9-Methyl- Methylene chloride

Benzyl-methyl-methylen- -chlorid E14a/3, 214/216 (R2N-CH2-OR/HCl A bzw. SOCl2)... 

Solvent effects Birch reduction. 1,2-Dimethoxyethane (Glyme) and Dimethyl ether (see Naphthalene-Sodium), Dimethylformamide. Dimethyl sulfone. Dimethyl sulfoxide. Diphenyl sulfoxide. Ethylene glycol. N-EthylmorphoUne. Hexamethylphosphoric triamide. Methylal. Methylene chloride. Methyl ethyl ketone. N-Methyl-2-pyrrolidone. Nitrometbane. Nitrosyl chloride. Phenetole. Tetrahydrofurane. Tetramethylene sulfone. Tetramethylene sulfoxide. Triethanolamine. Triethyl phosphate. Trifluoroacetic acid,... 

Methylene chloride. Dichloroethylene (trans) Ethylideiie chloride Dichloroethylene (ci ) Chloroform 2 2 Dichloropropane Methyl chloroform. ... 

CeUulose triacetate is insoluble in acetone, and other solvent systems are used for dry extmsion, such as chlorinated hydrocarbons (eg, methylene chloride), methyl acetate, acetic acid, dimethylformamide, and dimethyl sulfoxide. Methylene chloride containing 5—15% methanol or ethanol is most often employed. Concerns with the oral toxicity of methylene chloride have led to the recent termination of the only triacetate fiber preparation faciHty in the United States, although manufacture stiH exists elsewhere in the world (49). 

Alkoxyall l Hydroperoxides. These compounds (1, X = OR , R = H) have been prepared by the ozonization of certain unsaturated compounds in alcohol solvents (10,125,126). 2-Methoxy-2-hydroperoxypropane [10027-74 ] (1, X = OR , R" = methyl), has been generated in methanol solution and spectral data obtained (127). A rapid exothermic decomposition upon concentration of this peroxide in a methylene chloride—methanol solution at 0°C has been reported (128). 2-Bromo-l-methoxy-l-methylethylhydroperoxide [98821-14-8]has been distilled (bp 60°C (bath temp.), 0.013 kPa) (129). Two cycHc alkoxyaLkyl hydroperoxides from cyclodecanone have been reported (1, where X = OR R, R = 5-oxo-l, 9-nonanediyl) with mp 94—95°C (R" = methyl) and mp 66—68°C (R" = ethyl) (130). Like other hydroperoxides, alkoxyaLkyl hydroperoxides can be acylated or alkylated (130,131). 

Solvent Treatment. Solvent processes can be divided into two main categories, solvent extraction and solvent dewaxing. The solvent used in the extraction processes include propane and cresyHc acid, 2,2 -dichlorodiethyl ether, phenol (qv), furfural, sulfur dioxide, benzene, and nitrobenzene. In the dewaxing process (28), the principal solvents are benzene, methyl ethyl ketone, methyl isobutyl ketone, propane, petroleum naphtha, ethylene dichloride, methylene chloride, sulfur dioxide, and iV-methylpyrroHdinone. 

Fig. 5. Effects of product recycle on methane chlorination product distributions where 1 = methyl chloride, 2 = methylene chloride, 3 = chlorine, and...

Other, removable cation-stabilizing auxiliaries have been investigated for polyene cyclizations. For example, a sdyl-assisted carbocation cyclization has been used in an efficient total synthesis of lanosterol. The key step, treatment of (257) with methyl aluminum chloride in methylene chloride at —78° C, followed by acylation and chromatographic separation, affords (258) in 55% yield (two steps). When this cyclization was attempted on similar compounds that did not contain the C7P-silicon substituent, no tetracycHc products were observed. Steroid (258) is converted to lanosterol (77) in three additional chemical steps (225). 

Chlorinated by-products of ethylene oxychlorination typically include 1,1,2-trichloroethane chloral [75-87-6] (trichloroacetaldehyde) trichloroethylene [7901-6]-, 1,1-dichloroethane cis- and /n j -l,2-dichloroethylenes [156-59-2 and 156-60-5]-, 1,1-dichloroethylene [75-35-4] (vinyhdene chloride) 2-chloroethanol [107-07-3]-, ethyl chloride vinyl chloride mono-, di-, tri-, and tetrachloromethanes (methyl chloride [74-87-3], methylene chloride [75-09-2], chloroform, and carbon tetrachloride [56-23-5])-, and higher boiling compounds. The production of these compounds should be minimized to lower raw material costs, lessen the task of EDC purification, prevent fouling in the pyrolysis reactor, and minimize by-product handling and disposal. Of particular concern is chloral, because it polymerizes in the presence of strong acids. Chloral must be removed to prevent the formation of soflds which can foul and clog operating lines and controls (78). 

Chlorination of various hydrocarbon feedstocks produces many usehil chlorinated solvents, intermediates, and chemical products. The chlorinated derivatives provide a primary method of upgrading the value of industrial chlorine. The principal chlorinated hydrocarbons produced industrially include chloromethane (methyl chloride), dichloromethane (methylene chloride), trichloromethane (chloroform), tetrachloromethane (carbon tetrachloride), chloroethene (vinyl chloride monomer, VCM), 1,1-dichloroethene (vinylidene chloride), 1,1,2-trichloroethene (trichloroethylene), 1,1,2,2-tetrachloroethene (perchloroethylene), mono- and dichloroben2enes, 1,1,1-trichloroethane (methyl chloroform), 1,1,2-trichloroethane, and 1,2-dichloroethane (ethylene dichloride [540-59-0], EDC). 

Chemical initiation generates organic radicals, usually by decomposition of a2o (11) or peroxide compounds (12), to form radicals which then react with chlorine to initiate the radical-chain chlorination reaction (see Initiators). Chlorination of methane yields all four possible chlorinated derivatives methyl chloride, methylene chloride, chloroform, and carbon tetrachloride (13). The reaction proceeds by a radical-chain mechanism, as shown in equations 1 through. Chain initiation... 

The most widely used method of analysis for methyl chloride is gas chromatography. A capillary column medium that does a very good job in separating most chlorinated hydrocarbons is methyl siUcone or methyl (5% phenyl) siUcone. The detector of choice is a flame ionisation detector. Typical molar response factors for the chlorinated methanes are methyl chloride, 2.05 methylene chloride, 2.2 chloroform, 2.8 carbon tetrachloride, 3.1, where methane is defined as having a molar response factor of 2.00. Most two-carbon chlorinated hydrocarbons have a molar response factor of about 1.0 on the same basis. 

The physical properties of methylene chloride are Hsted in Table 1 and the binary a2eotropes in Table 2. Methylene chloride is a volatile Hquid. Although methylene chloride is only slightly soluble in water, it is completely miscible with other grades of chlorinated solvents, diethyl ether, and ethyl alcohol. It dissolves in most other common organic solvents. Methylene chloride is also an excellent solvent for many resins, waxes, and fats, and hence is well suited to a wide variety of industrial uses. Methylene chloride alone exhibits no dash or fire point. However, as Htde as 10 vol % acetone or methyl alcohol is capable of producing a dash point. 

Methylene chloride is easily reduced to methyl chloride and methane by alkaU metal ammonium compounds in Hquid ammonia. When the vapor is contacted with reduced nickel at 200°C in the presence of excess hydrogen, hydrogen chloride and elementary carbon are produced. Heating with alcohoHc ammonia at 100—125°C results in hexamethylenetetramine, (CH2) N4, a heterocycHc compound with aqueous ammonia at 200°C, hydrogen chloride, formic acid, and methylamine are produced. 

Chloroform can be manufactured from a number of starting materials. Methane, methyl chloride, or methylene chloride can be further chlorinated to chloroform, or carbon tetrachloride can be reduced, ie, hydrodechlorinated, to chloroform. Methane can be oxychlorinated with HCl and oxygen to form a mixture of chlorinated methanes. Many compounds containing either the acetyl (CH CO) or CH2CH(OH) group yield chloroform on reaction with chlorine and alkali or hypochlorite. Methyl chloride chlorination is now the most common commercial method of producing chloroform. Many years ago chloroform was almost exclusively produced from acetone or ethyl alcohol by reaction with chlorine and alkali. 

The physical piopeities of ethyl chloiide aie hsted in Table 1. At 0°C, 100 g ethyl chloride dissolve 0.07 g water and 100 g water dissolve 0.447 g ethyl chloride. The solubihty of water in ethyl chloride increases sharply with temperature to 0.36 g/100 g at 50°C. Ethyl chloride dissolves many organic substances, such as fats, oils, resins, and waxes, and it is also a solvent for sulfur and phosphoms. It is miscible with methyl and ethyl alcohols, diethyl ether, ethyl acetate, methylene chloride, chloroform, carbon tetrachloride, and benzene. Butane, ethyl nitrite, and 2-methylbutane each have been reported to form a binary azeotrope with ethyl chloride, but the accuracy of this data is uncertain (1). 

Paprika oleoresin (EEC No. E 160c) is the combination of davor and color principles obtained by extracting paprika with any one or a combination of approved solvents acetone, ethyl alcohol, ethylene dichloride, hexane, isopropyl alcohol, methyl alcohol, methylene chloride, and trichloroethylene. Depending on their source, paprika oleoresins are brown—red, slightly viscous, homogeneous Hquids, pourable at room temperature, and containing 2—5% sediment. 

Cd/Cd compounds carbon tetrachloride chloroform Cr/Cr compounds CN-compounds /HCN Pb/Pb compounds Hg/Hg compounds methylene chloride methyl ethyl ketone methyl isobutyl ketone Ni/Ni compounds tetrachloroethylene toluene... 

Organic chemicals made directly from chlorine include derivatives of methane methyl chloride, methylene chloride, chloroform, carbon tetrachloride, chlorobenzene ortho- and para-dichlorobenzenes ethyl chloride, and ethylene chloride. 

---