Piping fiberglass reinforced

Reinforced Thermosetting Piping Fiberglass Pipe Institute/Composites Institute, a Division of the Society of the Plastics Industry, 355 Lexington Avenue, New York, NY 10017 The Materials Technology Institute of the Chemical Process Industries, Inc., 12747 Olive St. Rd., Suite 203, St. Louis, MO 63141-6269... [Pg.774]

Fiberglass Reinforced Piping Systems for Chemical andindustrialApplications, Smith Eiberglass Products, Inc., Litde Rock, Ark., 1993 to 1994. [Pg.67]

Carbon steel Sch. 40 Fiberglass reinforced polyester Fiberglass reinforced vinylester Glass pipe Aluminum Sch. 40 304 stainless steel Sch. 5 Saran-lined steel Polypropylene- lined steel Rubber-linedsteel Sch. 40 316 stainless steel Sch. 5 304 stainless steel Sch. 40 Kynar-Ifned steel 316 stainless steel Sch. 40 Alloy 20 Sch. 5 FEP Teflon-lined steel PFA Teflon-lined steel Armored-glass pipe PTFE Teflon-lined steel Monel 400 Sch. 5 Nickel 200 Sch. 5 Alloy 20 Sch. 40 Monel 400 Sch. 40 Inconel 600 Sch. 5 Titanium Sch. 5 Nickel 200 Sch. 40 Titanium Sch. 40 Inconel 600 Sch. 40 Glass-lined steel Sch. 40 Hastelloy C-276 Sch. 5 Zirconium Sch. 5 Hastelloy B Sch. 5 Zirconium Sch. 40 Hastelloy C-276 Sch. 40 Hastelloy B Sch. 40 Tantalum-lined steel Sch. 5 Tantalum-lined steel Sch. 40... [Pg.1012]

Flat laminated panels are manufactured using fluorinated sheet substrates. The manufacturing of these test panels simulates the production process used to manufacture the fiberglass-reinforced pipes. The BS6464 test prescribes a minimum adhesive shear and peel strength of 7 MPa and 7 N/mm, respectively. Representative values for both tests are given in Tables 16.9 and 16.10 below. [Pg.253]

Fiberglass reinforced plastic (FRP) is used in composite systems. It is particularly important in the process industry because of its corrosion resistance and light weight. The epoxy resin in the FRP matrix begins to melt at approximately 150°C (302°F). This may be used as a first-order failure criterion. Failure of empty 5-mm thick FRP pipes in 2-6 minutes has been reported (SINTEF,... [Pg.88]

Materials acceptable for underground piping use include ductile iron, fiberglass-reinforced epoxy plastic, polyethylene, polyvinyl chloride, reinforced concrete, and carbon steel. Plastic pipes are not acceptable in areas subject to solvent exposure. [Pg.172]

Carbon steel Sch, 40 Fiberglass reinforced polyester Fiberglass reinforced vinylester Glass pipe Aluminurn Sch. 40 304 Stainless steel Sch. 5 Saran lined steel Polypropylene- (tned steel Rijbbe -lined steel Seh. 40 316 stainless steel Sct>, 5 304 stainless steel Sch. 40 Kynar-linied steel 316 stainless steel Scb. 40... [Pg.136]

D 5686 Standard Specification for Fiberglass (Glass Fiber Reinforced Thermosetting Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type Epoxy Resin, for Condensate Return Lines... [Pg.516]

Polyester-based resins are also used in bulk plastics in fiberglass reinforced fabrications such as boats, auto body repairs, and for very large structures such as industrial vessels and pipes, and ships for mine sweeping [10]. This technology uses a combination of polycondensation and vinyl-type (chain reaction) technologies to obtain the final composite product. The viscous, still fluid resin used for layup is a linear unsaturated polyester of relatively low-molecular weight. Unsaturation is introduced into the backbone of the polymer by using maleic anhydride to replace a part of the phthalic anhydride (e.g., Eq. 21.4). [Pg.693]

Epoxy EP 100°C Usually reinforced with fiberglass and used for commodity piping. Also used as a lining... [Pg.158]

Atlac . [Reichhold/Reactive Polymers] Thermoset polyester resins for fiberglass-reinforced structures, glass-reinforced coatings, mortars in pulp and paper, caustic-chlorine, metal treatment, filament winding, centrifugal casting of large tanks and pipe. [Pg.39]

Dual Laminate - FRP (fiberglass reinforced polyester) piping lined with fluoropolymer is manufactured by forming FRP over a fluoropolymer tube. The resulting stmcture is called adual laminate. [Pg.526]

Epi-Rez . [Rhone-Poulenc/Perf. Resins Coatings] Epoxy resins or sol ns., sonte bal enat for industrial maintenance coadngs, fUm adhesives, fiberglass-reinforced plastics, encapsulation, castings, filament winding, potting compds., chem. resist pipe, elec, d coatings, varnishes, stdv.-frw fcx-mulations, fiber finishes, textiles. [Pg.133]

In the context of corrosion, composites refer to glass or other fiber or flake-reinforced thermosetting resins. Composite products use for their anticorrosion properties are fiberglass-reinforced pipe and storage tanks, fiber-reinforced plastic grating, handrails, I-beams, and other shapes equal to these that are made of steel. [Pg.219]

For a pipe less than 20 cm in diameter, the installed cost of fiber-reinforced pipe (FRP) is 50% greater than steel pipe, while for 20-40 cm pipe, the installed costs of FRP and steel are equal. In the case of pipe larger than 40 cm in diameter the installed cost of FRP is less than that of steel. Overall, the installed cost of an FRP pipe is about 30% higher than the installed cost of steel pipe (Ameron Fiberglass, Personal communication, Aug. 1999.). The 30% extra cost is the actual cost of corrosion, and the annual contribution to the total cost of corrosion by composites is 1,864 billion x 30%, which equals 559 million. [Pg.220]

Survey of long term durability of fiberglass reinforced plastics tanks and pipes... [Pg.267]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...