Poly polyol

PLASTEC Plastics Technical Evaluation Center POLY polyol... 

Bruggeman, J.P., de Bruin, B.J., Bettinger, C.J., Langer, R., 2008. Biodegradable poly(polyol sebacate) polymers. Biomaterials 29, 4726-4735. 

Commonly used isocyanates are toluene dhsocyanate, methylene diphenyl isocyanate, and polymeric isocyanates. Polyols used are macroglycols based on either polyester or polyether. The former [poly(ethylene phthalate) or poly(ethylene 1,6-hexanedioate)] have hydroxyl groups that are free to react with the isocyanate. Most flexible foam is made from 80/20 toluene dhsocyanate (which refers to the ratio of 2,4-toluene dhsocyanate to 2,6-toluene dhsocyanate). High-resilience foam contains about 80% 80/20 toluene dhsocyanate and 20% poly(methylene diphenyl isocyanate), while semi-flexible foam is almost always 100% poly(methylene diphenyl isocyanate). Much of the latter reacts by trimerization to form isocyanurate rings. 

HydroxyethyUiydrazine (11) is a plant growth regulator. It is also used to make a coccidiostat, furazoHdone, and has been proposed, as has (14), as a stabilizer in the polymerization of acrylonitrile (72,73). With excess epoxide, polysubstitution occurs and polyol chains can form to give poly(hydroxyaLkyl) hydrazines which have been patented for the preparation of cellular polyurethanes (74) and as corrosion inhibitors for hydrauHc fluids (qv) (75). DialkyUiydrazines, R2NNH2, and alkylene oxides form the very reactive amineimines (15) which react further with esters to yield aminimides (16) ... 

Synthetic oils have been classified by ASTM into synthetic hydrocarbons, organic esters, others, and blends. Synthetic oils may contain the following compounds diaLkylben2enes, poly(a-olefins) polyisobutylene, cycloaUphatics, dibasic acid esters, polyol esters, phosphate esters, siUcate esters, polyglycols, polyphenyl ethers, siUcones, chlorofluorocarbon polymers, and perfluoroalkyl polyethers. 

MggAl2(OH) gC03 -4 H2O, is used to polymerize PO and is activated by calcining at 450°C, a quantitative yield of PPO is obtained at 50°C in 2 hours (96). At Olin, POLY-L polyols have been produced with reduced unsaturation, but the catalyst used to produce them has not been disclosed (97). The use of zinc hexacyanocolbaltate to prepare low unsaturation polyols has been reported (98). 

Propylene oxide has found use in the preparation of polyether polyols from recycled poly(ethylene terephthalate) (264), haUde removal from amine salts via halohydrin formation (265), preparation of flame retardants (266), alkoxylation of amines (267,268), modification of catalysts (269), and preparation of cellulose ethers (270,271). 

Reaction of olefin oxides (epoxides) to produce poly(oxyalkylene) ether derivatives is the etherification of polyols of greatest commercial importance. Epoxides used include ethylene oxide, propylene oxide, and epichl orohydrin. The products of oxyalkylation have the same number of hydroxyl groups per mole as the starting polyol. Examples include the poly(oxypropylene) ethers of sorbitol (130) and lactitol (131), usually formed in the presence of an alkaline catalyst such as potassium hydroxide. Reaction of epichl orohydrin and isosorbide leads to the bisglycidyl ether (132). A polysubstituted carboxyethyl ether of mannitol has been obtained by the interaction of mannitol with acrylonitrile followed by hydrolysis of the intermediate cyanoethyl ether (133). 

Polymerization Solvent. Sulfolane can be used alone or in combination with a cosolvent as a polymerization solvent for polyureas, polysulfones, polysUoxanes, polyether polyols, polybenzimidazoles, polyphenylene ethers, poly(l,4-benzamide) (poly(imino-l,4-phenylenecarbonyl)), sUylated poly(amides), poly(arylene ether ketones), polythioamides, and poly(vinylnaphthalene/fumaronitrile) initiated by laser (134—144). Advantages of using sulfolane as a polymerization solvent include increased polymerization rate, ease of polymer purification, better solubilizing characteristics, and improved thermal stabUity. The increased polymerization rate has been attributed not only to an increase in the reaction temperature because of the higher boiling point of sulfolane, but also to a decrease in the activation energy of polymerization as a result of the contribution from the sulfonic group of the solvent. 

Poly(Oxyethylene-coOxypropylene) Nonionic Surfactants. A great variety of these surfactants is marketed by BASE Corporation under the Pluronic polyol trademark. The synthesis foUows ... 

Polyurethane foams are formed by reaction with glycerol with poly(propylene oxide), sometimes capped with poly(ethylene oxide) groups with a reaction product of trimethylolpropane and propylene oxide or with other appropriate polyols. A typical reaction sequence is shown below, in which HO—R—OH represents the diol. If a triol is used, a cross-linked product is obtained. 

Polyether Polyols. Polyether polyols are addition products derived from cyclic ethers (Table 4). The alkylene oxide polymerisation is usually initiated by alkah hydroxides, especially potassium hydroxide. In the base-catalysed polymerisation of propylene oxide, some rearrangement occurs to give aHyl alcohol. Further reaction of aHyl alcohol with propylene oxide produces a monofunctional alcohol. Therefore, polyether polyols derived from propylene oxide are not truly diftmctional. By using sine hexacyano cobaltate as catalyst, a more diftmctional polyol is obtained (20). Olin has introduced the diftmctional polyether polyols under the trade name POLY-L. Trichlorobutylene oxide-derived polyether polyols are useful as reactive fire retardants. Poly(tetramethylene glycol) (PTMG) is produced in the acid-catalysed homopolymerisation of tetrahydrofuran. Copolymers derived from tetrahydrofuran and ethylene oxide are also produced. 

Polyester Polyols. Initially polyester polyols were the preferred raw materials for polyurethanes, but in the 1990s the less expensive polyether polyols dominate the polyurethane market. Inexpensive aromatic polyester polyols have been introduced for rigid foam appHcations. These are obtained from residues of terephthaHc acid production or by transesterification of dimethyl terephthalate (DMT) or poly(ethylene terephthalate) (PET) scrap with glycols. 

In addition, polyester polyols are made by the reaction of caprolactone with diols. Poly(caprolactone diols) are used in the manufacture of thermoplastic polyurethane elastomers with improved hydrolytic stabiHty (22). The hydrolytic stabiHty of the poly(caprolactone diol)-derived TPUs is comparable to TPUs based on the more expensive long-chain diol adipates (23). Polyether/polyester polyol hybrids are synthesized from low molecular weight polyester diols, which are extended with propylene oxide. 

Poly(vinyl alcohol) used to manufacture the poly(vinyl acetal)s is made from poly(vinyl acetate) homopolymer (see Vinyl polymers, vinyl alcohol polymers Vinyl POLYMERS, vinyl acetate polymers). Hydrolysis of poly(vinyl acetate) homopolymer produces a polyol with predominandy 1,3-glycol units. The polyol also contains up to 2 wt % 1,2-glycol units that come from head-to-head bonding during the polymeri2ation of vinyl acetate monomer. Poly(vinyl acetate) hydrolysis is seldom complete, and for some appHcations, not desired. For example, commercial PVF resins may contain up to 13 wt % unhydroly2ed poly(vinyl acetate). Residual vinyl acetate units on the polymer help improve resin solubiHty and processibiHty (15). On the other hand, the poly(vinyl alcohol) preferred for commercial PVB resins has less than 3 wt % residual poly(vinyl acetate) units on the polymer chain. 

Miscellaneous Commercial Applications. Dimer acids are components of "downweU" corrosion inhibitors for oil-drilling equipment (see Petroleum Corrosion and corrosion inhibitors). This may account for 10% of current dimer acid use (71). The acids, alkyl esters, and polyoxyalkylene dimer esters are used commercially as components of metal-working lubricants (see Lubrication). Dimer esters have achieved some use in specialty lubricant appHcations such as gear oils and compressor lubricants. The dimer esters, compared to dibasic acid esters, polyol esters and poly(a-olefin)s, are higher in cost and of higher viscosity. The higher viscosity, however, is an advantage in some specialties, and the dimer esters are very stable thermally and can be made quite oxidatively stable by choice of proper additives. 

Surface-Active Agents. Polyol (eg, glycerol, sorbitol, sucrose, and propylene glycol) or poly(ethylene oxide) esters of long-chain fatty acids are nonionic surfactants (qv) used in foods, pharmaceuticals, cosmetics, textiles, cleaning compounds, and many other appHcations (103,104). Those that are most widely used are included in Table 3. 

Nonionic Surface-Active Agents. Approximately 14% of the ethyleae oxide consumed ia the United States is used in the manufacture of nonionic surfactants. These are derived by addition of ethylene oxide to fatty alcohols, alkylphenols (qv), tall oil, alkyl mercaptans, and various polyols such as poly(propylene glycol), sorbitol, mannitol, and cellulose. They are used in household detergent formulations, industrial surfactant appHcations, in emulsion polymeri2ation, textiles, paper manufacturing and recycling, and for many other appHcations (281). 

Poly(tetramethylene oxide) polyols (PTMEG) are high performance polyethers that are crystalline waxes at molecular weights above 650 and liquids at lower molecular weights. They are only available as diols, but they produce adhesives with good hydrolysis resistance and moisture resistance, which is why these adhesives are even used in medical devices, blood bags, catheters, and heart-assist devices [25]. Certain thermoplastic polyurethane adhesives and solvent-borne adhesives are also based on PTMEG s. 

The specialty class of polyols includes poly(butadiene) and polycarbonate polyols. The poly(butadiene) polyols most commonly used in urethane adhesives have functionalities from 1.8 to 2.3 and contain the three isomers (x, y and z) shown in Table 2. Newer variants of poly(butadiene) polyols include a 90% 1,2 product, as well as hydrogenated versions, which produce a saturated hydrocarbon chain [28]. Poly(butadiene) polyols have an all-hydrocarbon backbone, producing a relatively low surface energy material, outstanding moisture resistance, and low vapor transmission values. Aromatic polycarbonate polyols are solids at room temperature. Aliphatic polycarbonate polyols are viscous liquids and are used to obtain adhesion to polar substrates, yet these polyols have better hydrolysis properties than do most polyesters. 

The most common non-crystallizing soft segment in urethane adhesives is based on poly(oxypropylene) polyols, shown in Table 2. Most non-crystalline soft... 

---