Poly ether polyols synthesis

Synthesis of High Molecular Weight Poly ether Polyols. .. 

A very interesting catalyst used in the synthesis of polyether polyols for rigid PU foams is urea [41]. Sucrose poly ether polyols obtained in the presence of urea as catalyst have a very light colour [41]. Unfortunately with urea it is possible to obtain lower molecular weight polyether polyols, with an hydroxyl number (OH ) higher than 500 mg KOH/g. 

Polyether-PA segmented copolymers, synthesizing, 191-192 Polyether polyols, 200, 205, 211-212 synthesis of, 223, 224 Poly(ether sulfone) (PES), 327. See also Poly(arylene ether sulfone)s Poly(phenylene ether sulfone) chains Sulfonated poly (ary lene ether sulfone)... 

Figure 4.30 Scheme for polyether polyol fabrication by anionic polymerisation of alkylene oxides, initiated by glycerol or diols (variant). 1 - Reactor for potassium glycerolate synthesis 2 - Reactor for prepolyether synthesis 3 - Reactor for polyether synthesis 4 - Reactor for purification 5 - Filter press 6 - Storage tank for final purified poly ether 7 - Heat exchangers for removal of the reaction heat 8 - Condensers 9 - Vacuum pumps 10 - Vessels for distilled water 11 - Recirculation pumps 12 - Gear pump or screw (or double screw) pump... 

Poly(tetramethylene oxide) polyols (see Scheme 4.4) are a special class of polyethers syndiesized via acid-catalyzed ring-opening polymerization of tetrahy-drofuran. Although less susceptible to side reactions, the synthesis of these C4 ethers is less flexible in terms of product composition and structure. Thus, because of diis syndietic route, only two-functional glycols are available and copolymers are not readily available. Molecular weights of commercial C4 glycols range up to about 3000 g/m. 

A variety of poly/dihydric oils are used for the preparation of glyddyl ether-type epoxy resins. These include bisphenols, namely bisphenol-A (BPA), bisphenol-F (BPF), bisphenol-S (BPS) and bisphenol-H (BPH) and so on. Other aromatic diols and polyols such as phenolic resin, MF resins and hyperbranched polyol may also be used in the preparation of vegetable oil-based epoxy resins. Bisphenol-A (2,2-bis(4-hydroxyphenyl)propane) is one of the most widely used aromatic diols for the synthesis of epoxy resin. The resins are commonly used as lacquers for coated metal products such as food cans, bottle tops and water pipes. There are also reports on the use of bisphenol-S (BPS) (bis(4-hydroxyphenyl) sulphone), in the synthesis of epoxy resin. The advantages of resistance to deformation by heat and improvement of thermal stability were observed for such epoxy resins. The presence of sulphone group (BPS-based epoxy resin) in the epoxy resin exhibits better gel time than BPA-based epoxy. Another important diol, namely bis(4-hydroxydiphenyl)methane or bisphenol-F (BPF) is used for the synthesis of low viscosity epoxy resins. BPF generally comprises several isomers such as bis(2-hydroxylphenyl)methane (i.e. ortho-ortho isomer), bis(4-hydroxylphenyl)methane (i.e. para-para isomer) and... 

---