Polyethylene liner

Bags made of woven fabric do not generally provide sufficient containment for liquid products, so such bags often incorporate a film liner. Polyethylene is used most often, but aluminum foil or PVDC copolymers can be used to provide improved barrier ability. The liner may be a single material, or have a multilayer construction. Alternatively, the bags can be coated with PVC or latex to make them waterproof. Liners can also be used in bags for solid products. Often the liner is designed to be disposable to facilitate reuse of the bag. 

Calcium resinate Methoxyethyl acrylate coatings, fabrics construction sheet Polyethylene, chlorosulfonated coatings, fabrics membrane liners Polyethylene, chlorosulfonated coatings, fabrics roof coverings Polyethylene, chlorosulfonated coatings, finish floors Shellac... 

In most cases the sample bottle has a wide mouth, making it easy to fill and remove the sample. A narrow-mouth sample bottle is used when exposing the sample to the container cap or to the outside environment is undesirable. Unless exposure to plastic is a problem, caps for sample bottles are manufactured from polyethylene. When polyethylene must be avoided, the container cap includes an inert interior liner of neoprene or Teflon. 

Although each production process yields ash that is essentially chemically equivalent, the various products differ ia physical properties and ia contaminants as shown ia Table 6. Hopper cars, pneumatic tmcks, supersacks, and multiwaH kraft bags with polyethylene liners are the usual shipping containers. 

In the sheeting market, the low density polyethylenes are less important than the high density resins. The high density resins have excellent chemical resistance, stress-crack resistance, durabiUty, and low temperature properties which make them ideal for pond liners, waste treatment faciUties, and landfills. In thicker section, HMW-HDPE sheet makes good containers, trays, tmck-bed liners, disposable items, and concrete molds. The good durabiUty, abrasion resistance, and light weight are critical elements for its selection. 

The 1993 price of high purity anhydrous nickel difluoride was 0.55 /g in 100- or 250-g quantities. Small quantities are stored and shipped in polyethylene bottles, whereas large amounts are shipped in fiber board dmms with polyethylene liners. 

Many initiators attack steels of the AISI 4300 series and the barrels of the intensifiers, which are usually of compound constmction to resist fatigue, have an inner liner of AISI 410 or austenitic stainless steel. The associated small bore pipework and fittings used to transfer the initiator to the sparger are usually made of cold worked austenitic stainless steel. The required pumping capacity varies considerably from one process to another, but an initiator flow rate 0.5 L / min is more than sufficient to supply a single injection point in a reactor nominally rated for 40 t/d of polyethylene. 

MAA and EAA are stable Hquids, and are shipped in nonretumable 208-L (55-gal) polyethylene-lined dmms. For bulk shipments, insulated stainless steel tank containers and tmcks provide secure protection. 2-Acetoacetoxyethyl methacrylate is a Hquid stabili2ed with radical inhibitors such as BHT [128-37-0] and has a shelf life of approximately three months. Shipment is in 60- or 208-L polyethylene-lined dmms. Acetoacetaryhdes are nicely crystalline, stable soHds and are shipped in 208-L dmms with polyethylene liners. 

A composite dmm is constmcted of a plastic, semirigid inner liner (usually polyethylene) and either a steel or fiber outer container or overpack. The composite dmm may be a useful compromise between a plastic dmm and a conventional steel dmm. It is strong enough to be handled like a steel dmm, yet provides an enclosure for chemicals that cannot be shipped safely in steel or fiber dmms. Capacities of composite dmms are 19—208 L (5—55 gal). Such dmms are used in chemical, pharmaceutical, and food industries. 

Alkoxides should be stored under cool, dry conditions. The soHds are packed in polyethylene bags under nitrogen or argon that are shipped in dmms with foam mbber gaskets. For the Hquid alkoxides steel dmms are used, usually with a polyethylene liner. 

In 1971 a metal-backed polyethylene acetabular cup was introduced. This cup provided an eccentric socket which was replaceable, leaving the metal and replacing only the polyethylene. Because of the success of this component, metal-backed high density polyethylene (HDPE) liner is standard for prosthetic acetabular components. Research confirms that metal-backing reduces the peak stresses in the bone cement, and that HDPE forms a successfiil articulating surface for the prosthetic joint. 

Shipment and Storage. The weight per gallon is 5.6 kg. MSG is shipped and stored in 55-gaHon (0.208 m ) steel dmms or 5-gaHon (0.02 m ) steel pads with a polyethylene liner. Anhydrous MSC is also corrosive toward titanium, titanium—palladium, and zirconium as measured in metal strip tests at 50°C. It is classified as a corrosive Hquid. 

Bromates represent a potential fire and explosion hazard if heated, subjected to shock, or acidified. They should not be allowed to contact reactive organic matter, including paper and wood. Industrial quantities are packed in fiber dmms with polyethylene liners or in metal dmms. Laboratory quantities are supphed in glass bottles. For shipment, a yellow oxidizer label is required under DOT regulations. 

Adding dry powder to the reactor by means of grounded metal scoops, where possible, rather than by pouring in directly from drums with polyethylene liners... 

Solvent-home urethanes are still widely used to bond leather and athletic shoes. The OEM automotive market uses some solvent-home urethanes together with chlorosulfonated polyethylene as a primer. Some urethane solvent-home packaging adhesives are used for cap liners and for paper and foil lamination. Some textile laminating applications are still based on solvent-home urethanes. 

Figure 5. One-gallon, low density polyethylene liner in a corrugated carton. Used with various chemicals, including food grade phosphoric acid.

On occasion the polyethylene has been blamed for odors caused by other parts of the container design such as screw cap liners, printing inks on the bottle exterior, adhesives used to laminate polyethylene to paper, and the fiberboard or the lining of material used in the separate exterior overpack in which a polyethylene container is held. Careful selection of all of these related materials is always advisable with liquid food products. 

---