Olefins characterized

Bed residence time effects can also be described by the convective terms included in the olefin readsorption model [Eqs. (13) and (14)]. Convection-limited removal of a-olefins, characterized by the Peclet number, accounts... 

These three technologies differ from one another in their operating conditions, number of process steps, and catalyst of choice and therefore they give rise to blends of olefins characterized by a different C-chain length distribution and, to some extent, also the C-chain structure. 

Nevertheless, this type of analysis, usually done by chromatography, is not always justified when taking into account the operator s time. Other quicker analyses are used such as FIA (Fluorescent Indicator Analysis) (see paragraph 3.3.5), which give approximate but usually acceptable proportions of saturated, olefinic, and aromatic hydrocarbons. Another way to characterize the aromatic content is to use the solvent s aniline point the lowest temperature at which equal volumes of the solvent and pure aniline are miscible. 

Characterization. In many cases, ftir is a timely and cost-effective method to identify and quantify certain functionaHties in a resin molecule. Based on developed correlations, ftir is routinely used as an efficient method for the analysis of resin aromaticity, olefinic content, and other key functional properties. Near infrared spectroscopy is also quickly becoming a useful tool for on-line process and property control. 

Most Kaminsky catalysts contain only one type of active center. They produce ethylene—a-olefin copolymers with uniform compositional distributions and quite narrow MWDs which, at their limit, can be characterized by M.Jratios of about 2.0 and MFR of about 15. These features of the catalysts determine their first appHcations in the specialty resin area, to be used in the synthesis of either uniformly branched VLDPE resins or completely amorphous PE plastomers. Kaminsky catalysts have been gradually replacing Ziegler catalysts in the manufacture of certain commodity LLDPE products. They also faciUtate the copolymerization of ethylene with cycHc dienes such as cyclopentene and norhornene (33,34). These copolymers are compositionaHy uniform and can be used as LLDPE resins with special properties. Ethylene—norhornene copolymers are resistant to chemicals and heat, have high glass transitions, and very high transparency which makes them suitable for polymer optical fibers (34). 

Analytical and test methods for the characterization of polyethylene and PP are also used for PB, PMP, and polymers of other higher a-olefins. The C-nmr method as well as k and Raman spectroscopic methods are all used to study the chemical stmcture and stereoregularity of polyolefin resins. In industry, polyolefin stereoregularity is usually estimated by the solvent—extraction method similar to that used for isotactic PP. Intrinsic viscosity measurements of dilute solutions in decahn and tetraHn at elevated temperatures can provide the basis for the molecular weight estimation of PB and PMP with the Mark-Houwiok equation, [rj] = KM. The constants K and d for several polyolefins are given in Table 8. 

Higher olefins are versatile chemical intermediates for a number of important industrial and consumer products, providing a better standard of living with low environmental impact (qv) in many commercial uses. These uses can be characterized by carbon number and by chemical stmcture. 

A polysulfone is characterized by the presence of the sulfone group as part of its repeating unit. Polysulfones may be aUphatic or aromatic. AUphatic polysulfones (R and are alkyl groups) were synthesized by radical-induced copolymerization of olefins and sulfur dioxide and characterized many years ago. However, they never demonstrated significant practical utiUty due to their relatively unattractive physical properties, not withstanding the low cost of their raw materials (1,2). The polysulfones discussed in this article are those based on an aromatic backbone stmcture. The term polysulfones is used almost exclusively to denote aromatic polysulfones. 

When simple Hquids like naphtha are cracked, it may be possible to determine the feed components by gas chromatography combined with mass spectrometry (gc/ms) (30). However, when gas oil is cracked, complete analysis of the feed may not be possible. Therefore, some simple definitions are used to characterize the feed. When available, paraffins, olefins, naphthenes, and aromatics (PONA) content serves as a key property. When PONA is not available, the Bureau of Mines Correlation Index (BMCI) is used. Other properties like specific gravity, ASTM distillation, viscosity, refractive index. Conradson Carbon, and Bromine Number are also used to characterize the feed. In recent years even nuclear magnetic resonance spectroscopy has been... 

The product from fluonnation of sodium acetate is acetyl hypofluorite [64], which IS isolated and characterized [65] The value of this reagent lies in its relative mildness, because it reacts cleanly with most olefins adding the elements of acetoxyl and fluorine [66] Tnfluoroacetyl hypofluorite adds cleanly only to benzylic or electron-rich double bonds... 

Anhydrous ammonia adds tofluorooleftns to produce nitriles Tins phenomenon IS used to characterize chemically the terminal difluoromethylene olefin that IS claimed to be m equilibrium with the internal isomer [4] (equation 2) Thus isomerization to the terminally unsaturated isomer prior to attack by ammonia yields the cyanoenamine... 

The Nenitzescu process is presumed to involve an internal oxidation-reduction sequence. Since electron transfer processes, characterized by deep burgundy colored reaction mixtures, may be an important mechanistic aspect, the outcome should be sensitive to the reaction medium. Many solvents have been employed in the Nenitzescu reaction including acetone, methanol, ethanol, benzene, methylene chloride, chloroform, and ethylene chloride however, acetic acid and nitromethane are the most effective solvents for the process. The utility of acetic acid is likely the result of its ability to isomerize the olefinic intermediate (9) to the isomeric (10) capable of providing 5-hydroxyindole derivatives. The reaction of benzoquinone 4 with ethyl 3-aminocinnamate 35 illustrates this effect. ... 

The physico-mechanical, thermal, and adhesion properties of the synthesized polyfunctional PSs are dependent on the nature of functional groups in the aromatic ring. In this case, the following are properties of the chlorohydrin and epoxy groups highest elasticity, resistance to strike, and adhesion properties with carboxyl and olefinics. Furthermore, the—CO—CH=CH-—COOH group was provided new properties such as the photosensitive capability. Functionalized PSs obtained are characterized by their high thermostability, adhesion, and photosensitivity. 

The most important olefins used for the production of petrochemicals are ethylene, propylene, the butylenes, and isoprene. These olefins are usually coproduced with ethylene by steam cracking ethane, LPG, liquid petroleum fractions, and residues. Olefins are characterized by their higher reactivities compared to paraffinic hydrocarbons. They can easily react with inexpensive reagents such as water, oxygen, hydrochloric acid, and chlorine to form valuable chemicals. Olefins can even add to themselves to produce important polymers such as polyethylene and polypropylene. Ethylene is the most important olefin for producing petrochemicals, and therefore, many sources have been sought for its production. The following discusses briefly, the properties of these olefmic intermediates. 

Naphtha from atmospheric distillation is characterized by an absence of olefinic compounds. Its main constituents are straight and branched-chain paraffins, cycloparaffms (naphthenes), and aromatics, and the ratios of these components are mainly a function of the crude origin. 

Products from coking processes vary considerably with feed type and process conditions. These products are hydrocarbon gases, cracked naphtha, middle distillates, and coke. The gas and liquid products are characterized by a high percentage of unsaturation. Hydrotreatment is usually required to saturate olefinic compounds and to desulfurize products from coking units. 

In contrast to the 1,4-dithiocin system, 1,4-dioxocin (1) is well-known and has been characterized as an olefinic compound by its spectra as well as its chemical behavior.5-6 The reason why 1,4-dioxocin in contrast to 1.4-dihydro-1.4-diazocine (see Section 1.4.) and 4//-l,4-oxazocinc (sec Section 1.12.), does not qualify as a 107r-aromatic species, is the less pronounced tendency of oxygen atoms for 7t-electron delocalization. An X-ray analysis of the 6-substituted 1,4-dioxocin 2 confirms the presumed nonplanar conformation of the 1,4-dioxocin structural element.9 The eight-membered ring exhibits a twisted boat-chair confirmation. 

Oxonin (1, X = O) has polyenic character, is heavily buckled and is thermally rather unstable. Azonines 1 (X = NR) incorporating electron-withdrawing groups R on nitrogen are also uniformly characterized as olefinic compounds They are thermally labile and are decidedly atropic according to their spectroscopic data. 

Rodriguez and Gandini139,14° have recently carried out some work on the structure of the soluble polymers of the two ketones. The purified monomers were polymerized with various acids to give dark soluble products with DP s of 10—20. The ultraviolet, infrared, and NMR spectra and the elemental analysis of these purified substances were compared with those of the starting monomers. It was concluded that, at least for this initial phase, the two systems are characterized by polymerization through the olefinic bond because ... 

Unfortunately, at present the information characterizing the properties of the active bond in polymerization catalysts is very scant. The analogy between the features of the active bonds in the propagation centers and those of the transition metal-carbon bond in individual organometallic compounds is sure to exist, but as in the initial form the latter do not show catalytic activity in olefin polymerization this analogy is restricted to its limits. 

The mechanism of the polymerization contains ionic intermediate steps. The free H+ goes to a carbenium ion and, as shown in route B, rearranges to form tetrapropylene. It is highly likely that this actual tetrapropylene exists only in very small concentrations. The product variety is explained by the rearrangement of the carbenium ion to dodecene isomers according to route C. In addition, short-chain olefins formed by fragmentation (route D). Polymerization proceeds at almost 100% to mono olefins. Aromatics, paraffins, and diolefins exist only in trace amounts. The propylene tetramer is best characterized by its distillation range. 

Studies to clarify the earlier poor conversion of 10 into IOS have also been published by Yoshimura et al. [22,23]. These authors have made extensive use of NMR to characterize the main components of the sulfonated intermediates of internal olefins. By keeping the neutralization temperature below 35°C, internal olefins were converted to sulfonates with the same yield as that of a-olefins. 

Jones and Vogel investigated the snbstitnent effect of a 5,6-bis(methoxycarbonyl) group in bicyclo[2.2.2]octene (48i) [117]. The substituent effect of a single 5-exo substituent on the facial selectivities of bicyclo[2.2.2]octenes 48b-48h was also characterized by our group [118]. Epoxidation and dihydroxylation of the olefin moiety of 5-exo-substituted... 

Diels-Alder cycloadditions involving norbomene 57 [34], benzonorbomene (83), 7-isopropylidenenorbomadiene and 7-isopropylidenebenzonorbomadiene (84) as dienophiles are characterized as inverse-electron-demand Diels-Alder reactions [161,162], These compounds react with electron-deficient dienes, such as tropone. In the inverse-electron-demand Diels-Alder reaction, orbital interaction between the HOMO of the dienophile and the LUMO of the diene is important. Thus, orbital unsymmetrization of the olefin it orbital of norbomene (57) is assumed to be involved in these top selectivities in the Diels-Alder cycloaddition. 

Blend with Isotactic Polypropylene and Thermoplastic Olefin—Theory AND Characterization... 

Several studies characterizing the reactions of alkenyl radicals with quinone dumines and quino-neimines were published in the late 1970s. Quinone dumines react with allylic radicals yielding both the reduced PPD and the alkylated product. In these experiments 2-methyl-2-pentene served as a model olefin (model for NR). Samples of the olefin and quinoneimines or quinone diimine were heated to 140°C. Isolation and analysis of products demonstrated that 40%-70% of the imine or diimine was reduced to the corresponding PPD, while 20%-50% was isolated as the alkylated product. This alkylation reaction (via an allylic radical) represents the pathway to the formation of rubber-bound antidegradant. ... 

---