Resolution, mass spectrometry

What mass spectrometry resolution is required for unit resolution of molecular mass 600 and 601 ... 

Mass spectrometers with only a sector magnetic field for mass analysis are known as single-focusing instruments. A well designed single-focusing spectrometer may have resolution as high as 5000. In mass spectrometry, resolution R is defined as... 

Separation of families by merely increasing the resolution evidently can not be used when the two chemical families have the same molecular formula. This is particularly true for naphthenes and olefins of the formula, C H2 , which also happen to have very similar fragmentation patterns. Resolution of these two molecular types is one of the problems not yet solved by mass spectrometry, despite the efforts of numerous laboratories motivated by the refiner s major interest in being able to make the distinction. Olefins are in fact abundantly present in the products from conversion processes. 

Interest in this method has decreased since advances made in gas chromatography using high-resolution capillary columns (see article 3.3.3.) now enable complete identification by individual chemical component with equipment less expensive than mass spectrometry. 

Fisher, I.P. and P. Fisher (1974), Analysis of high boiling petroleum streams by high resolution mass spectrometry . Talanta, Vol. 21, p. 867. 

By high-resolution mass spectrometry, ions of known mass from a standard substance can be separated from ions of unknown mass derived from a sample substance. By measuring the unknown mass relative to the known ones through interpolation or peak matching, the unknown can be measured. An accurate mass can be used to obtain an elemental composition for an ion. If the latter is the molecular ion, the composition is the molecular formula. 

There is no theoretical upper limit on m/z that can be examined, and TOF mass spectrometry is useful for substances having very high molecular mass. In practice, the current upper limit is about 350,000. Unfortunately, ions even of the same m/z value do have a spread of velocities after acceleration, so the resolution achievable with TOF is not very high because bunches of ions of one m/z value overlap those at the next m/z value. 

The incidence of these defects is best determined by high resolution F nmr (111,112) infrared (113) and laser mass spectrometry (114) are alternative methods. Typical commercial polymers show 3—6 mol % defect content. Polymerization methods have a particularly strong effect on the sequence of these defects. In contrast to suspension polymerized PVDF, emulsion polymerized PVDF forms a higher fraction of head-to-head defects that are not followed by tail-to-tail addition (115,116). Crystallinity and other properties of PVDF or copolymers of VDF are influenced by these defect stmctures (117). 

Quantitative mass spectrometry, also used for pharmaceutical appHcations, involves the use of isotopicaHy labeled internal standards for method calibration and the calculation of percent recoveries (9). Maximum sensitivity is obtained when the mass spectrometer is set to monitor only a few ions, which are characteristic of the target compounds to be quantified, a procedure known as the selected ion monitoring mode (sim). When chlorinated species are to be detected, then two ions from the isotopic envelope can be monitored, and confirmation of the target compound can be based not only on the gc retention time and the mass, but on the ratio of the two ion abundances being close to the theoretically expected value. The spectrometer cycles through the ions in the shortest possible time. This avoids compromising the chromatographic resolution of the gc, because even after extraction the sample contains many compounds in addition to the analyte. To increase sensitivity, some methods use sample concentration techniques. 

Confirmation of the identities of nitrosamines generally is accompHshed by gas chromatography—mass spectrometry (gc/ms) (46,87). High resolution gc/ms, as well as gc/ms in various single-ion modes, can be used as specific detectors, especially when screening for particular nitrosamines (87) (see Analytical LffiTHODS Trace and residue analysis). 

Analytical Approaches. Different analytical techniques have been appHed to each fraction to determine its molecular composition. As the molecular weight increases, complexity increasingly shifts the level of analytical detail from quantification of most individual species in the naphtha to average molecular descriptions in the vacuum residuum. For the naphtha, classical techniques allow the isolation and identification of individual compounds by physical properties. Gas chromatographic (gc) resolution allows almost every compound having less than eight carbon atoms to be measured separately. The combination of gc with mass spectrometry (gc/ms) can be used for quantitation purposes when compounds are not well-resolved by gc. 

Spectrometric Analysis. Remarkable developments ia mass spectrometry (ms) and nuclear magnetic resonance methods (nmr), eg, secondary ion mass spectrometry (sims), plasma desorption (pd), thermospray (tsp), two or three dimensional nmr, high resolution nmr of soHds, give useful stmcture analysis information (131). Because nmr analysis of or N-labeled amino acids enables determiaation of amino acids without isolation from organic samples, and without destroyiag the sample, amino acid metaboHsm can be dynamically analy2ed (132). Proteia metaboHsm and biosynthesis of many important metaboUtes have been studied by this method. Preparative methods for labeled compounds have been reviewed (133). 

High resolution mass spectrometry (qv) has been used with extracts of a series of coals to indicate the association of different heteroatoms (27). Various types of chromatography (qv) have also been used to identify the smaller species that can be extracted from coal. 

Diphenylthiirene 1-oxide and several thiirene 1,1-dioxides show very weak molecular ions by electron impact mass spectrometry, but the molecular ions are much more abundant in chemical ionization mass spectrometry (75JHC21). The major fragmentation pathway is loss of sulfur monoxide or sulfur dioxide to give the alkynic ion. High resolution mass measurements identified minor fragment ions from 2,3-diphenylthiirene 1-oxide at mje 105 and 121 as PhCO" and PhCS, which are probably derived via rearrangement of the thiirene sulfoxide to monothiobenzil (Scheme 2). 

A liquid chromatography-mass spectrometry (LC-MS) method that can quantitatively analyze urinar y normal and modified nucleosides in less than 30 min with a good resolution and sufficient sensitivity has been developed. Nineteen kinds of normal and modified nucleosides were determined in urine samples from 10 healthy persons and 18 breast cancer patients. Compounds were separ ated on a reverse phase Kromasil C18 column (2.1 mm I.D.) by isocratic elution mode using 20 mg/1 ammonium acetate - acetonitrile (97 3 % v/v) at 200 p.l/min. A higher sensitivity was obtained in positive atmospheric pressure chemical ionization mode APCI(-i-). 

The degradation of 2,6-xylenol (2,6-dimethylphenol) by bacteria produces a metabolite with elemental composition C8///0O2 as determined by high-resolution mass spectrometry Which carbon skeleton and which relative configuration are deducible from the NMR experiments 44, all obtained from one 1.5 mg sample ... 

The C NMR spectrum of the metabolite shows 16 signals instead of 8 as expected from the elemental composition determined by high-resolution mass spectrometry. Moreover, aromaticity of the 2,6-xylenol is obviously lost after metabolism because two ketonic carbonyl carbon atoms (5c = 203.1 and 214.4) and four instead of twelve carbon signals are observed in the shift range of trigonal carbon nuclei (5c = 133.1, 135.4, 135.6 and 139.4) in the C NMR spectra. To conclude, metabolism involves oxidation of the benzenoid ring. 

Sputtered Neutral Mass Spectrometry (SNMS) is the mass spectrometric analysis of sputtered atoms ejected from a solid surface by energetic ion bombardment. The sputtered atoms are ionized for mass spectrometric analysis by a mechanism separate from the sputtering atomization. As such, SNMS is complementary to Secondary Ion Mass Spectrometry (SIMS), which is the mass spectrometric analysis of sputtered ions, as distinct from sputtered atoms. The forte of SNMS analysis, compared to SIMS, is the accurate measurement of concentration depth profiles through chemically complex thin-film structures, including interfaces, with excellent depth resolution and to trace concentration levels. Genetically both SALI and GDMS are specific examples of SNMS. In this article we concentrate on post ionization only by electron impact. 

Other technique—for example, dynamic secondary ion mass spectrometry or forward recoil spectrometry—that rely on mass differences can use the same type of substitution to provide contrast. However, for hydrocarbon materials these methods attain a depth resolution of approximately 13 nm and 80 nm, respectively. For many problems in complex fluids and in polymers this resolution is too poor to extract critical information. Consequently, neutron reflectivity substantially extends the depth resolution capabilities of these methods and has led, in recent years, to key information not accessible by the other techniques. 

---