Methacrylate acrylonitrile butadiene

MBS = methyl methacrylate—butadiene—styrene and MABS = methacrylate-acrylonitrile—butadiene—styrene. [Pg.503]

ISO 10366-1 2002 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1 Designation system and basis for specifications ISO 10366-2 2003 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2 Preparation of test specimens and determination of properties... [Pg.363]

MABS methyl methacrylate-acrylonitrile-butadiene-styrene... [Pg.404]

MABS polymers (methyl methacrylate-acrylonitrile-butadiene-styrene) together with blends composed of polyphenylene ether and impact-resistant polystyrene (PPE/PS-I) also form part of the styrenic copolymer product range. Figure 2.1 provides an overview of the different classes of products and trade names. A characteristic property is their amorphous nature, i.e. high dimensional stability and largely constant mechanical properties to just below the glass transition temperature, Tg. [Pg.26]

Other Impact-Modified Commercial Grafting-Based Polymers Typical HIPS and ABS polymers are opaque materials however, MABS (methyl methacrylate-acrylonitrile-butadiene-styrene) polymers, which are produced by processes similar to those used in the production of ABS, are transparent materials. This property is obtained by the addition of methyl methacrylate (MMA) to the recipe in order to impart transparency to the polymer by equalizing the refracting index of the rubber particles to that of the matrix. These materials find applications... [Pg.209]

Spadaro, G., Dispenza, G., Me Grail, R, and Valenza, A. 2004. Submicron structured polymethyl methacrylate/acrylonitrile-butadiene rubber blends obtained via gamma radiation induced in situ polymerization. Advances in Polymer Technology 23(3) 211-221. [Pg.173]

PLA has also been blended with other nonbiodegradable polymers, such as poly(methyl methacrylate), acrylonitrile-butadiene-styrene, and Hytrel (from DuPont). Note that some polymers such as PE and PP are not compatible with PLA and cannot be used for compounding, unless special compatibilizers are used. [Pg.338]

Methyl methacrylate-acrylonitrile-butadiene-styrene Methyl methacrylate-butadiene-styrene terpolymer Methyl cellulose... [Pg.368]

Methyl Methacrylate-Acrylonitrile-Butadiene-Styrene (MABS) Polymer... [Pg.48]

Terlux methyl methacrylate—acrylonitrile— butadiene—styrene polymer (MABS) apphcations properties processing. BASF 2003. [Pg.90]

MABS Methyl methacrylate-acrylonitrile—butadiene—styrene... [Pg.532]

Copolymer from methyl methacrylate, acrylonitrile, butadiene, and styrene... [Pg.2162]

Polyamide 6 can be toughened more effectively by blending it with maleated MABS (methacrylate-acrylonitrile-butadiene-styrene copolymer) than with ordinary MABS. [Pg.40]

The stabilization of poly(vinyl chloride) against light has been reviewed by Wirth and Andreas. Detailed mechanistic studies have indicated the importance of peroxides in the process of photo-oxidation. It was suggested that protection could be successfully achieved by exclusion of radiation of A < 380 nm. E.s.r. examination of irradiated samples demonstrated the intervention of peroxides in the mechanisms with the ultimate formation of carbonyl groups which caused chain scission by Norrish cleavage. Photo-oxidation of samples of poly(vinyl chloride) modified by incorporation of acrylonitrile-butadiene-styrene, methyl methacrylate-butadiene-styrene, and methyl methacrylate-acrylonitrile-butadiene-styrene copolymers has been investigated. Discolouration was accelerated by the presence of the modifiers. Thermal pre-treatment accelerated photo-induced decomposition. Mechanical properties were also examined, and scanning electron microscopy showed surface defects due to decomposition of the modifier. ... [Pg.374]

The polyblends show differences amongst themselves. Acrylonitrile-butadiene-styrene (ABS) polyblend is more sensitive to thermal oxidation than methyl methacrylate-butadiene-styrene (MBS) polyblend or methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) polyblend. Consequently, processed ABS photo-oxidises with little or no induction period. [Pg.239]

Methacrylate acrylonitrile butadiene styrene (MABS) copolymer is similar to ABS except for the addition of an additional monomer, usually methyl methacrylate. It is an amorphous, clear, transparent material with the thermal and mechanical properties like those of ABS. The transparency is achieved by matching the refractive indices of the matrix resin... [Pg.78]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...