Methods stable isotope

Samples Method Stable isotopes Precision References... 

In this method, stable isotopes (e.g., 13C or 2H labeled) of the analytes of interest are added to the sample before extraction. The isotopes are used as internal standards and will correct for any analyte losses during sample work up. They do not give an indication of extraction efficiency. By adding a recovery standard before GC analysis, the recovery of the isotopes can be calculated and reported. 

Cutting agent Lime method Stable isotope ratio... 

Naturally occurring krypton contains six stable isotopes. Seventeen other unstable isotopes are now recognized. The spectral lines of krypton are easily produced and some are very sharp. While krypton is generally thought of as a rare gas that normally does not combine with other elements to form compounds, it now appears that the existence of some krypton compounds is established. Krypton difluoride has been prepared in gram quantities and can be made by several methods. A higher fluoride of krypton and a salt of an oxyacid of krypton also have been... 

A number of special processes have been developed for difficult separations, such as the separation of the stable isotopes of uranium and those of other elements (see Nuclear reactors Uraniumand uranium compounds). Two of these processes, gaseous diffusion and gas centrifugation, are used by several nations on a multibillion doUar scale to separate partially the uranium isotopes and to produce a much more valuable fuel for nuclear power reactors. Because separation in these special processes depends upon the different rates of diffusion of the components, the processes are often referred to collectively as diffusion separation methods. There is also a thermal diffusion process used on a modest scale for the separation of heflum-group gases (qv) and on a laboratory scale for the separation of various other materials. Thermal diffusion is not discussed herein. 

Irreversible processes are mainly appHed for the separation of heavy stable isotopes, where the separation factors of the more reversible methods, eg, distillation, absorption, or chemical exchange, are so low that the diffusion separation methods become economically more attractive. Although appHcation of these processes is presented in terms of isotope separation, the results are equally vaUd for the description of separation processes for any ideal mixture of very similar constituents such as close-cut petroleum fractions, members of a homologous series of organic compounds, isomeric chemical compounds, or biological materials. 

The Tools of Proteomics A variety of methods and techniques including two-dimensional gel electrophoresis (2DE), capillary liquid chromatography, stable isotope labeling, and mass spectrometry has been developed for qualitative and quantitative protein... 

The best labeling system in this regard is isotopic labeling since it involves the minimum change from the standard initiator. Methods based on radiolabeling and stable isotopes detectable by NMR are described in Sections 3.5.4.1 and 3.5.4.2 respectively. 

Selective labeling of the initiator allows substantial enhancement of the signals of the initiator residues relative to the signals due to the backbone. Various stable isotopes have been employed in this context (including D, F, l5N and 3IP), however, most work has involved the use of 1JC-labcling (Table 3.13). The method has been reviewed.536 58 l 58 The power of the technique is illustrated by the fact that one experiment allows the determination of ... 

For quantitative work, it is necessary to estimate the concentration of 5-amino-l-(P-D-ribofuranosyl)imidazole in aqueous solution. It seems that the only available method is the Bratton-Marshall assay, which was originally developed for the estimation of arylamines in biological fluids. The principle of the method is the spectrometric estimation of a salmon-pink colored dyestuff obtained by diazotation in situ, followed by coupling with /V-( 1 -naphthyl)ethyl-enediamine.65 The only remaining problem then is to know the molar extinction of this dye because pure samples of AIRs are not available. A value of 16800 at 520 nM was obtained for the dyes prepared from a model compound, 5-amino-l-cyclohexylimidazole-4-carboxylic acid (54), which is crystalline. A comparable molar extinction can be expected for the dye prepared from imidazole 55, if the carboxyl group does not exert too much influence on the chromophore. Actually, its influence is perceptible even with the naked eye, the dyestuff prepared from 53 having a somewhat different, wine-red color, with max>520 nM. The molar extinction for 55 is 17400 at 500 nM. When the decarboxylation of 54 was conducted under mild acidic conditions (pH 4.8, 50°C, 1 hour), estimation of 5-aminoimidazole 55 by the Bratton-Marshall method led to the conclusion that the reaction was almost quantitative.66 Similar conditions for the final decarboxylation were adopted in the preparation of samples of AIRs labeled with stable isotopes.58... 

Katzenberg, M.A. 1992 Advances in stable isotope analysis of prehistoric bones. In Saunders, S.R. and Katzenberg, M.A., eds.. The Skeletal Biology of Past Peoples Research Methods. New York, Wiley-Liss 105-120. 

Two alternate methods have recently been developed and both are used in the present study. A laser probe analytical method provided the majority of the oxygen isotope data (see Kohn et al. 1996 for details on testing and developing the method). Laser probes were originally developed for the stable isotope analysis of silicates, oxides, and sulfides in ciystalline rocks (Crowe... 

Wolfe, R.R. 1984 Tracers in Metabolic Research Radioisotope and Stable Isotope/Mass Spectrometry Methods. A.R. Liss, NY. 

The development of new fiber coatings in the near future should further improve the specificity of SPME and overcome some of the observed matrix effects. Quantification by stable isotope dilution gas chromatography/mass spectrometry (GC/MS) may assist in improving analytical performance. Along with the possible application of micro LC and capillary LC columns to in-tube SPME, the development of novel derivatization methods and the potential for the analysis of fumigant pesticides, SPME appears to be a technique with a future in the analysis of pesticide residues in food. 

In magmatic processes, both parent and daughter nuclides are usually present in the solid sources, magmas and crystallizing minerals, so that (N2), which is a priori unknown, cannot be neglected. In order to solve Equation (I) for t, the age of fractionation, both terms of this equation are divided by the concentration of a stable isotope (or the activity of a long-lived isotope) of the daughter element. Such a normalization, similar to those used in other classical radiometric methods (Rb-Sr, Sm-... 

Schwarcz HP, Harmon RS, Thompson P, Ford DC (1976) Stable isotope studies of fluid inclusions in speleothems and their paleochmatic significance. Geochim Cosmochim Acta 40 657-665 Schwarcz HP, Rink WJ (2001) Dating methods for sediments of caves and rock shelters. Geoarchaeology 16 355-372... 

---