Materials Technology Institute

Campion, R.P., Permeation through Polymers for Process Industry Applications, MTI Publication No. 53, Materials Technology Institute of the Chemical Process Industries, St Louis, MO distributed by Elsevier Science, Amsterdam, The Netherlands, 2000. 

F. Galen Hodge, Ph.D. (Materials Engineering), P.E. Associate Director, Materials Technology Institute Registered Professional Corrosion Engineer (California) Fellow, American Society for Metals International Fellow, National Association of Corrosion Engineers... 

McIntyre, D. Assessment of Fire and Explosion Damage to Chemical Plant Equip-ment/Analyzing Explosions and Pressure Vessel Ruptures. Materials Technology Institute of the Chemical Process Industries, Publication 30, National Association of Corrosion Engineers. 

The Materials Technology Institute of the Chemical Process Industry (MTI) has identified five corrosion tests for iron- and nickel-based alloys, out of which two concern the resistance to crevice corrosion. The method MTI-2, originating from ASTM G48, involves the use of 6% ferric chloride solution for determining the relative resistance of alloys to crevice corrosion in oxidizing chloride environment. The method MTI-4 uses an increase in neutral bulk Cl- concentration at eight levels, ranging from 0.1 to 3% NaCl, to establish the minimum critical Cl concentration that produces crevice corrosion at room temperature (20-24°C).43,44... 

C.R Dillon Associates, Guidelines for Control of Stress Corrosion Cracking of Nickelbearing Stainless Steels and Nickel Alloys, MTI Manual No. 1, The Materials Technology Institute of the Chemical Process Industries Inc., 1979. 

Dillon, C. Corrosion Control in the Chemical Process Industries, Material Technologies Institute for the Chemical Process Industries St. Louis, MO, 1994. 

D.R. Mclntire and C.P. Dillon, Guidelines for Preventing Stress Corrosion Cracking in the Process Industries, MTI Publication 15, Materials Technology Institute of the Chemical Process Industry, Inc., March 1985, p 23... 

The Materials Technology Institute (MTI) of the Chemical Process Industries, Inc. published a compilation of experiences of corrosion failure mechanisms in process industries (35). 

Corrosion under Heat-Transfer Conditions MTI Publ. Nr. 17, Materials Technology Institute, Columbus, Ohio, U. S. A., 1985. 

Hutchings IM. The Erosion of Materials by Liquid Flow. MTI Publ. No 25. Materials Technological Institute of the Chemical Processing Industry, 1986. 

MTI Materials Technology Institute (MTI) 1215 Fern Ridge Parkway, Suite 206, St. Louis, MO 63141-4405, United States Telephone (314) 576-7712 Fax (314) 576-6078 E-mail mtiadmin mti-global.org Internet http //vww.mti-global.org/... 

MTI, Report of Task Group 1 of the Working Party on Expert Systems in Materials Engineering, Materials Technology Institute, Vol. 1-124, 1990, St. Louis, MO. 

If the test procedure is to be used by other laboratories, either to qualify on the basis of a specification or simply to compare results among laboratories, then it is important that reproducibility of results be determined. This is accomplished through round-robin tests that are conducted among interested laboratories to develop standard test procedimes, such cis those that are developed by ASTM International, Comit6 European Normalization (CEN), International Organization for Standardization (ISO), Japanese Standards Association (JSA), Materials Technology Institute (MTI) of the Chemical Process Industries, and NACE International. 

J5] McIntyre, D. R., Experience Survey Stress Corrosion Cracking of Austenitic Stainless Steels in Water, MTI Publication 27, Materials Technology Institute of the Chemical Process Institute, Inc., St. Louis, MO, February 1977. 

The test exposure intervals specified in the Materials Technology Institute Manual No. 3 [2], for instance, are 96 and 192 h for immersion testing. Examples of corrosion rates determined for these time intervals are shown in Table 1. Even with these relatively long test periods, some variation in test results can be seen, especially in sulfuric acid. 

Reinforced Thermosetting Piping Fiberglass Pipe Institute/Composites Institute, a Division of the Society of the Plastics Industry, 355 Lexington Avenue, New York, NY 10017 The Materials Technology Institute of the Chemical Process Industries, Inc., 12747 Olive St. Rd., Suite 203, St. Louis, MO 63141-6269... 

Dillon CP. Unusual Corrosion Problems in the Chemical Industry. St. Louis, Mo. Materials Technology Institute (MTI), 2000. 

Pope DH, Duquette D, Wayner Jr. PC, Johannes AH. Microbiologically Influenced Corrosion A State-of-the-Art Review. 2nd edn. Columbus, Ohio Materials Technology Institute, 1989. 

---