Excel numeric format

Finally, the effort to assess the quality of the data is wasted if the information is not passed on to the data user. Such users may not be a scientist, so effort must be made to present the data quality information in a manner that they can understand. The G-BASE project when distributing data to users makes use of font formatting, colour coding and highlighting in Excel spreadsheets to pass on information on quality, and Fig. 5.14 is a key to such an Excel document. This gives the user data in a completely numeric format with simple and straightforward advice about how it should be used. It is then up to the data user to choose whether to ignore the advice. 

Import any or all of the tables into an Excel spreadsheet in a numeric format. You must have a copy of Excel installed on your PC to run this addition to the application. 

The creation of active sites as well as the graft polymerization of monomers may be carried out by using radiation procedures or free-radical initiators. This review is not devoted to the consideration of polymerization mechanisms on the surfaces of porous solids. Such information is presented in a number of excellent reviews [66-68]. However, it is necessary to focus attention on those peculiarities of polymerization that result in the formation of chromatographic sorbents. In spite of numerous publications devoted to problems of composite materials produced by means of polymerization techniques, articles concerning chromatographic sorbents are scarce. As mentioned above, there are two principle processes of sorbent preparation by graft polymerization radiation-induced polymerization or polymerization by radical initiators. We will also pay attention to advantages and deficiencies of the methods. 

Errors and Inconsistencies in Formatting Dates. It is also necessary to use standardized formats to record dates. For example, Oracle stores a date as the number of seconds since January 1, 4712 BC, and then uses various functions to display the dates in more human-friendly formats. There are many different and personal ways for recording dates one of the authors (AS) has noted at least 25 different ways in a single clinical trial submitted for FDA review Should February 1,2007 be recorded as 1 February 2007,1 Feb 2007, 1 Feb 07, or 02/01/07 This problem still exists when data for numerical dates are extracted into software programs such as Excel that do not force the user to select a unique format for dates. 

Illustration Satellite formation in capillary breakup. The distribution of drops produced upon disintegration of a thread at rest is a unique function of the viscosity ratio. Tjahjadi et al. (1992) showed through inspection of experiments and numerical simulations that up to 19 satellite drops between the two larger mother drops could be formed. The number of satellite drops decreased as the viscosity ratio was increased. In low-viscosity systems p < 0(0.1)] the breakup mechanism is self-repeating Every pinch-off results in the formation of a rounded surface and a conical one the conical surface then becomes bulbous and a neck forms near the end, which again pinches off and the process repeats (Fig. 21). There is excellent agreement between numerical simulations and the experimental results (Fig. 21). 

Chemical solution deposition (CSD) procedures have been widely used for the production of both amorphous and crystalline thin films for more than 20 years.1 Both colloidal (particulate) and polymeric-based processes have been developed. Numerous advances have been demonstrated in understanding solution chemistry, film formation behavior, and for crystalline films, phase transformation mechanisms during thermal processing. Several excellent review articles regarding CSD have been published, and the reader is referred to Refs. 5-12 for additional information on the topic. Recently, modeling of phase transformation behavior for control of thin-film microstructure has also been considered, as manipulation of film orientation and microstructure for various applications has grown in interest.13-15... 

The unique surface characteristics of polysiloxanes mean that they are extensively used as surfactants. Silicone surfactants have been thoroughly studied and described in numerous articles. For an extensive, in-depth discussion of this subject, a recent chapter by Hill,476 and his introductory chapter in the monograph he later edited,477 are excellent references. In the latter monograph, many aspects of silicone surfactants are described in 12 chapters. In the introduction, Hill discusses the chemistry of silicone surfactants, surface activity, aggregation behavior of silicone surfactants in various media, and their key applications in polyurethane foam manufacture, in textile and fiber industry, in personal care, and in paint and coating industries. All this information (with 200 cited references) provides a broad background for the discussion of more specific issues covered in other chapters. Thus, surfactants based on silicone polyether co-polymers are surveyed.478 Novel siloxane surfactant structures,479 surface activity and aggregation phenomena,480 silicone surfactants application in the formation of polyurethane foam,481 foam control and... 

The determination of the microstructure of vinyl polymers is not merely a characterisation tool. Each polymer molecule is unique, and each polymer chain is a record of the history of its formation, including mis-insertions, rearrangements, the incorporation of co-monomers, and the mode of its termination. NMR analysis of polymers can therefore be used to provide detailed mechanistic and kinetic information. This approach has been applied particularly successfully to the microstructure, i. e. the sequence distribution of monomer insertions, of polypropylene, giving rise to a wealth of studies far too numerous to cover here. Progress in this area has recently been summarised in two excellent and very comprehensive review articles [122, 123[. Here we will cover only the most fundamental aspects of stereoselective polymerisations. 

This book is a compilation of all various types of electronic circuits. Such compilations are not unusual in fact, there are several excellent circuit encyclopedias on bookshelves. However, this book goes several steps further. Instead of simply presenting the circuit to the reader, it also provides a SPICE schematic and details about the equivalent hardware performance. The intricacies involved in developing an accurate SPICE model of the circuit are also included. This format benefits readers in numerous ways. First, it allows them to emulate the correlation techniques introduced in this book in order to make their own SPICE models accurately mimic the behavior of the hardware. Secondly, it allows them to clearly see where SPICE excels in its ability to represent real hardware performance. 

The formation of benzene (or substituted benzene derivatives) is a common transformation catalyzed by numerous homogeneous and heterogeneous metal catalysts, mainly Co, Rh, Pd, and Ni.63-69 Even highly crowded molecules, such as hexaisopropylbenzene, could be synthesized in the presence of metal carbonyls such as [Co(CO)4]2.70 A very simple catalyst system, Me3SiCl and Pd on carbon in refluxing tetrahydrofuran, has been shown to transform symmetrical alkynes into hexaalkylbenzenes in excellent yield.71... 

The only methodology pertinent to the formation of 1,2- and 1,3-oxathietanes and their oxidized forms involving S-C and O-C bond formations is that for the preparation of /3-sultones. It is now well established that [7t2s+Jt2s] cycloaddition of sulfur trioxide with an alkene generates /3-sultones in moderate to excellent yields (Equation 1). Indeed, the previous version of this chapter detailed numerous examples of the formation of /3-sultones (especially fluorinated compounds) by the reaction of SO3 with an appropriate alkene at elevated temperatures <1996CHEC-II(1B)1083>. 

Polyesterification. High molecular weight linear polyester resins, such as poly(ethylene terephthalate) (PET), poly(propylene terephthalate) (PPT), and poly(butylene terephthalate) (PBT), can be produced by either transesterification of dimethyl terephthalate (DMT) with an excess of the corresponding diol or by direct esterification of terephthalic acid (TPA). Tetraalkyl titanates, such as TYZOR TPT or —TYZOR TBT, have been found to be excellent catalysts for either of these reactions. However, in the case of PET, the residual titanate catalyst reacts with trace quantities of aldehydic impurities produced in the polymerization process to generate a yellow discoloration of the polymer (468,469). In the case of PPT and PBT, where the color of polymer is not as critical, organic titanates are the catalyst of choice because of their greater reactivity than antimony or tin (470). Numerous processing variations have been described in the literature to minimize formation of tetrahydrofuran in the PBT process (471—472). 

---