Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Guidelines for

A panoply of methods whose results can be widely scattered are available to the process engineer not knowing the pitfalls attached to this activity, he would like to have a unique method or an exact guideline for applying these methods. [Pg.106]

The prime global authority is the International Maritime Organisation. The IMO sets the standards and guidelines for the removal of offshore installations. The guidelines specify that installations in less than 75 meters of water with substructures weighing less than 4,000 tons be completely removed from the site. Those in deeper water must be removed to a depth of 55 meters below the surface so that there is no hazard to navigation. In some countries the depth to which structures have to be removed has already been extended to 100m. [Pg.365]

The three-part draft of the radioscopy standard pr EN 13068 is ready for the necessary european inquiries. This standard covers the requirements placed on the imaging system, the checking procedures as to the performance of the entire system and also the specifications of user guidelines for certain inspection tasks. The standard remains open to the definition of new inspection classes for future application cases. [Pg.441]

To evaluate the image quality of the processing system, one can determine classical parameters like spatial resolution, contrast resolution, dynamic range, local and global distortion. Guidelines for film digitization procedures have been well described now. Furthermore, a physical standard film for both equipment assessment and digitization calibration and control, will be available in a next future (4). [Pg.501]

ISO 9000-1 Quality management and quality assurance standards - Part 1 Guidelines for selection and use ... [Pg.956]

An additional feature of ELECTRAS is a module which provides an introduction to various data analysis techniques One part of this module provides a typical work flow for data analysis. It explains the important steps when conducting a data analysis and describes the output of the data analysis methods. The second part gives a description of the methods offered. This modvJe can be used both as a guideline for novice users and as a reference for experts. [Pg.452]

Table 9-3 can act as a guideline for the proper selection of a neural network method. It summarizes the different network types and thcii learning strategy, and lists different types of applications. [Pg.464]

Theoretical analysis of convergence in non-linear problems is incomplete and in most instances does not yield clear results. Conclusions drawn from the analyses of linear elliptic problems, however, provide basic guidelines for solving non-linear or non-elliptic equations. [Pg.33]

To ensure that computational chemistry develops in an orderly way, researchers must provide certain information so that others can reproduce and analyze their results. Gund et al. proposed guidelines for reporting molecular modeling results. You should consider these guidelines for your publications. [Pg.7]

A set of written guidelines for analyzing a sample specified by an agency. [Pg.37]

Taylor, B. N. Kuyatt, G. E. Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results, NIST Technical Note 1297, 1994. [Pg.102]

Guidelines for Data Acquisition and Data Quality Control Evaluation in Environmental Chemistry, Ana/. Chem. 1980, 52, 2242-2249. [Pg.103]

The Environmental Protection Agency lays down strict guidelines for the analysis of a range of environmentally hazardous substances. Many of the analyses utilize GC/MS. [Pg.418]

Report of the Dietay Guidelines Advisoy Committee on the Dietay Guidelines for Americans, 1995, U.S. Department of Agriculture, Department of Health and Human Services, Washington, D.C., 1995, pp. 52. [Pg.376]

Guidelines for Good Adhesion. The various adhesion theories can be used to formulate guidelines for good adhesion ... [Pg.230]

Exposure limits for siHcon carbide and powders of zirconium compounds (including zirconium dioxide) have been estabHshed by ACGIH. TLV—TWA s are 10 mg/m and 5 mg/m, respectively. OSHA guidelines for zirconium compounds call for a PEL of 5 mg/m. There are no exposure limits for siHcon nitride powder, but pmdent practice suggests a TLV—TWA of 0.1 mg/m. The soHd ceramics present no apparent health hazard. In machining such ceramics, however, care should be taken to prevent inhalation of respirable particles in amounts in excess of estabHshed limits. Disposal should be in approved landfills the materials are inert and should pose no danger to the environment. [Pg.325]

The Protein Advisory Group, ad hoc, is the working group of the WHO United Nations system involving WHO, EAO, and the United Nations International Childten s Emergency Eund (UNICEE). It has developed guidelines for the evaluation of novel sources of protein, eg, single-cell protein ... [Pg.471]

Guidelines for the Blood Transfusion Services in the United Kingdom, National Institute For Biological Standards and Control, Potters Bar, 1992. [Pg.539]

Guidelines for Hazards Ena/uation Procedures Second Edition with WorkedExampks American Institute of Chemical Engineers, Center for Chemical Process Safety, New York, 1992. [Pg.478]

In comparison, HBI is almost twice as dense as DRI, and thus does not absorb as much water and is much more resistant to reoxidation and corrosion. Several methods of passivating DRI to make it more resistant to reoxidation and corrosion have been developed, but none has been as effective as hot briquetting. Guidelines for offshore shipping of peUet/lump DRI and HBI have been prepared by the International Maritime Organization. [Pg.431]

Instmmentation and control guidelines for processes utilizing magnesium hydroxide and other slurries have been outlined (82). An experimental deterrnination of the accuracy of magnetic dow meters for magnesium hydroxide slurries d owing in pipelines (qv) has been reported (83). [Pg.349]

New product development programs present another type of challenge to the researcher. Often the researcher has no guidelines for evaluating the new product and must formulate a unique plan for developiag enough iaformation to constmct a matrix that would show the risks and rewards of the project. Reference 6 presents 10 commandments for new-product development. [Pg.536]

Society of Automotive Engineers, Reliability and Maintainability Guideline for Manufacturing Machine andEquipment, SAE Order No. M-110, Society of Automotive Engineers (SAE), Warrendale, Pa., 1993. [Pg.16]

Research Needs for Estabhshing Dietary Guidelines for Sodium" in Teseanh NeedsforHstablishing Dietary Guidelinesfor the U.T Population, The National Research Council, National Academy of Sciences, Washington, D.C., 1979. [Pg.389]

Guidelines for Examination in the European Patent Offiice, European Patent Office, Munich, Germany, 1985. [Pg.41]


See other pages where Guidelines for is mentioned: [Pg.469]    [Pg.7]    [Pg.104]    [Pg.7]    [Pg.104]    [Pg.777]    [Pg.527]    [Pg.447]    [Pg.447]    [Pg.35]    [Pg.535]    [Pg.369]    [Pg.461]    [Pg.309]    [Pg.518]    [Pg.77]    [Pg.349]    [Pg.526]    [Pg.29]    [Pg.341]    [Pg.46]    [Pg.86]   
See also in sourсe #XX -- [ Pg.143 , Pg.146 ]




SEARCH



Additional guidelines for organizations performing in vivo bioequivalence studies

Agreed guidelines for levelling out in the destruction of CWPFs

Air Quality Guidelines for Europe

Application Guidelines for Using the GPDC Interpolation Charts

Audits guidelines for

Best Practice Guideline for the Routine

Case Study Selection Guidelines for the Separation and Recovery of Hydrogen in Refineries

Center for Chemical Process Safety guidelines

Centers for Disease Control guidelines

Chemical Exposure Guidelines for Deployed

Chemical Exposure Guidelines for Deployed Military Personnel

Committee for Harmonization Guideline

Consensus Guidelines for Coordinated

Design Qualification Guideline for Cross-Contamination and Decontamination

Design Qualification Guideline for HVAC System of a Pharmaceutical Plant

Design Qualification Guideline for Minimizing the Risk of Product Cross-Contamination by Air Handling System

Design guidelines for surface engineering

Dietary Guidelines for Americans

Disconnections guidelines for

Dosing Guidelines for Patients Requiring Renal Replacement Therapy

Emergency Response Planning Guidelines for Air Contaminants

Emergency Response Planning Guidelines for Air Contaminants ERPG)

Environmental Protection Agency Guidelines for Carcinogen Risk

Environmental, Health, and Safety Guideline for

Environmental, Health, and Safety Guideline for Semiconductor Manufacturing Equipment

Establishing New Radiation Protection Guidelines for Radionuclides of Cerium

Extrusion die design guidelines for polypropylene

Factors Involved in Economic Improvement to Typical Processes and Guidelines for Assessment

GUIDELINES FOR CONTINUED OPERATION

GUIDELINES FOR PROCESS SAFETY METRICS

GUIDELINES FOR REACHING YOUR GOAL

GUIDELINES FOR WRITING A SOP

General Guidelines for Calibration Data Sets

General Guidelines for Materials Selection and Corrosion Allowances

General Guidelines for Silent Chain Drive Selection

General Guidelines for a Recrystallization

General Guidelines for the Use of Gloves

General guidelines for materials selection

Good Manufacturing Practices Guidelines for

Guideline for Experiments

Guideline for Purchasing

Guideline for selecting tube or shell side fluid

Guidelines Designing for Safety

Guidelines for Accident or Injury

Guidelines for Achieving Well-Established Projects

Guidelines for Area Classification and Air Handling

Guidelines for Best Practices

Guidelines for Choosing Cell Technologies

Guidelines for Choosing a Heterologous Expression System

Guidelines for Collecting Outcome Indicators

Guidelines for Company

Guidelines for Company Sponsored Safety

Guidelines for Designing Hand-Operated Devices with Respect to Cumulative Trauma Disorder

Guidelines for Distributors and Multipass-Tray Inlets

Guidelines for Effective Speaking

Guidelines for Effective Troubleshooting

Guidelines for Effective Writing

Guidelines for Employer Compliance

Guidelines for Environmental Infection Control in Healthcare Facilities

Guidelines for Establishing a Laboratory Chemicals Safety and Security Program

Guidelines for GLP

Guidelines for Generating Steam Balance

Guidelines for Generations Derivative Spectra

Guidelines for Instruments

Guidelines for Investigating Chemical

Guidelines for Investigating Chemical Process Incidents

Guidelines for Logic Synthesis

Guidelines for Obtaining the Amino Acid Sequence from a Mass Spectrum

Guidelines for Organic Coating Processes

Guidelines for Performing a Test Run

Guidelines for Preventing Human Error

Guidelines for Preventing Trademarks from Becoming Unprotectable

Guidelines for Recognition and Celebrations

Guidelines for Reproductive Studies

Guidelines for Reuse of an Existing Tower

Guidelines for Risk Based Process Safety

Guidelines for Scaling

Guidelines for Selecting Batch Processes

Guidelines for Setting Goals

Guidelines for Siting of School Facilities

Guidelines for Studying Protein-DNA Interactions with the BIAcore

Guidelines for Tower Specification

Guidelines for Upgrading Program

Guidelines for Use of Tables

Guidelines for VB Mixing

Guidelines for Writing an SOP

Guidelines for accident management

Guidelines for animal toxicity studies

Guidelines for auditing, including a model procedure

Guidelines for authors

Guidelines for choosing antidepressant medications

Guidelines for determination

Guidelines for drawing reaction mechanisms

Guidelines for drinking water quality

Guidelines for good manufacturing

Guidelines for hematological monitoring of patients taking clozapine

Guidelines for inspectors

Guidelines for interpreting data

Guidelines for investigating chemical process

Guidelines for limitations

Guidelines for scale

Guidelines for selection

Guidelines for the Conduct of Drug Studies in Pregnant Women

Guidelines for the Development of Standards

Guidelines for the Preparation of Laboratory Reports

Guidelines for the Study and Evaluation

Guidelines for the acute use of antipsychotic drugs

Guidelines for the certification of training courses offered by Member States

Guidelines for use

History of Radiation Protection Guidelines for Cerium Radionuclides

How to set specifications Examination of the ICH guidelines for residual solvents

Implementation Guidelines for ODE Models

Important guidelines for using computers and networks

Intended Audience for Guidelines

International Guidelines for Diagnostic Assessment

Major Conclusions and General Guidelines for Applying the Modeling

Manufacturing guidelines for

Method validation guidelines for

OCCUPATIONAL STANDARDS AND GUIDELINES FOR LEAD

Occupational Health Guidelines for

Occupational Health Guidelines for Chemical Hazards

Occupational-Exposure Guidelines for Lead

Practical Design Guidelines for Surface Engineering

Practical Guidelines for Algorithm Implementation

Regulations and guidelines for cleaning solvents

Regulatory Guidelines for Clinical Studies

Regulatory Guidelines for Preclinical Studies

Regulatory Guidelines on Dosage Selection for Efficacy

Risk assessment guidelines for

Safety Aspects—Guidelines for Their Inclusion

Safety Aspects—Guidelines for Their Inclusion in Standards

Safety Guideline for Risk Assessment

Safety Guidelines for Compressed Gases and Cryogenic Liquids

Safety Guidelines for Radiation Sources

Safety guidelines for

Selecting Simple Guidelines for Biodegradability

Selection Guidelines for Gas Separation

Setting Guidelines for Residues by Regulatory Authorities

Simple Guidelines for Reaction Stereochemistry

Simple Guidelines for Valence Bond Mixing

Solubility Guidelines for Ionic Compounds in Water

Solubility guidelines, for ionic

Solubility guidelines, for ionic compounds

Some General Guidelines for Bonded Phase Selection

Specialty Guidelines for Genotoxicity Genotoxic Impurities in Pharmaceuticals

Specific Guidelines for Reactions using Catalysts

Summary of Design Guidelines for Multispecies Toxicity Tests

Ten guidelines for catalyst testing

Test Guidelines for Animal Toxicity Studies

Toxicological guidelines for

US-EPA Guidelines for Exposure Assessment

Using Property Guidelines to Design for Reducing Acute Aquatic Toxicity

WHO air quality guideline for Europe

WHO-Guidelines for drinking water quality

World Health Organization guidelines for drinking water

World health organization guidelines for

© 2024 chempedia.info