinated products were reported together with partially fluorinated species (9—11). However, fluorination reactions in that eta involving elemental fluorine with complex hydrocarbons at elevated temperatures led to appreciable cleavage of the carbon—carbon bonds and the yields invariably were only a few percent. 

In 1954 the surface fluorination of polyethylene sheets by using a soHd CO2 cooled heat sink was patented (44). Later patents covered the fluorination of PVC (45) and polyethylene bottles (46). Studies of surface fluorination of polymer films have been reported (47). The fluorination of polyethylene powder was described (48) as a fiery intense reaction, which was finally controlled by dilution with an inert gas at reduced pressures. Direct fluorination of polymers was achieved in 1970 (8,49). More recently, surface fluorinations of poly(vinyl fluoride), polycarbonates, polystyrene, and poly(methyl methacrylate), and the surface fluorination of containers have been described (50,51). Partially fluorinated poly(ethylene terephthalate) and polyamides such as nylon have excellent soil release properties as well as high wettabiUty (52,53). The most advanced direct fluorination technology in the area of single-compound synthesis and synthesis of high performance fluids is currently practiced by 3M Co. of St. Paul, Minnesota, and by Exfluor Research Corp. of Austin, Texas. 

Partial fluorination [50] and perfluorination [5/] of aromatic systems can be accomplished electrochemically. A number of other reagents add fluorine to benzene and its derivatives, as elaborated in equation 5 [52, 53, 54, 551... 

Fluorination of naphthalene in a stream of dilute fluorine over cobalt trifluoride yields a mixture of perfluorodecalins and partially fluorinated naphthalene derivatives that are fully fluorinated to perfluorodecalins by a subsequent treatment with dilute fluorine [23] Perfluorodecalins are also final products ot fluorination of tetralin over cobalt trifluoride at 250 °C. A more thorough investigation of this reacPon revealed seven additional compounds as products and intermediates [//] (equation 6). 

A more efficient agent than peroxy compounds for the epoxidation of fluoro-olefins with nonfluonnated double bond is the hypofluorous acid-acetomtrile complex [22] Perfluoroalkylethenes react with this agent at room temperature within 2-3 h with moderate yields (equation 13), whereas olefins with strongly electron-deficient double bond or electron-poor, sterically hindered olefins, for example l,2-bis(perfluorobutyl)ethene and perfluoro-(l-alkylethyl)ethenes, are practically inert [22] Epoxidation of a mixture of 3 perfluoroalkyl-1-propenes at 0 C IS finished after 10 mm in 80% yield [22] The trifluorovinyl group in partially fluorinated dienes is not affected by this agent [22] (equation 13)... 

Similarly, partially fluorinated and perfluorinated methylenecyclopropanes [57, 52], cyclopropenes [55, 84, 55], cyclobutenes [75, 56], and bicychc alkenes [57, 55, 59, 90] apparently denve dienophilic reactivity from relief of their ground-state strain during reaction Thus 2,2-difluoromethylenecyclopropane and perfluoromethylenecyclopropane undergo exclusive [244] cycloadditions [57, 52] (equations 72 and 73), whereas (difluoromethylene)cyclopropane undergoes only [24-2] cycloadditions [57]... 

Hexafluoroacetone and certain perfluorinated or partially fluorinated ketones, aldehydes, and imines react with a-functionalized carboxylic acids (e.g., a-amino, a-At-methylamino [S3, 84], a-hydroxy [S5], and a-mercapto [Sd] acids) to give five-membered heterocyclic systems (equation 13). 

Perfluorinated and partially fluorinated substituents directly bonded to hetero multiple bond systems lower the energies of FMOs Consequently, they are highly reactive in H0MO (l,3-dipole)-LUMO (dipolarophile)-controlled [3+2] cycload-... 

Polyfluoroalkyl- andperfluoroalkyl-substituted CO and CN multiple bonds as dipolarophiles. Dmzo alkanes are well known to react with carbonyl compounds, usually under very mild conditions, to give oxiranes and ketones The reaction has been interpreted as a nucleophilic attack of the diazo alkane on the carbonyl group to yield diazonium betaines or 1,2,3 oxadiazol 2 ines as reaction intermediates, which generally are too unstable to be isolated Aromatic diazo compounds react readily with partially fluorinated and perfluorinated ketones to give l,3,4-oxadiazol-3-ines m high yield At 25 °C and above, the aryloxa-diazolines lose nitrogen to give epoxides [111]... 

Certain trifluoromethyl-substituted 1,2,4,5 tetrazines [260, 26i] and 1,2,4 triazines [i06] can be used as cyclic hetero-1,3-dienes and provide efficient preparative routes to partially fluorinated heterocycles (equations 55 and 56)... 

Photochemical isomerization of partially fluorinated benzenes also leads to relatively stable Dewar isomers [164, 265], however, at elevated temperatures, they rearrange to benzene derivatives [166]... 

Consistent with this, dissolution of KF increases the conductivity and KIFe can be isolated on removal of the solvent. Likewise NOF affords [NO]+[IF6] . Antimony compounds yield ISbFio, i-2. [IF4]+[SbF6], which can be titrated with KSbFfi. However, the milder fluorinating power of IF5 frequently enables partially fluorinated adducts to be isolated and in some of these the iodine is partly oxygenated. Complete structural identification of the products has not yet been established in all cases but typical stoichiometries are as follows ... 

Electrochemical fluorination is an important technique for obtaining saturated perfluoroheterocycles. Incorporation of a partially fluorinated group into hydrocarbon ethers enhances their stability toward fluorination with CoF3 and this approach has been extended toward electrochemical fluorination [89MI1 90JFC(49)409]. Adduct (6) obtained by free radical... 

High-valency metal fluoride fluorination of pyridine [82JFC(21)171], quinoline [82JFC(21)413], and 2-methylfurans [91 JFC(51)179] has been reported. With 2-methylfuran a complex mixture of stereoisomers of partially fluorinated oxolans was obtained. These can be dehydrofluorinated to fluorooxolens and no furans have been observed. Conformation and structural group were found to influence the direction and readiness toward dehydrofluorination [91 JFC(52) 165]. 

The reaction of tetramethylsilane with fluorine led to the isolation of several, partially fluorine-substituted tetramethylsilanes (see Tables VII-IX), and preservation of over 80% of the silicon-carbon bonds in the initial, tetramethylsilane reactant. The stability of many of the partially fluorinated germanes and silanes (some are stable to over 100°C) is very surprising, for the possibility of elimination of hydrogen fluoride is obvious. Indeed, before the first reported synthesis (12) of... 

Partially fluorinated cryptands were synthesized from l,3-f>fs(bromomethyl)-2-fluorobenzene and diaza-18-crown-6 or benzodiaza-18-crown-6 in good yields these ligands formed very stable Ag(I) complexes <96CB1211>. 

Partially fluorinated X-IP has been used for a number of years as an additive in the inert lubricant PFPE film on the surface of a magnetic hard disk to enhance start/stop durability of PFPE lubricants [29,30]. Recently it has been used as a vapor lubricated film on the surface of the disks [31 ]. In order to avoid the PFPE being catalyzed to decomposition by the slider material AI2O3 (refer to Section 3.4), XI -P was also examined as a protective film on the surface of the magnetic heads [25,32]. The results of CSS tests indicate that the thermal stability of the lubricant was greatly improved in the presence of X-1P, and the thickness of X-1P film on the slider surface has an important influence on HDD lubrication properties. 

A kinetic study of the hydrodefluorination of C F H in the presence of EtjSiH indicated a first-order dependence on both [fluoroarene] and [ruthenium precursor] and a zero-order dependence on the concentration of alkylsilane, implying that the rate-limiting step in the catalytic cycle involves activation of the fluoroarene. The regioselectivity for hydrodefluorination of partially fluorinated substrates such as CgFjH has been accounted for by an initial C-H bond activation as shown in the... 

---