Elemental analysis spectroscopy

Elemental analysis, spectroscopy, pyrolysis-GC-mass spectrometry... 

Matusiewicz, H. A review of acid vapour-phase sample digestion of inorganic and organic matrices for elemental analysis. Spectroscopy 6, 38 6 (1991)... 

Multielemental Analysis Atomic emission spectroscopy is ideally suited for multi-elemental analysis because all analytes in a sample are excited simultaneously. A scanning monochromator can be programmed to move rapidly to an analyte s desired wavelength, pausing to record its emission intensity before moving to the next analyte s wavelength. Proceeding in this fashion, it is possible to analyze three or four analytes per minute. 

Instrumental Analysis. It is difficult to distiaguish between the various acryhcs and modacryhcs. Elemental analysis may be the most effective method of identification. Specific compositional data can be gained by determining the percentages of C, N, O, H, S, Br, Cl, Na, and K. In addition the levels of many comonomers can be estabhshed usiag ir and uv spectroscopy. Also, manufacturers like to be able to identify their own products to certify, for example, that a defective fiber is not a competitor s. To facihtate this some manufacturers iatroduce a trace of an unusual element as a built-ia label. 

Trace-element analysis of metals can give indications of the geographic provenance of the material. Both emission spectroscopy (84) and activation analysis (85) have been used for this purpose. Another tool in provenance studies is the measurement of relative abundances of the lead isotopes (86,87). This technique is not restricted to metals, but can be used on any material that contains lead. Finally, for an object cast around a ceramic core, a sample of the core material can be used for thermoluminescence dating. 

Trace-element analysis, using emission spectroscopy (107) and, especially, activation analysis (108) has been appHed in provenance studies on archaeological ceramics with revolutionary results. The attribution of a certain geographic origin for the clay of an object excavated elsewhere has a direct implication on past trade and exchange relationships. 

Chemical Properties. Elemental analysis, impurity content, and stoichiometry are determined by chemical or iastmmental analysis. The use of iastmmental analytical methods (qv) is increasing because these ate usually faster, can be automated, and can be used to determine very small concentrations of elements (see Trace AND RESIDUE ANALYSIS). Atomic absorption spectroscopy and x-ray fluorescence methods are the most useful iastmmental techniques ia determining chemical compositions of inorganic pigments. Chemical analysis of principal components is carried out to determine pigment stoichiometry. Analysis of trace elements is important. The presence of undesirable elements, such as heavy metals, even in small amounts, can make the pigment unusable for environmental reasons. 

Only slightly less accurate ( 0.3—0.5%) and more versatile in scale are other titration techniques. Plutonium maybe oxidized in aqueous solution to PuO " 2 using AgO, and then reduced to Pu" " by a known excess of Fe", which is back-titrated with Ce" ". Pu" " may be titrated complexometricaHy with EDTA and a colorimetric indicator such as Arsenazo(I), even in the presence of a large excess of UO " 2- Solution spectrophotometry (Figs. 4 and 5) can be utilized if the plutonium oxidation state is known or controlled. The spectrophotometric method is very sensitive if a colored complex such as Arsenazo(III) is used. Analytically usehil absorption maxima and molar absorption coefficients ( s) are given in Table 10. Laser photoacoustic spectroscopy has been developed for both elemental analysis and speciation (oxidation state) at concentrations of lO " — 10 M (118). Chemical extraction can also be used to enhance this technique. 

Naiiow-line uv—vis spectia of free atoms, corresponding to transitions ia the outer electron shells, have long been employed for elemental analysis usiag both atomic absorption (AAS) and emission (AES) spectroscopy (159,160). Atomic spectroscopy is sensitive but destmctive, requiring vaporization and decomposition of the sample iato its constituent elements. Some of these techniques are compared, together with mass spectrometry, ia Table 4 (161,162). 

Chain Structure. The chemical composition of poly (vinyhdene chloride) has been confirmed by various techniques, including elemental analysis, x-ray diffraction analysis, degradation studies, and in, Raman, and nmr spectroscopy. The polymer chain is made up of vinyhdene chloride units added head-to-tail ... 

An azo coupling reaction of monatomic phenols with diazotized 4-nitroaniline has been investigated. By HPLC, NMR, elemental analysis, UV and IR spectroscopy it has been shown that the azo derivatives of o-guaiacol, o- and m-cresols interact with an excess of diazonium in pH interval of 4,5-9,5 and form corresponding 4,4-di(4-nitrophenylazo)-2,5-cyclohexadien-1 -ones. 

The chemical composition of particulate pollutants is determined in two forms specific elements, or specific compounds or ions. Knowledge of their chemical composition is useful in determining the sources of airborne particles and in understanding the fate of particles in the atmosphere. Elemental analysis yields results in terms of the individual elements present in a sample such as a given quantity of sulfur, S. From elemental analysis techniques we do not obtain direct information about the chemical form of S in a sample such as sulfate (SO/ ) or sulfide. Two nondestructive techniques used for direct elemental analysis of particulate samples are X-ray fluorescence spectroscopy (XRF) and neutron activation analysis (NAA). 

An intensely colored by-product of the photolysis reaction of methyl-2-azidobenzoate has been identified as the first known derivative of 3,3 -diazaheptafulvalene 70 (94LA1165). Its molecular mass was established by elemental analysis and mass spectroscopy as that of a formal nitrene dimer, whereas and NMR studies demonstrated the twofold symmetry as well as the existence of a cross-conjugated 14 7r-electron system in 70. Involving l-azido-2,3-dimethoxy-5,6-dimethoxycarbonylbenzene in thermal decomposition reactions, the azaheptafulvalene 71 could be isolated and characterized spectroscopically and by means of X-ray diffraction. Tliis unusual fulvalene can be regarded as a vinylogous derivative of azafulvalenes (96JHC1333) (Scheme 28). 

Table 8 shows results obtained from the application of various bulk and surface analysis methods to lithium metal at rest or after cyclization experiments, as well as at inert and carbon electrodes after cathodic polarization. The analytical methods include elemental analysis, X-ray photoelectron spectroscopy (XPS or ESCA), energy-dispersive analysis of X-rays (X-ray mi-... 

In his pioneering work, Sus (1944) assumed that the final product of photodediazoniation of 2,1-diazonaphthoquinone (10.75) is indene-l-carboxylic acid (10.79, not the 3-isomer 10.78). He came to this conclusion on the basis of some analogies (in addition to an elemental analysis). Cope et al. (1956) as well as Yates and Robb (1957) found that the infrared spectrum of the product was consistent with an a,P-unsaturated acid. Later, Melera et al. (1974) verified the structure 10.78 by H NMR spectroscopy. Friedrich and Taggart (1975) showed that the equilibrium between 10.78 and 10.79 at 233 K lies on the side of the latter, but 10.78 clearly predominates at or above 0°C. Ponomareva et al. (1980) showed that not only 2,1-, but also 1,2-diazo-naphthoquinone yields indene-3- and not -1-carboxylic acid. 

Useful information such as the functionality and crystallinity of the polymers can be obtained by using infrared spectroscopy. Elemental analysis is also considered as one of die tools for die characterization of die polymers. Due to die endgroups and incomplete combustion of the carbon, it is common to observe die low-value carbon content than die theoretical one. 

Diazoalkanes are u.seful is precursors to ruthenium and osmium alkylidene porphyrin complexes, and have also been investigated in iron porphyrin chemistry. In an attempt to prepare iron porphyrin carbene complexes containing an oxygen atom on the /(-carbon atom of the carbene, the reaction of the diazoketone PhC(0)C(Ni)CH3 with Fe(TpCIPP) was undertaken. A low spin, diamagnetic carbene complex formulated as Fe(TpCIPP)(=C(CH3)C(0)Ph) was identified by U V-visible and fI NMR spectroscopy and elemental analysis. Addition of CF3CO2H to this rapidly produced the protonated N-alkyl porphyrin, and Bit oxidation in the presence of sodium dithionitc gave the iron(II) N-alkyl porphyrin, both reactions evidence for Fe-to-N migration processes. ... 

The structure of poly(iminocarbonates) synthesized by the direct interfacial polymerization of BPA and cyanogen bromide was analyzed by NMR, Fourier transform infrared spectroscopy and elemental analysis and found to be identical in all aspects to authentic poly(imino-carbonates) obtained by solution polymerization (46). 

In this chapter we have limited ourselves to the most common techniques in catalyst characterization. Of course, there are several other methods available, such as nuclear magnetic resonance (NMR), which is very useful in the study of zeolites, electron spin resonance (ESR) and Raman spectroscopy, which may be of interest for certain oxide catalysts. Also, all of the more generic tools from analytical chemistry, such as elemental analysis, UV-vis spectroscopy, atomic absorption, calorimetry, thermogravimetry, etc. are often used on a routine basis. 

The scanning transmission electron microscope (STEM) was used to directly observe nm size crystallites of supported platinum, palladium and first row transition metals. The objective of these studies was to determine the uniformity of size and mass of these crystallites and when feasible structural features. STEM analysis and temperature programmed desorption (TPD) of hydrogen Indicate that the 2 nm platinum crystallites supported on alumina are uniform In size and mass while platinum crystallites 3 to 4 nm in size vary by a factor of three-fold In mass. Analysis by STEM of platinum-palladium dn alumina established the segregation of platinum and palladium for the majority of crystallites analyzed even after exposure to elevated temperatures. Direct observation of nickel, cobalt, or iron crystallites on alumina was very difficult, however, the use of direct elemental analysis of 4-6 nm areas and real time Imaging capabilities of up to 20 Mx enabled direct analyses of these transition metals to be made. Additional analyses by TPD of hydrogen and photoacoustic spectroscopy (PAS) were made to support the STEM observations. 

This paper describes the successful incorporation of molybdenum and molybdenum-nickel clusters into zeolites with 12-membered ring by aqueous ion exchange and application of the resulting materials to HDS reaction of benzothiophene. Stoichiometry of the ion exchange was examined by elemental analysis. UV-visible spectroscopy and EXAFS measurements were carried out to investigate the structure of molybdenum species loaded on zeolites. 

The reaction can be easily monitored by IR spectroscopy since surface silanols give a characteristic peak at 3747 cm hi order to establish the mass balance, it is necessary to obtain an elemental analysis of the solid (M, C, H, N. ..) and to measure the amoimt of alkane evolved Wing grafting. 

Scheme 2, vide infra for characterization of these structures) [15]. At an intermediate temperature of 500 °C, a 65/35 mixture of these two complexes is obtained [16]. The proposed structure is further confirmed by the mass balance analysis since hydrolysis or ethanolysis of the resulting solid yields the complementary amounts of neopentane, these are 2 and 3 equiv. of neopentane/Ta for [(=SiO)2Ta(= CHlBu)(CH2fBu)] and [(=SiO)Ta(= CH(Bu)(CH2fBu)2], respectively. Moreover, elemental analysis provides further information indeed, 4.2 wt % of Ta grafted onto sihca partially dehydroxylated at 700 °C corresponds to 0.22 mmol of Ta/g of sofid [ 17,18]. This is comparable to the amount of silanol present on this support (0.26 mmol OH/g), which shows that most of them have reacted during grafting (as observed by IR spectroscopy). 

Since we are interested in evaluating structure-activity relationships (see Sect. 2.2), it is important to combine several analytical methods to allow a characterization at a molecular level for example, elemental analysis, IR, and advanced NMR spectroscopies, EXAFS and chemical reactivity studies. 

Hydroxycoumarin (67) was found to react with o-phenylenediamine on refluxing in toluene to give product 69 (Scheme 20). According to the elemental analysis, IR and NMR spectroscopy data, the structure of 4-(2-... 

---