Ease of Application

Dispensing of the adhesives is discussed in more detail in Section 8.1. 

Paints must be easy to apply, and to be practical engineering materials, there must be a minimum of lost time or additional expense when painting. Paints must also be applied to the substrate in the specific film thickness, dry in the specified time to the desired appearance, and possess the necessary specific properties. 

---

To support them, therefore, immense activities are prompted both in pubh c private sectors with increasing importance on NDT. The particular application of radiography using Ir-192 isotopes for industrial production, construction maintenance of industries, power plants, oil and gas pipelines plants, railway, aviation systems, naval structures and vessels, etc is currently in the fore front for its reliabih ly, ease of application record keeping advantages. 

The peak value of a fault current will depend upon the content of the d.c. component. The d.c. component will depend upon the p.f. of the faulty circuit and the instant at which the short-circuit commences on the current wave. (Refer to Figure 13.27, illustrating the variation in asymmetry with the p.f. of the faulty circuit. For ease of application, it is represented as a certain multiple of the r.m.s. value of the symmetrical fault current /sc )... 

Residual voltages under different operating conditions To extend the ease of application of this device, consider the following circuit conditions to determine the quantum of residual voltages ... 

Pressure-sensitive adhesives (PSAs) based on acrylic, natural rubber and silicone are employed primarily for ease of application. To name Just a few applications, PSAs bond decals to surfaces, interior decorative surfaces to interior panels, interior trim pieces in place directly or hook and loop tape for the same purpose, structural shims in place during manufacturing and acoustic (sound deadening) materials to body skin interior surfaces. Tape products with pressure-sensitive adhesive on one or both surfaces are used for such functions as cargo compartment sealing, as a fluid barrier to prevent spills and leaks in the lavatories and... 

With the availabihty of computers, the transfer matrix method [14] emerged as an alternative and powerful technique for the study of cooperative phenomena of adsorbates resulting from interactions [15-17]. Quantities are calculated exactly on a semi-infinite lattice. Coupled with finite-size scaling towards the infinite lattice, the technique has proved popular for the determination of phase diagrams and critical-point properties of adsorbates [18-23] and magnetic spin systems [24—26], and further references therein. Application to other aspects of adsorbates, e.g., the calculation of desorption rates and heats of adsorption, has been more recent [27-30]. Sufficient accuracy can usually be obtained for the latter without scaling and essentially exact results are possible. In the following, we summarize the elementary but important aspects of the method to emphasize the ease of application. Further details can be found in the above references. 

Road markers require ease of application and very quick drying. 

It is estimated that approximately 40% of the world production of zinc is consumed in hot-dip galvanising of iron and steel, and this adequately demonstrates the world-wide use of zinc as a protective coating. The success of zinc can be largely attributed to ease of application, low cost and high corrosion resistance. 

Ease of application. It must be possible to apply the coating in the factory or in the field at a reasonable rate and to handle the pipe reasonably quickly after the coating has been applied without damaging the coating. 

These coatings provide the most effective fire-resistant system available but originally were deficient in paint color properties. Since, historically, the intumescence producing chemicals were quite water-soluble, coatings based thereon did not meet the shipping can stability, ease of application, environmental resistance, or aesthetic appeal required of a good protective coating. 

Immunophenotyping by flow cytometry has taken on an increasingly important role in the diagnosis of leukemia. Owing to the ease of application, sensitivity, and quantifiable results, flow cytometry is the preferred method for lineage assignment.7 This approach takes advantage of the development of monoclonal antibodies... 

A number of attributes of topical drug systems that may be classified as cosmetic can make patients more or less willing to use their medications (compliant). These include ease of application, the feel of the preparation once it is on the skin, and the appearance of the applied film. Ideally, the application should be undetectable to the eye and neither tacky nor greasy. Certain items,... 

The fact that the aftertreatment of direct dyes has a long history is not surprising since wet fastness within this class is not particularly good. Their prime advantages are ease of application and economy compared with dyes of higher fastness (reactive, sulphur or vat) -hence the continued search for highly effective aftertreatments that improve wet fastness... 

No unique problems have been encountered with silver braze materials. The choice of braze composition is determined by ease of application to the material to be joined however, cadmium containing silver brazes shall not be used. 

Most of the forementioned studies which examined the influence of various dietary fiber on the bioavailability of calcium by human subjects have depended upon the comparative measurements of calcium content of diets and calcium contents of stools and urine. As reviewed by Allen (3), calcium balance studies have distinct limitations relative to accuracy and precision. However, their ease of application and cost, laboratory equipment requirements, and real (or perceived) safety in comparison to available radioactive or stable isotope methods continue to make their use popular. In calcium balance studies, calcium absorption is assumed to be the difference between calcium excretion in the feces and calcium intake. Usually this is expressed as a percent of the calcium intake. This method assumes that all fecal calcium loss is unabsorbed dietary calcium which is, of course, untrue since appreciable amounts of calcium from the body are lost via the intestinal route through the biliary tract. Hence, calcium absorption by this method may underestimate absorption of dietary calcium but is useful for comparative purposes. It has been estimated that bile salts may contribute about 100 g calcium/day to the intestinal calcium contents. Bile salt calcium has been found to be more efficiently absorbed through the intestinal mucosa than is dietary calcium (20) but less so by other investigators (21). 

With the advent of modern fertilizers, seaweed fell out of use because of the ease of application of formulated pesticides and because the contamination of seaweed washed up on beaches with plastic waste (fishing lines and ropes, bottles, etc.). With the onset of green agriculture and the increasing demand for organically farmed produce, seaweed use as a fertilizer has come back into fashion. 

Many seemingly simple adhesive applications are actually complex. The labels on commercial dry cell batteries can contain over a dozen layers each present for a specific purpose. Although price is a major consideration, ease of application is another. Thus, while many naturally derived adhesives are less expensive, synthetic materials may be chosen because of ready application and consistency of the end product. 

Seiler and Dunitz point out that the main reason for the widespread acceptance of the simple ionic model in chemistry and solid-state physics is its ease of application and its remarkable success in calculating cohesive energies of many types of crystals (see chapter 9). They conclude that the fact that it is easier to calculate many properties of solids with integral charges than with atomic charge distributions makes the ionic model more convenient, but it does not necessarily make it correct. 

A very limited number of spray reagents with advantages of sensitivity, selectivity, and ease of application have been described. Additional tests have been reported that can be applied to more specific situations.15,91... 

---