Dimethyl sulfate chloride

QuaterniZation. Quaternary ammonium compounds are formed by alkylation of alkyl, alkyl dimethyl, dialkyl, and dialkylmethyl fatty amines with methyl chloride, dimethyl sulfate, or benzyl chloride (1,3,7,12,29). 

The single largest market use for quaternary fatty amines is in fabric softeners. Monoalkyl quaternaries (chloride) have been used in Hquid detergent softener antistat formulations (LDSA), dialkyl dimethyl quaternaries (chloride) in the rinse cycle, and dialkyl dimethyl quaternaries (sulfate) as dryer softeners. 

Fats, Oils, or Fatty Acids. The primary products produced direcdy from fats, oils, or fatty acids without a nitrile iatermediate are the quatemized amidoamines, imidazolines, and ethoxylated derivatives (Fig. 3). Reaction of fatty acids or tallow with various polyamines produces the iatermediate dialkylarnidoarnine. By controlling reaction conditions, dehydration can be continued until the imidazoline is produced. Quaternaries are produced from both amidoamines and imidazolines by reaction with methyl chloride or dimethyl sulfate. The amidoamines can also react with ethylene oxide (qv) to produce ethoxylated amidoamines which are then quaternized. 

All lation. In alkylation, the dialkyl sulfates react much faster than do the alkyl haHdes, because the monoalkyl sulfate anion (ROSO ) is more effective as a leaving group than a haHde ion. The high rate is most apparent with small primary alkyl groups, eg, methyl and ethyl. Some leaving groups, such as the fluorinated sulfonate anion, eg, the triflate anion, CF SO, react even faster in ester form (4). Against phenoxide anion, the reaction rate is methyl triflate [333-27-7] dimethyl sulfate methyl toluenesulfonate [23373-38-8] (5). Dialkyl sulfates, as compared to alkyl chlorides, lack chloride ions in their products chloride corrodes and requires the use of a gas instead of a Hquid. The lower sulfates are much less expensive than lower bromides or iodides, and they also alkylate quickly. 

Oiganometallic usage is shown in the piepaiation of titanium- oi vanadium-containing catalysts foi the polymerisation of styrene or butadiene by the reaction of dimethyl sulfate with the metal chloride (145). Free-radical activity is proposed for the quaternary product from dimethylaruline and dimethyl sulfate and for the product from l,l,4,4-tetramethyl-2-tetra2ene and dimethyl sulfate (146,147). 

The most common impurities are the corresponding acid and hydroxy compound (i.e. alcohol or phenol), and water. A liquid ester from a carboxylic acid is washed with 2N sodium carbonate or sodium hydroxide to remove acid material, then shaken with calcium chloride to remove ethyl or methyl alcohols (if it is a methyl or ethyl ester). It is dried with potassium carbonate or magnesium sulfate, and distilled. Fractional distillation then removes residual traces of hydroxy compounds. This method does not apply to esters of inorganic acids (e.g. dimethyl sulfate) which are more readily hydrolysed in aqueous solution when heat is generated in the neutralisation of the excess acid. In such cases, several fractional distillations, preferably under vacuum, are usually sufficient. 

Coagulation involves the addition of chemicals to alter the physical state of dissolved and suspended solids. This facilitates their removal by sedimentation and filtration. The most common primary coagulants are alum ferric sulfate and ferric chloride. Additional chemicals that may be added to enhance coagulation include activate silica, a complex silicate made from sodium silicate, and charged organic molecules called polyelectrolytes, which include large-molecular-weight polyacrylamides, dimethyl-diallylammonium chloride, polyamines, and starch. 

Angier and Marsico followed the course of alkylation first. The 7-dimethylamino-5-methylmercapto derivative reacted with dimethyl sulfate in an alkaline medium to yield a mixture of the 2- and 3-methyl derivatives. The reaction of the 7-diraethylamino derivative with ethyl iodide in an alkaline medium led to a mixture of all three possible monoethyl derivatives. The position of the alkyl group in all these substances was defined by comparing the UV spectra with derivatives prepared by a straightforward synthesis. After reacting the mercuric salts with tri-0-benzoylribofuranosyl chloride, they demonstrated the ribose residue to be bound in position 2. The same structure was shown to be valid for the derivative prepared by Andrews and Barber. ... 

Alkylation at the ind-N of l,2,3,4-tetrahydro-j8-carbolines has been carried out with alkyl halide after treatment with sodamide in the usual manner. Cyanoethylation of a p /r-V-substituted tetrahydro-jS-carboline in the presence of Triton B yields the corresponding 9-cyanoethyl derivative. Similarly, treatment of p / -V-methyl-l,2,3,4,4a,9b-hexahydro-y-carboline with sodamide, followed by benzyl chloride, leads to the ind-A -benzyl-substituted derivatives. l-Oxo-l,2,3,4-tetrahydro-j8-carboline yields the ind-A -methyl derivative directly with dimethyl sulfate.Prolonged treatment with sodium hydride, followed by methyl iodide, yields the 2,9-dimethyl derivative. Heating with sodium hydride in acetone followed by the addition of dimethyl sulfate gives rise to the ind-V-methyl derivative. ... 

A 90 X 6 cm column was packed with 2 kg of granular Amberlite IRA-410 resin in the chloride form (a vinylpyridine/divinylbenzene copolymer quaternized with dimethyl sulfate and converted to chloride) and washed with 3 kg of a 10% aqueous solution of sodium... 

Nitric add Dimethyl sulfate Thionyl chloride Hydrogen Chlorine... 

Phenylacetonitrile Sec-Butyl bromide Thionyl chloride Dimethyl sulfate... 

Phenylacetonitrile is alkylated with secondary butyl bromide and the resultant nitrile is hydrolyzed to 3-methyl-2-phenylvaleric acid. The acid is converted to the acid chioride with thionyl chloride and the acid chloride is in turn reacted with 1-methyl-4-piperidinol. Finally dimethyl sulfate is reacted with the ester. 

Dimethyl sulfate Methyl chloride Sodium hydroxide... 

A. N,N-Dimeihyljormamide-dimelhyl sulfate complex. In a 500-ml. four-necked flask equipped with mechanical stirrer, reflux condenser with calcium chloride drying tube, dropping funnel, and thermometer is placed 73 g. (1.0 mole) of dimethyl-formamide, and 126 g. (1.0 mole) of dimethyl sulfate is added dropwise with stirring at 50-60° (Note 1). After the addition is complete, the mixture is heated for another 2 hours at 70-80°. The dimethylformamide complex forms as a viscous, colorless or pale yellow ether-insoluble oil. 

Dimethylpiienylthiourea, 46, 70 Dimethylphosphine, 46, 103 Dimethylphosphimc acid, 46, 103 Dimethylphosphinyl chloride, 46, 103 Dimethyl sulfate, reaction with di-... 

Quaternary ammonium salts of 1-acryloy 1-4-methyl piperazine can be prepared by methylation with methyl chloride and dimethyl sulfate. These monomers can be polymerized by means of radical polymerization, either alone or with a comonomer [617]. A useful comonomer with appropriate monomer reactivity ratios is acrylamide. 

Condensation of 2,4-dihydroxypropiophenone (172) with benzoyl chloride and sodium benzoate goes to afford chromone 174, probably via ester 173. This procedure is known as the Kostanecki-Robinson reaction Methylation (175) of the remaining phenolic function by means of dimethyl sulfate, followed by reaction... 

Berberine (15) was demethylenated and demethylated by heating with aluminum chloride to give berberoline (70), which was methylated with dimethyl sulfate to afford palmatine (64) (Scheme 17) (57). 

Levi, Hawkins and Hibbert6 have recently confirmed the structure for L. mesenteroides dextran proposed by Fowler, Buckland, Brauns and Hibbert.34 Completely methylated dextran in an over-all yield of 71% was obtained by three methylations with dimethyl sulfate and sodium hydroxide, followed by six modified Muskat methylations. The methylated dextran was hydrolyzed at 140° with methanolic hydrogen chloride, and the mixture of methylated glucosides, obtained in 95% yield, was quantitatively separated by fractional distillation. 2,3-Di-methyl-D-glucose was identified by means of the phenylhydrazide of the corresponding D-gluconic acid. 

Sulfate de Dimethyle Sulfate de Methyle Sulfate Dimethylique Sulfato de Dimetilo Sulfinyl Chloride Sulfinyl Dichloride Sulfocarbonic Anhydride Sulfonal... 

This procedure represents the most convenient synthesis of 3(5)-aminopyrazole. It employs readily available starting materials and gives excellent yields in all steps.5,6 />-Toluene-sulfonyl chloride can be replaced by other arenesulfonyl chlorides. 3-Imino-l-arylsulfonylpyrazolidines can be alkylated with dimethyl sulfate or with alkyl 7>-toluenesulfonates in dimethyl-formamide to give salts of l-alkyl-2-arylsulfonyl-5-amino-4-... 

Interestingly, deprotonation of the 3-oxo-pyrrolo[l,2-f]oxazole 277 with r-BuLi at —78°C took place at the C-5 position. Addition of an electrophile provided the substituted products 278 in good yields. Stannyl and silyl chlorides, dimethyl sulfate, ketones, and benzaldehyde were successfully used as electrophiles. A significant feature of this lithiation-substitution reaction is the generally high Ar-diastereoselectivity only single diastereomers of products were isolated (Scheme 41) <2001JA315>. 

---