Ethers Dimethyl sulfate

Nitric acid, N-Methyl gluconamide. Acetic anhydride. Sodium bicarbonate. Methanol Dimethylurea, Nitric acid, Sulfuric acid. Methylene chloride, Sodium carbonate Anhydrous hydrazine, Cyanogen bromide, Isopropyl alcohol, Sodium nitrite, Sodium bicarbonate, Copper nitrate trihydrate, Nitric acid, Diethyl ether, Dimethyl sulfate... 

Diethylene glycol monoethyl ether Dimethyl sulfate... 

Degree one (1) includes aluminum, ethyl ether, dimethyl sulfate, sodimn hydroxide and stannic chloride. The materials in this rank often become unstable at elevated temperatures or pressures and may react with water, but not violently. 

The single largest use of methanol is in formaldehyde and dimethyl tereph-thalate production. Methanol is also used in the production of methyl acrylate, methyl methacrylate, methyl chloride, dimethyl ether, dimethyl sulfate, and other intermediates and dyes. Methanol can be used to dissolve phenolic... 

The most stable protected alcohol derivatives are the methyl ethers. These are often employed in carbohydrate chemistry and can be made with dimethyl sulfate in the presence of aqueous sodium or barium hydroxides in DMF or DMSO. Simple ethers may be cleaved by treatment with BCI3 or BBr, but generally methyl ethers are too stable to be used for routine protection of alcohols. They are more useful as volatile derivatives in gas-chromatographic and mass-spectrometric analyses. So the most labile (trimethylsilyl ether) and the most stable (methyl ether) alcohol derivatives are useful in analysis, but in synthesis they can be used only in exceptional cases. In synthesis, easily accessible intermediates of medium stability are most helpful. 

Etherification. The reaction of alkyl haUdes with sugar polyols in the presence of aqueous alkaline reagents generally results in partial etherification. Thus, a tetraaHyl ether is formed on reaction of D-mannitol with aHyl bromide in the presence of 20% sodium hydroxide at 75°C (124). Treatment of this partial ether with metallic sodium to form an alcoholate, followed by reaction with additional aHyl bromide, leads to hexaaHyl D-mannitol (125). Complete methylation of D-mannitol occurs, however, by the action of dimethyl sulfate and sodium hydroxide (126). A mixture of tetra- and pentabutyloxymethyl ethers of D-mannitol results from the action of butyl chloromethyl ether (127). Completely substituted trimethylsilyl derivatives of polyols, distillable in vacuo, are prepared by interaction with trim ethyl chi oro s il an e in the presence of pyridine (128). Hexavinylmannitol is obtained from D-mannitol and acetylene at 25.31 MPa (250 atm) and 160°C (129). 

SuIfona.tlon, Sulfonation is a common reaction with dialkyl sulfates, either by slow decomposition on heating with the release of SO or by attack at the sulfur end of the O—S bond (63). Reaction products are usually the dimethyl ether, methanol, sulfonic acid, and methyl sulfonates, corresponding to both routes. Reactive aromatics are commonly those with higher reactivity to electrophilic substitution at temperatures > 100° C. Tn phenylamine, diphenylmethylamine, anisole, and diphenyl ether exhibit ring sulfonation at 150—160°C, 140°C, 155—160°C, and 180—190°C, respectively, but diphenyl ketone and benzyl methyl ether do not react up to 190°C. Diphenyl amine methylates and then sulfonates. Catalysis of sulfonation of anthraquinone by dimethyl sulfate occurs with thaHium(III) oxide or mercury(II) oxide at 170°C. Alkyl interchange also gives sulfation. 

Later it was synthesized in a batch process from dimethyl ether and sulfur thoxide (93) and this combination was adapted for continuous operation. Gaseous dimethyl ether was bubbled at 15.4 kg/h into the bottom of a tower 20 cm in diameter and 365 cm high and filled with the reaction product dimethyl sulfate. Liquid sulfur thoxide was introduced at 26.5 kg/h at the top of the tower. The mildly exothermic reaction was controlled at 45—47°C, and the reaction product (96—97 wt % dimethyl sulfate, sulfuhc acid, and methyl hydrogen sulfate) was continuously withdrawn and purified by vacuum distillation over sodium sulfate. The yield was almost quantitative, and the product was a clear, colorless, mobile Hquid. A modified process is deschbed in Reference 94. Properties are Hsted in Table 3. 

Pyrogallol monomethyl ether has been prepared by the methylation of pyrogallol with dimethyl sulfate or methyl iodide by the decarboxylation of 2,3-dihj droxy-4-methoxy-benzoic acid and by the methylation of pyrogallol carbonate with diazomethane and subsequent hydrolysis. The method described is taken from the improved procedure of Baker and Savage for the preparation of pyrogallol monomethyl ether from o-vanillin by oxidation with hydrogen peroxide. 

In the onginal route to isoflurane, the methyl ether of tnfluoroethanol is made with dimethyl sulfate [.S] followed by careful chlorination of the methyl group to make the dichloromethyl ether. This ether is fluorinated with hydrogen fluoride and an antimony catalyst and the final step is monochlorination of the a carbon of the ethyl group [S] (equation 2)... 

As alkylating agent an alkyl halide, alkyl tosylate or dialkyl sulfate is used in most cases the latter type of reagent is often used in the preparation of methyl and ethyl ethers by employing dimethyl sulfate and diethyl sulfate respectively. Dimethyl sulfate is an excellent methylating agent, but is acutely toxic as well as carcinogenic." ... 

This ester (70 g) and diethyl carbonate (250 mg) were stirred at 90°C to 100°C while a solution of sodium ethoxide [from sodium (7.8 g) and ethanol (1 54 ml)] was added over 1 hr. During addition, ethanol was allowed to distill and after addition distillation was continued until the column heat temperature reached 124°C. After cooling the solution to 90°C, dimethyl sulfate (33 ml) was followed by a further 85 ml of diethyl carbonate. This solution was stirred and refluxed for 1 hr and then, when Ice cool, was diluted with water and acetic acid (10 ml). The malonate was isolated in ether and fractionally distilled to yield a fraction boiling at 148°C to 153°C/0.075 mm, identified as the alpha-methyl malonate. This was hydrolyzed by refluxing for 1 hr at 2.5N sodium hydroxide (350 ml) and alcohol (175 ml), excess alcohol was distilled and the residual suspension of sodium salt was acidified with hydrochloric acid to give a precipitate of the alpha-methyl malonic acid. This was decarboxylated by heating at 180°C to 200°Cfor 30 minutes and recrystallized from petroleum ether (BP 80°C to 100°C) to give 2-(2-fluoro-4-biphenylyl)propionic acid, MP 110°C to 111°C. 

A. N,N-Dimeihyljormamide-dimelhyl sulfate complex. In a 500-ml. four-necked flask equipped with mechanical stirrer, reflux condenser with calcium chloride drying tube, dropping funnel, and thermometer is placed 73 g. (1.0 mole) of dimethyl-formamide, and 126 g. (1.0 mole) of dimethyl sulfate is added dropwise with stirring at 50-60° (Note 1). After the addition is complete, the mixture is heated for another 2 hours at 70-80°. The dimethylformamide complex forms as a viscous, colorless or pale yellow ether-insoluble oil. 

The monoacetate 9a (R1 = Ac) and the diacetate 10a (R1 = R2 = Ac) are obtained by treatment of 8 with acetic anhydride in anhydrous pyridine at room temperature 4 the oxo group in position 5 of 8 is more reactive towards acetylation. Similarly, the S,S-dioxidc of 8 can be converted to the bisacetylated S,5-dioxide of 10a in 78 % yield.74 Methylation of 8 with diazomethane gives 9c (65 % yield), along with 14 % of the 3-methoxy compound 11. Other alkylation agents, such as dimethyl sulfate in the presence of potassium carbonate, selectively give 9c, albeit in lower (30 %) yield.90 The dimethyl enol ether 10c (R1 = R2 = Me) is obtained by a subsequent methylation of 9c (R1 = Me) with dimethyl sulfate and potassium teri-butoxide.90... 

Glycine ethyl ester hydrochloride, 14, 46 16, 86 17, 92 Grignard reaction in -butyl ether, 11, 84 with acetaldehyde, 12, 48 with butyl p-toluenesulfonate, 10, 4 with carbon dioxide, 11, 80 with dimethyl sulfate, 11, 66 with ethyl carbonate, 11, 98... 

Dinitro-5-methoxy-naphthol-(l), methyl-[6,8-Dinitro-5-hydroxy-naphthyl-(])] -ether). (O2N)2C10H4(0H).O.CH3, mw 264.21, N 10.61%, OB to C02 —121.12%, orange needles from CCI4, mp 173° (decompn). Sol in CCI4. Prepn from 2,4-dinitro-naphthalenediol-(l,5) by reacting with an excess of dimethyl sulfate in dil NaOH... 

The reaction of alkyl sulfates with alkoxide ions is quite similar to 10-12 in mechanism and scope. Other inorganic esters can also be used. One of the most common usages of the reaction is the formation of methyl ethers of alcohols and phenols by treatment of alkoxides or aroxides with methyl sulfate. The alcohol or phenol can be methylated directly, by treatment with dimethyl sulfate and alumina in cyclohexane. Carboxylic esters sometimes give ethers when treated with alkoxides (Bal2 mechanism, p. 473) in a very similar process (see also 10-24). 

Although it was expected that three hydroxyl groups would be methylated with dimethyl sulfate and 30% alkali, in reality four such groups reacted. This is probably due to the splitting of a cyclic ether ring under the conditions of the reaction. 

The reactions in which the methyl ketone loses a primary proton are all fast reactions, and the direction of the reaction is determined by the fact that an electron-releasing alkyl group slows down the removal of the secondary proton from the methylene group. On the other hand a slow reaction, like the base-catalyzed reaction of ketones with dimethyl sulfate in ether, gives a product corresponding to the removal of a proton from the more alkylated carbon.418... 

The value of methylation studies in structural determination of carbohydrates is well known. Methylation of sucrose has generally been achieved by the use of dimethyl sulfate-sodium hydroxide,34,35 methyl iodide-silver oxide-acetone,20 sodium hydride-methyl io-dide-N,N-dimethylformamide,35 or diazomethane-boron trifluoride etherate.36,37 The last method (already applied to monosaccharides38,39) has been found particularly useful for sucrose, because it proceeds without concomitant migration of acyl groups. The reaction of 2,3,6,T,3, 4, 6 -hepta-0-acetylsucrose (21) and 2,3,4,6,1, 3, 4 -hepta-O-acetylsucrose (22) with diazomethane in dichloromethane in the presence of a catalytic proportion of boron trifluoride etherate for 0.5 h at —5° gave the corresponding 4-methyl (23) and 6 -methyl (24)... 

Dimethyl sulfate, reaction with di-methylformamide, 47, 52 Dimethyl sulfoxide, in synthesis of phenyl f-butyl ether, 45, 89 potassium salt, preparation, 48, 109, 110... 

---