Materials pyridine

The clearest evidence for the validity of the molecular-ion concept is the obvious similarity between the UPS and UAS spectra of PVP and those of its corresponding model molecule 2-ethyl pyridine. These spectra are shown in Figs. 5 and 7, respectively. In particular, in Fig. 5 the UPS spectra for the series of materials pyridine(v), 2-ethyl pyridine(v), 2-ethyl pyridine(s), and PVP are presented in order to show explicitly the relative consequences of the 2-ethyl substituent and condensation effects... 

Figure 5. UV photoemission spectroscopy data for the series of materials pyridine (v) (2), 2-ethyl pyridine (s), and poly(2-vinyl pyridine) (s).

Crude oils contain nitrogen compounds in the form of basic substances such as quinoline, isoquinoline, and pyridine, or neutral materials such as pyrrole, indole, and carbazole. 

Perchloric acid Acetic acid, acetic anhydride, alcohols, antimony compounds, azo pigments, bismuth and its alloys, methanol, carbonaceous materials, carbon tetrachloride, cellulose, dehydrating agents, diethyl ether, glycols and glycolethers, HCl, HI, hypophosphites, ketones, nitric acid, pyridine, steel, sulfoxides, sulfuric acid... 

Acetaldehyde, first used extensively during World War I as a starting material for making acetone [67-64-1] from acetic acid [64-19-7] is currendy an important intermediate in the production of acetic acid, acetic anhydride [108-24-7] ethyl acetate [141-78-6] peracetic acid [79-21 -0] pentaerythritol [115-77-5] chloral [302-17-0], glyoxal [107-22-2], aLkylamines, and pyridines. Commercial processes for acetaldehyde production include the oxidation or dehydrogenation of ethanol, the addition of water to acetylene, the partial oxidation of hydrocarbons, and the direct oxidation of ethylene [74-85-1]. In 1989, it was estimated that 28 companies having more than 98% of the wodd s 2.5 megaton per year plant capacity used the Wacker-Hoechst processes for the direct oxidation of ethylene. 

Reactions with Ammonia and Amines. Acetaldehyde readily adds ammonia to form acetaldehyde—ammonia. Diethyl amine [109-87-7] is obtained when acetaldehyde is added to a saturated aqueous or alcohoHc solution of ammonia and the mixture is heated to 50—75°C in the presence of a nickel catalyst and hydrogen at 1.2 MPa (12 atm). Pyridine [110-86-1] and pyridine derivatives are made from paraldehyde and aqueous ammonia in the presence of a catalyst at elevated temperatures (62) acetaldehyde may also be used but the yields of pyridine are generally lower than when paraldehyde is the starting material. The vapor-phase reaction of formaldehyde, acetaldehyde, and ammonia at 360°C over oxide catalyst was studied a 49% yield of pyridine and picolines was obtained using an activated siHca—alumina catalyst (63). Brown polymers result when acetaldehyde reacts with ammonia or amines at a pH of 6—7 and temperature of 3—25°C (64). Primary amines and acetaldehyde condense to give Schiff bases CH2CH=NR. The Schiff base reverts to the starting materials in the presence of acids. 

The nameplate capacities for acetaldehyde production for the United States in 1989 are shown in Table 5 (120). Synthetic pyridine derivatives, peracetic acid, acetate esters by the Tischenko route, and pentaerythritol account for 40% of acetaldehyde demand. This sector may show strong growth in some products but all of these materials maybe prepared from alternative processes. 

Reactivity Acrolein is a highly reactive chemical, and contamination of all types must be avoided. Violent polymerization may occur by contamination with either alkaline materials or strong mineral acids. Contamination by low molecular weight amines and pyridines such as a-picoline is especially hazardous because there is an induction period that may conceal the onset of an incident and allow a contaminant to accumulate unnoticed. After the onset of polymeriza tion the temperature can rise precipitously within rninutes. 

Many valuable chemicals can be recovered from the volatile fractions produced in coke ovens. Eor many years coal tar was the primary source for chemicals such as naphthalene [91-20-3] anthracene [120-12-7] and other aromatic and heterocycHc hydrocarbons. The routes to production of important coal-tar derivatives are shown in Eigure 1. Much of the production of these chemicals, especially tar bases such as the pyridines and picolines, is based on synthesis from petroleum feedstocks. Nevertheless, a number of important materials continue to be derived from coal tar. 

It has also been found that polymers possessing functional groups such as amines and pyridines are soluble in pregeUed sol solutions, especially, poly(2-vin5ipyridine) and poly(N-vinylpyrroHdinone) (PVP) (49). There, materials were made as part of a study of the synthesis of nonshrinking sol—gel-derived networks (49). 

Attempts to broaden the range of materials available as dye precursors have been made (34,35). Oxidative dyes based on pyridine derivatives produce less sensitization than those based on benzene derivatives (36) however, they lack tinctorial power, lightfastness, and availabihty. Derivatives of tetra am in opyrim i din e are claimed to act as primary intermediates to give intense shades with good fastness and excellent toxicological properties (37). 

Halogen Substituents. Halogen functional groups are readily replaced by nucleophiles, eg, hydroxide ion, especially when they ate attached at the a- or y-position of the pyridine ting. This reaction has been exploited in the synthesis of the insecticide chlorpyrifos [2921-88-2J (43) (42), and the insecticide tiiclopyi [55335-06-3] (44) (14,43). 2,3,5,6-Tetiachloiopyiidine [2402-79-1] reacts with caustic to form the hydioxylated material [6515-38-4], which then can be used to form (44) and (43). 

There are no natural sources of pyridine compounds that are either a single pyridine isomer or just one compound. For instance, coal tar contains a mixture of bases, mosdy aLkylpyridines, in low concentrations. Few commercial synthetic methods produce a single pyridine compound, either most produce a mixture of aLkylpyridines, usually with some pyridine (1). Those that produce mono- or disubstituted pyridines as principal components also usually make a mixture of isomeric compounds along with the desired material. 

Raw Material and Energy Aspects to Pyridine Manufacture. The majority of pyridine and pyridine derivatives are based on raw materials like aldehydes or ketones. These are petroleum-derived starting materials and their manufacture entails cracking and distillation of alkanes and alkenes, and oxidation of alkanes, alkenes, or alcohols. Ammonia is usually the source of the nitrogen atom in pyridine compounds. Gas-phase synthesis of pyridines requires high temperatures (350—550°C) and is therefore somewhat energy intensive. 

Reduction. Quinoline may be reduced rather selectively, depending on the reaction conditions. Raney nickel at 70—100°C and 6—7 MPa (60—70 atm) results in a 70% yield of 1,2,3,4-tetrahydroquinoline (32). Temperatures of 210—270°C produce only a slightly lower yield of decahydroquinoline [2051-28-7]. Catalytic reduction with platinum oxide in strongly acidic solution at ambient temperature and moderate pressure also gives a 70% yield of 5,6,7,8-tetrahydroquinoline [10500-57-9] (33). Further reduction of this material with sodium—ethanol produces 90% of /ra/ j -decahydroquinoline [767-92-0] (34). Reductions of the quinoline heterocycHc ring accompanied by alkylation have been reported (35). Yields vary widely sodium borohydride—acetic acid gives 17% of l,2,3,4-tetrahydro-l-(trifluoromethyl)quinoline [57928-03-7] and 79% of 1,2,3,4-tetrahydro-l-isopropylquinoline [21863-25-2]. This latter compound is obtained in the presence of acetone the use of cyanoborohydride reduces the pyridine ring without alkylation. 

Sulfur trioxide reactivity can also be moderated through the use of SO adducts. The reactivity of such complexes is inversely proportional to their stabihty, and consequentiy they can be selected for a wide variety of conditions. Whereas moderating SO reactivity by adducting agents is generally beneficial, the agents add cost and may contribute to odor and possible toxicity problems in derived products. CeUulosic material has been sulfated with SO.—trimethyl amine adduct in aqueous media at 0 to 5°C (16). Sulfur trioxide—triethyl phosphate has been used to sulfonate alkenes to the corresponding alkene sulfonate (17). Sulfur trioxide—pyridine adduct sulfates oleyl alcohol with no attack of the double bond (18). 

Dyes, Dye Intermediates, and Naphthalene. Several thousand different synthetic dyes are known, having a total worldwide consumption of 298 million kg/yr (see Dyes AND dye intermediates). Many dyes contain some form of sulfonate as —SO H, —SO Na, or —SO2NH2. Acid dyes, solvent dyes, basic dyes, disperse dyes, fiber-reactive dyes, and vat dyes can have one or more sulfonic acid groups incorporated into their molecular stmcture. The raw materials used for the manufacture of dyes are mainly aromatic hydrocarbons (67—74) and include ben2ene, toluene, naphthalene, anthracene, pyrene, phenol (qv), pyridine, and carba2ole. Anthraquinone sulfonic acid is an important dye intermediate and is prepared by sulfonation of anthraquinone using sulfur trioxide and sulfuric acid. 

First, the tar acids were removed from the naphtha fractions of light oils and, in the case of CVR tars, carboHc oil. The oils were then mixed with 25—35% sulfuric acid. After separation of the sulfates, the aqueous solution was diluted with water and the resinous material skimmed off. The diluted sulfate solution was boiled to expel any neutral oils, dried by the addition of soHd caustic soda or a2eotropically with ben2ene, and fractionated to yield pyridine, 2-methylpyridine (a-picoline), and a fraction referred to as 90/140 bases, which consisted mainly of 3- and 4-methylpyridines and 2,6-dimethylpyridine (2,6-lutidine). Higher boiling fractions were termed 90/160 and 90/180 bases because 90% of the product distilled at 160 and 180°C, respectively. 

Key intermediates in the industrial preparation of both nicotinamide and nicotinic acid are alkyl pyridines (Fig. 1). 2-Meth5l-5-ethylpyridine (6) is prepared in ahquid-phase process from acetaldehyde. Also, a synthesis starting from ethylene has been reported. Alternatively, 3-methylpyridine (7) can be used as starting material for the synthesis of nicotinamide and nicotinic acid and it is derived industrially from acetaldehyde, formaldehyde (qv), and ammonia. Pyridine is the principal product from this route and 3-methylpyridine is obtained as a by-product. Despite this and largely due to the large amount of pyridine produced by this technology, the majority of the 3-methylpyridine feedstock is prepared in this fashion. 

---