Fourier transform infrared advantage

The basic methods of the identification and study of matrix-isolated intermediates are infrared (IR), ultraviolet-visible (UV-vis), Raman and electron spin resonance (esr) spectroscopy. The most widely used is IR spectroscopy, which has some significant advantages. One of them is its high information content, and the other lies in the absence of overlapping bands in matrix IR spectra because the peaks are very narrow (about 1 cm ), due to the low temperature and the absence of rotation and interaction between molecules in the matrix. This fact allows the identification of practically all the compounds present, even in multicomponent reaetion mixtures, and the determination of vibrational frequencies of molecules with high accuracy (up to 0.01 cm when Fourier transform infrared spectrometers are used). 

It is only since 1980 that in situ spectroscopic techniques have been developed to obtain identification of the adsorbed intermediates and hence of reliable reaction mechanisms. These new infrared spectroscopic in situ techniques, such as electrochemically modulated infrared reflectance spectroscopy (EMIRS), which uses a dispersive spectrometer, Fourier transform infrared reflectance spectroscopy, or a subtractively normalized interfacial Fourier transform infrared reflectance spectroscopy (SNIFTIRS), have provided definitive proof for the presence of strongly adsorbed species (mainly adsorbed carbon monoxide) acting as catalytic poisons. " " Even though this chapter is not devoted to the description of in situ infrared techniques, it is useful to briefly note the advantages and limitations of such spectroscopic methods. 

The photoacoustic effect was first discovered by Alexander Graham Bell in the early 1880s [18], but it was not applied to Fourier transform infrared (FTIR) spectroscopy until a century later [19,20], Significant advantages of FTIR photoacoustic spectroscopy (PAS) include the following (1) Spectra may be... 

The principal reasons for choosing Fourier transform infrared spectroscopy are first, that these instruments record all wavelengths simultaneously and thus operate with maximum efficiency and, second, that Fourier transform infrared spectroscopy spectrometers have a more convenient optical geometry than do dispersive infrared instruments. These two facts lead to the following advantages. 

More sophisticated detection methods for gas chromatography are also employed in the analysis of hydrocarbons gas chromatography-mass spectrometry (EPA 8270C) and gas chromatography-Fourier transform infrared spectroscopy (EPA 8410). These procedures have a significant advantage in providing better characterization of the contaminants and thus are of particular use where some environmental modification of the hydrocarbons has taken place subsequent to soil deposition. 

Infrared (IR) spectroscopy offers many unique advantages for measurements within an industrial environment, whether they are for environmental or for production-based applications. Historically, the technique has been used for a broad range of applications ranging from the composition of gas and/or liquid mixtures to the analysis of trace components for gas purity or environmental analysis. The instrumentation used ranges in complexity from simple filter-based photometers to optomechanically complicated devices, such as Fourier transform infrared (FTIR) spectrometers. Simple nondispersive infrared (NDIR) insttuments are in common use for measurements that feature well-defined methods of analysis, such as the analysis of combustion gases for carbon oxides and hydrocarbons. For more complex measurements it is normally necessary to obtain a greater amount of spectral information, and so either Ml-spectrum or multiple wavelength analyzers are required. 

In 1993, Blatter and Frei [34] extended the Aronovitch and Mazur [28] photo-oxidation into zeolitic media, which resulted in several distinctive advantages as described below. Irradiation in the visible region (633 nm) of zeolite NaY loaded with 2,3-dimethyl-2-butene, 16, and oxygen resulted in formation of allylic hydroperoxide, 17, and a small amount of acetone. The reaction was followed by in situ Fourier-transform infrared (FTlR) spectroscopy and the products were identified by comparison to authentic samples. The allylic hydroperoxide was stable at - 50°C but decomposed when the zeolite sample was warmed to 20°C [35]. In order to rationalize these observations, it was suggested that absorption of light by an alkene/Oi charge-transfer complex resulted in electron transfer to give an alkene radical cation-superoxide ion pair which collapses... 

The most recent advance in VCD instrumentation has been its adaptation to Fourier transform infrared (FTIR) measurement (23-25). The details of this technique involve a new method of FTIR measurement termed double-modulation FTIR spectroscopy. Thus spectra of very high quality and resolution have been obtained using a standard VCD modulator and detector, a glower source, and a commercially available FTIR spectrometer system. In fact an entire FTIR-VCD spectrometer can be assembled from a few commercially available components. It is found that the major advantages of resolution, throughput, and... 

Fourier-transform infrared (FTIR) spectrometers encode infrared wavenumbers by moving a mirror in a Michelson interferometer which results in a unique, path-dependent pattern of interference for each light wavelength in the IR beam. FTIRs have come to totally dominate the IR market and are the means by which most of the work described in this review was accomplished. Only for some special applications (modulation spectra and time-dependence studies) are dispersive-based (scanning monochromator or tuned laser) spectrometers still used. The advantages of the FTIR approach are that the entire spectral region of interest can... 

Fourier transform infrared (FT IR) spectrometry has been extensively developed over the past decade and provides a number of advantages. Radiation containing all IR wavelengths (e.g., 5000-400 cm1) is split into two beams (Fig. 3.5). One beam is of fixed length, the other of variable length (movable mirror). 

Advantages of Fourier transform infrared spectrometers are so great that it is nearly impossible to purchase a dispersive infrared spectrometer. Fourier transform visible and ultraviolet spectrometers are not commercially available, because of the requirement to sample the interferometer at intervals of S = l/(2Av). For visible spectroscopy, Av could be 25 000 cm 1 (corresponding to 400 nm), giving S = 0.2 im and a mirror movement of 0.1 xm between data points. Such fine control over significant ranges of mirror motion is not feasible. 

Fourier transform infrared spectroscopy (FT—IR) has been developing into a viable analytical technique (56). The use of an interferometer requires a computer which increases the cost of the system. The ability of IR to differentiate geometrical isomers is still an advantage of the system, and computer techniques such as signal averaging and background subtraction, improve capabilities for certain analyses. 

The transform from the interferogram to the spectrum is carried out by the dedicated minicomputer on the instrument. The theory of Fourier-transform infrared spectroscopy has been treated, and is readily available in the literature.21,22,166 Consequently, the advantages of F.t.-i.r. dispersive spectroscopy will only be outlined in a qualitative sense (i) The Fellgett or multiplex advantage arises from the fact that the F.t.-i.r. spectrometer examines the entire spectrum in the same period of time as that required... 

The classical approach to the analysis of mixtures by use of infrared spectroscopy consists in identifying specific, strong bands that belong to a suspected component, obtain a pure spectrum of the suspected component, and then remove those in the spectrum of the mixture that are due to the identified compound. The process is repeated for the remaining bands in the mixture spectra. Once the component spectra are known for a mixture, a series of calibration curves is produced. These curves relate concentration to absorbance, using Beer s law. The concentration of the components of the mixture are then obtained by interpolation. The advantage of Fourier-transform, infrared spectroscopy is that components of a mixture may be... 

Structural study of polysaccharides and other carbohydrates in solution or in the amorphous state has been significantly enhanced through the application of Fourier-transform, infrared spectroscopy. Among the advantages of this method may be mentioned the high quality of the spectra, and the in-house ability to interact with the computer, so that the digitized spectra may be stored and manipulated in such a way that additional information is obtained. The application of F.t.-i.r. spectroscopy in the field of carbohydrate chemistry and biochemistry is still in its infancy,182 but... 

Other modes of detection, such as nuclear magnetic resonance (NMR) and Fourier transform infrared (FT-IR), could be advantageous detection techniques, especially to validate the HPLC of phenolics in various foods, but the cost and complexity of the instrumentation limit the... 

Several researchers have combined the separating power of supercritical fluid chromatography (SFC) with more informative spectroscopic detectors. For example, Pinkston et. al. combined SFC with a quadrupole mass spectrometer operated in the chemical ionization mode to analyze poly(dimethylsiloxanes) and derivatized oligosaccharides (7). Fourier Transform infrared spectroscopy (FTIR) provides a nondestructive universal detector and can be interfaced to SFC. Taylor has successfully employed supercritical fluid extraction (SFE)/SFC with FTIR dectection to examine propellants (8). SFC was shown to be superior over conventional gas or liquid chromatographic methods. Furthermore, SFE was reported to have several advantages over conventional liquid solvent extraction (8). Griffiths has published several... 

Fourier-transform infrared spectrometers offer the advantages of unusually high sensitivity, resolution, and speed. .. offsetting these advantages is their high cost, because a moderately sofisticated dedicated computer is needed to decode the output data [1]. (The sofisticated computer was a 33 MHz PC with 512 K of RAM, current market value 2.)... 

Taking advantage of the speed of a Fourier transform infrared spectrometer (FTIR) and the ability to quantify concentrations, one manufacturer has developed an instrument to be used for quality control of CVD Film depositions. A schematic of the instrument is shown in Figure 20. 

---