Occupational Safety and Health Administration regulations

Occupational Safety and Health Administration regulations as they relate to (a) safety of design related to injury to personnel (includes such matters as latest vessel design [53], noise level from operating equipment, etc., [20, 21, 22, 23, 24, 25, 26, 27, 28]. (b) safety of the plant layout emdronment which might influence the safety of the plant facilities. 

Material Safety Data Sheet (MSDS) A document, required by OSHA (U.S. Occupational Safety and Health Administration) regulations, that provides a thorough profile of a potentially hazardous substance or product. The MSDS profile includes recommendations of how to handle the product, as well as how to treat a person who swallows the product, gets the product in the eyes or is otherwise overexposed. Manufacturers of such products, such as cleansers, solvents and coatings, provide these MSDS sheets at no cost to customers and end users. 

The Occupational Safety and Health Administration regulates chlorambucil under the Hazard Communication Standard and as a chemical hazard in laboratories, although there is no specific occupational exposure standard for the chemical. The Food and Drug Administration regulates clinical use of the drug and labeling requirements under the Food, Drug, and Cosmetic Act. 

There is no occupational standard for perchlorate but the Occupational Safety and Health Administration regulates perchlorate as a nuisance dust, with an 8h time-weighted average permissible exposure limit of 15mgm. Studies have demonstrated that occupational exposures to perchlorate have not been hazardous to the health of workers at manufacturing plants. 

US Department of Labor. Occupational Safety and Health Administration. Regulations (standards - 29 CFR) Hazardous Waste Operations and Emergency Response. 1910.120 Washington, DC 2002 http //www.osha.gov/pls/oshaweb/owadisp.show document7p table = STANDARDS p id = 9765. Last accessed 4/15/06... 

The company incurred 50 eye injuries in FY 1996 with a workers compensation cost of 200,000. The frequency of eye injuries escalated in FY 1997 to 85 injuries at an estimated cost of 400,000. Additionally, the 6 percent increase in workers compensation benefits passed by the legislature in FY 1997 takes effect in January 1998, and the Occupational Safety and Health Administration regulations require this program. 

A device used in sawmills to serve as a warning for overhead objects, as stated in Occupational Safety and Health Administration regulation 29 CFR 1910.265 (b) (43). Tempered Glass... 

Faulkner BC, Drake DB, Gear AJ, et al. (1997) Molten metal burns further evidence of industrial foundries failure to comply with Occupational Safety and Health Administration regulations. Emerg Med 15 675-677... 

In the United States, Occupational Safety and Health Administration regulations (under 29 CFR Part 1910.120) require that first responders be trained in the use of the North American Emergency Response Guidebook. 

Occupation Safety and Health Administration Standards and Regulations of U.S. Gopemment, U.S. Government Printing Office, Washington, D.C., 1990. 

For chemical faciUties in the United States, hazard analysis is not an option if inventories of hazardous chemicals are maintained in amounts greater than the threshold quantities specified by the Occupational Safety and Health Administration (OSHA) regulation 1910.119. Many faciUties are finding that hazard analysis has many benefits. The process or procedure often works better, the quaUty of the product is improved, the process experiences less down time, and the employees feel more comfortable in the work environment after a hazard analysis has been completed. 

The Occupational Safety and Health Administration (OSHA) regulates the exposure to chemicals ia the workplace. From the poiat of view of the inorganic pigments iadustry, the limits estabUshed for lead and cadmium exposure are particularly important. A comprehensive lead standard adopted by OSHA ia 1978 has been successful ia reduciag the potential for lead contamination ia the workplace. 

Code of Federal Regulations, Tide 29, part 1910.1200, OSHA Hazard Communication Standard, Occupational Safety and Health Administration, Washington, D.C. 

Process Safety Management of Highly Hazardous Chemicals Tide 29, Subtitie B, Chapt. XVII, Part 1910, Subpart H, Paragraph 119, of the Code ofFederal Regulations (29 CER 1910.119), FederalRegisterhl >()) 6403, U.S. Department of Labor, Occupational Safety and Health Administration (Feb. 24, 1992). 

The handling of arsenic in the workplace should be in compliance with the Occupational Safety and Health Administration (OSHA) regulations the maximum permissible exposure limit for arsenic in the workplace is 10 p-g/m of air as deterrnined as an average over an 8-h period (33). 

A leader in applying PSA to other parts of the chemical process industry has been the AlChf. s Center for Chemical Process Safety. A major difference between PSA for nuclear power and PSA for chemical processing has been the lack of government regulations that require risk analysis for chemical processes. A primary impetuous has been the Occupational Safety and Health Administration s (OSHA) PSM rule that defines the application of PSA to the chemical industry for ihc proteciion of the public and workers. In addition, the Environmental Protection Agcrii, . (EPA) regulates waste disposal. 

The Occupational Safety and Health Administration s regulation 29CFR1910.119 provides a regulatory framework for process safety management. This regulation applies to facilities handling a spedfied list of chemicals above indicated threshold quantities. 

The Occupational Safety and Health Act (OSH Act) was enacted by Congress in 1970 and established tlie Occupational Safety and Health Administration (OSHA), which addressed safety in tlie workplace. At tlie same time tlie USEPA was created. Both USEPA and OSHA are mandated to reduce tlie exposure of Itazardous substances over Umd, sea, and air. Tlie OSH Act is limited to conditions that exist in the workplace, where its jurisdiction covers both safety and health. Frequently, both agencies regulate tlie same substances but in a different manner as they are overlapping environmental organizations. 

Occupational Safety and Health Administration (OSHA) Regulations Environmental Protection Agency (EPA Regulatory secdon)... 

All toxic materials were disposed of in accordance with the policy of UTMDACC to handle and dispose of hazardous waste, which is in accordance with the regulations of the Environmental Protection Agency, Occupational Safety and Health Administration, Federal Department of Transportation, Texas Department of Health, and the Texas Water Commission. 

The federal government develops regulations and recommendations to protect public health. Regulations can be enforced by law. Federal agencies that develop regulations for toxic substances include the Environmental Protection Agency (EPA), the Occupational Safety and Health Administration (OSHA), and the Food and Drug Administration (FDA). 

Trichloroethylene levels in the workplace are regulated by the Occupational Safety and Health Administration (OSHA). The occupational exposure limit for an 8-hour workday, 40-hour workweek, is an average concentration of 100 ppm in air. The 15-minute average exposure in air that should not be exceeded at any time during a workday is 300 ppm. The OSHA standards are based on preventing central nervous system effects after trichloroethylene exposure. For more information, see Chapter 7. 

---