Other Transition Metals

In daylight or under a tungsten filament lamp, the dialkyltin oligomers (Me2Sn)6, (Ph2Sn)6, and (Et2Sn)9 introduce stannylene units into the Pt-Cl bond of chloroplati-num(II) compounds, for example  

When the stable stannylene [(Me3Si)2CH]2Sn reacts with PtCl2(PEt3)2, one unit inserts into a Pt-Cl bond, while the other acts as a Lewis base, to form the complex (R2Sn)(ClR2Sn)Pt(PEt3)Cl.107 

Too many different types of reaction have been used for generating a bond between tin and a transition metal to permit a simple classification in terms of mechanism or of composition of reactants, but the principal methods involve one of the following processes. Examples of these have already been met in the above sections. 

Some typical examples of products and reactants are shown in Table 19-5. 

Me3Sn-RuCl(CO)(PPh3) Me3SnCH=CH2 + RuHCl(CO)(PPh3)2 hv 118 

---

Pd-cataly2ed reactions of butadiene are different from those catalyzed by other transition metal complexes. Unlike Ni(0) catalysts, neither the well known cyclodimerization nor cyclotrimerization to form COD or CDT[1,2] takes place with Pd(0) catalysts. Pd(0) complexes catalyze two important reactions of conjugated dienes[3,4]. The first type is linear dimerization. The most characteristic and useful reaction of butadiene catalyzed by Pd(0) is dimerization with incorporation of nucleophiles. The bis-rr-allylpalladium complex 3 is believed to be an intermediate of 1,3,7-octatriene (7j and telomers 5 and 6[5,6]. The complex 3 is the resonance form of 2,5-divinylpalladacyclopentane (1) and pallada-3,7-cyclononadiene (2) formed by the oxidative cyclization of butadiene. The second reaction characteristic of Pd is the co-cyclization of butadiene with C = 0 bonds of aldehydes[7-9] and CO jlO] and C = N bonds of Schiff bases[ll] and isocyanate[12] to form the six-membered heterocyclic compounds 9 with two vinyl groups. The cyclization is explained by the insertion of these unsaturated bonds into the complex 1 to generate 8 and its reductive elimination to give 9. 

The red tetrathiomolybdate ion appears to be a principal participant in the biological Cu—Mo antagonism and is reactive toward other transition-metal ions to produce a wide variety of heteronuclear transition-metal sulfide complexes and clusters (13,14). For example, tetrathiomolybdate serves as a bidentate ligand for Co, forming Co(MoSTetrathiomolybdates and their mixed metal complexes are of interest as catalyst precursors for the hydrotreating of petroleum (qv) (15) and the hydroHquefaction of coal (see Coal conversion processes) (16). The intermediate forms MoOS Mo02S 2> MoO S have also been prepared (17). 

Nickel and other transition metals function as solvent-catalysts for the transformation of carbon species into the diamond aHotrope. At temperatures high enough to melt the metal or metal—carbon mixture and at pressures high enough for diamond to be stable, diamond forms by what is probably an electronic mechanism (see Carbon, diamond-synthetic). 

CyclopentadienylthaHium and its alkylated derivatives are used in the synthesis of metallocenes (qv) and other transition-metal cyclopentadienyl complexes (29). 

Zirconium carbide is inert to most reagents but is dissolved by hydrofluoric acid solutions which also contain nitrate or peroxide ions, and by hot concentrated sulfuric acid. Zirconium carbide reacts exothermically with halogens above 250°C to form zirconium tetrahaHdes, and with oxidizers to zirconium dioxide in ak above 700°C. Zirconium carbide forms soHd solutions with other transition-metal carbides and most of the transition-metal... 

The metallocene complexes of M = Ti, Zr, and Hf are most stable when the two Cp groups are not parallel, in contrast to most other transition metal—Cp complexes. The most stable angle for the zirconium metallocenes is ca 40°, which partially accounts for the more interesting chemistry of these compounds compared to other transition metallocenes. 

Carbides of the Iron Group Metals. The carbides of iron, nickel, cobalt, and manganese have lower melting points, lower hardness, and different stmctures than the hard metallic materials. Nonetheless, these carbides, particularly iron carbide and the double carbides with other transition metals, are of great technical importance as hardening components of alloy steels and cast iron. 

Cobalt exists in the +2 or +3 valence states for the majority of its compounds and complexes. A multitude of complexes of the cobalt(III) ion [22541-63-5] exist, but few stable simple salts are known (2). Werner s discovery and detailed studies of the cobalt(III) ammine complexes contributed gready to modem coordination chemistry and understanding of ligand exchange (3). Octahedral stereochemistries are the most common for the cobalt(II) ion [22541-53-3] as well as for cobalt(III). Cobalt(II) forms numerous simple compounds and complexes, most of which are octahedral or tetrahedral in nature cobalt(II) forms more tetrahedral complexes than other transition-metal ions. Because of the small stabiUty difference between octahedral and tetrahedral complexes of cobalt(II), both can be found in equiUbrium for a number of complexes. Typically, octahedral cobalt(II) salts and complexes are pink to brownish red most of the tetrahedral Co(II) species are blue (see Coordination compounds). 

More effort has probably been devoted to study of the corrosion and passivation properties of Fe-Cr-Ni alloys, e.g. stainless steel and other transition-metal alloys, than to any other metallic system [2.42, 2.44, 2.55, 2.56]. The type of spectral information obtainable from an Fe-Cr alloy of technical origin, carrying an oxide and contaminant film after corrosion, is shown schematically in Fig. 2.13 [2.57]. 

The best characterized of these reactions involve the mercuric ion, Hg ", as the cation. The same process occurs for other transition-metal cations, especially Pd, but the products often go on to react fiirther. Synthetically important reactions involving Pd will be discussed in Section 8.2 of Part B. The mercuration products are stable, and this allows a relatively uncomplicated study of the addition reaction itself The usual nucleophile is the solvent, either water or an alcohol. The tenn oxymercuration is used to refer to reactions in... 

Compounds with Sc, Y, lanthanoids and actinoids are of three types. Those with composition ME have the (6-coordinated) NaCl structure, whereas M3E4 (and sometimes M4E3) adopt the body-centred thorium phosphide structure (Th3P4) with 8-coordinated M, and ME2 are like ThAsi in which each Th has 9 As neighbours. Most of these compounds are metallic and those of uranium are magnetically ordered. Full details of the structures and properties of the several hundred other transition metal-Group 15 element compounds fall outside the scope of this treatment, but three particularly important structure types should be mentioned because of their widespread occurrence and relation to other structure types, namely C0AS3,... 

Superoxo complexes having a nonlinear M-O-O configuration are known at present only for Fe, Co, Rh and perhaps a few other transition metals, whereas the Vaska-type (Ila) complexes are known for almost all the transition metals... 

In addition to the applications reported in detail above, a number of other transition metal-catalyzed reactions in ionic liquids have been carried out with some success in recent years, illustrating the broad versatility of the methodology. Butadiene telomerization [34], olefin metathesis [110], carbonylation [111], allylic alkylation [112] and substitution [113], and Trost-Tsuji-coupling [114] are other examples of high value for synthetic chemists. 

I.3.4.2.5.2. Other Transition-Metal-Acyl Complexes 1.3.42.5.2.1. Chiral Cobalt-Acyl Complexes... 

Neutron diffraction studies have shown that in both systems Pd-H (17) and Ni-H (18) the hydrogen atoms during the process of hydride phase formation occupy octahedral positions inside the metal lattice. It is a process of ordering of the dissolved hydrogen in the a-solid solution leading to a hydride precipitation. In common with all other transition metal hydrides these also are of nonstoichiometric composition. As the respective atomic ratios of the components amount to approximately H/Me = 0.6, the hydrogen atoms thus occupy only some of the crystallographic positions available to them. 

There are three areas of activity in the field of arenediazonium salts in interaction with metals and transition elements which have some similarities to metals. First is the use of copper in the reactions of Sandmeyer (1884), Pschorr (1896), Gomberg-Bachmann (1924), and Meerwein (1939). Other transition metal catalysts (Ti and Pd) have been used for such reactions since the 1970s (see Secs. 10.8 and 10.9). Up to now only one intermediate has been directly identified, the aryldiazenido palladium complex (ArN2Pd(PPh3)3]+BF4 (Yamashita et al., 1980 see Sec. 10.9, Scheme 10-64). 

Osmium(VIII) will also oxidize sulphoxides to sulphones146 although this is usually accomplished in alkaline media in contrast to other transition-metal oxidations described above. The reaction may also be carried out in the presence of potassium... 

The 3 percent hydrogen peroxide you get at the drugstore is often protected from decomposing by the addition of sodium silicate, magnesium sulfate, or tin compounds. These stabilizers lock up the iron, copper, and other transition metals that can act as catalysts. 

Cu-mediated Ullman reaction has been used for the polymerization of dihaloaryls. For example, see ref. 3. This type of polymerization as well as other transition-metal-mediated reactions that involve radicals in the polymerization process is not included in this chapter. 

Nishiyama H., Motoyama Y. Other Transition Metal Reagents Chiral Transition-Metal Lewis Acid Catalysis for Asymmetric Organic Synthesis in Lewis Acid Reagents 1999 225, Ed Yamamoto H., Pb. Oxford Univ. Press, Oxford Keywords asymmetric Diels-Alder reactions, chiral transition metal Lewis-acid catalysis, asymmetric synthesis... 

---