Detector flow injection analysis

Nonchromatographic separation coupled to atomic detectors Flow injection analysis (FIA) strategies may provide an efficient, continuous, and automatic method for preconcentration and/or separation of the sought species from a complex matrix, prior to its final determination. Furthermore, FIA systems can be interfaced easily with atomic detectors making them very convenient in speciation analysis. A typical application is selective preconcentration on... 

Flow injection analysis (FIA) was developed in the mid-1970s as a highly efficient technique for the automated analyses of samples. °> Unlike the centrifugal analyzer described earlier in this chapter, in which samples are simultaneously analyzed in batches of limited size, FIA allows for the rapid, sequential analysis of an unlimited number of samples. FIA is one member of a class of techniques called continuous-flow analyzers, in which samples are introduced sequentially at regular intervals into a liquid carrier stream that transports the samples to the detector. ... 

A graph showing the detector s response as a function of time in a flow injection analysis. 

Two examples of dual-channel manifolds for use In flow Injection analysis where R1 and R2 are reagent reservoirs P Is the pump S Is the sample I Is the Injector B Is a bypass loop W Is waste C Is the mixing and reaction coll and D Is the detector. 

A sensitive method for the flow injection analysis of Cu + is based on its ability to catalyze the oxidation of di-2-pyridyl ketone hydrazone (DPKH) by atmospheric oxygen. The product of the reaction is fluorescent and can be used to generate a signal when using a fluorometer as a detector. The yield of the reaction is at a maximum when the solution is made basic with NaOH. The fluorescence, however, is greatest in the presence of HCl. Sketch an FIA manifold that will be appropriate for this analysis. 

Enzyme linked electrochemical techniques can be carried out in two basic manners. In the first approach the enzyme is immobilized at the electrode. A second approach is to use a hydrodynamic technique, such as flow injection analysis (FIAEC) or liquid chromatography (LCEC), with the enzyme reaction being either off-line or on-line in a reactor prior to the amperometric detector. Hydrodynamic techniques provide a convenient and efficient method for transporting and mixing the substrate and enzyme, subsequent transport of product to the electrode, and rapid sample turnaround. The kinetics of the enzyme system can also be readily studied using hydrodynamic techniques. Immobilizing the enzyme at the electrode provides a simple system which is amenable to in vivo analysis. 

Sample preparation, injection, calibration, and data collection, must be automated for process analysis. Methods used for flow injection analysis (FLA) are also useful for reliable sampling for process LC systems.1 Dynamic dilution is a technique that is used extensively in FIA.13 In this technique, sample from a loop or slot of a valve is diluted as it is transferred to a HPLC injection valve for analysis. As the diluted sample plug passes through the HPLC valve it is switched and the sample is injected onto the HPLC column for separation. The sample transfer time typically is determined with a refractive index detector and valve switching, which can be controlled by an integrator or computer. The transfer time is very reproducible. Calibration is typically done by external standardization using normalization by response factor. Internal standardization has also been used. To detect upsets or for process optimization, absolute numbers are not always needed. An alternative to... 

The 1/16" x 0.02" i.d. transfer line also functioned as a sample dilution device in other applications, a stainless steel column packed with glass beads has been found to be useful for dilution. This simple dynamic dilution technique has been used extensively in flow injection analysis.3 A refractive index detector is typically used to measure the sample transfer time. As shown in Figure 4, approximately 5 minutes is required to transfer the sample plug to the Rheodyne valve. As the apex of the sample band passes though the Rheodyne valve, the valve is activated and 1 pi injected onto the liquid chromatographic column. The sample transfer time was checked periodically over 1 year of operation and found to be stable. 

Another interesting development, in which continuous flow was combined with discrete sample titration, is continuous flow titration by means of flow injection analysis (FIA) according to Ruzicka and co-workers70. Fig. 5.16 shows a schematic diagram of flow injection titration, where P is a peristaltic pump, S the sample injected into the carrier stream of diluent (flow-rate fA), G a gradient chamber of volume V, R the coil into which the titrant is pumped (flow-rate fB), D the detector and W waste. 

Numata, M., Funazaki, N., Ito, S., Asano, Y., and Yano, Y., Flow injection analysis for hypoxanthine in meat with dissolved oxygen detector and enzyme reactor, Talanta, 43,2053,1996. 

Fast Fourier Transform Flow Injection Analysis Field Ion Atom Probe Flame-Ionization Detector Field Ion Microscopy... 

Figure 2.5. Analytical manifolds for the determination of phosphate by flow injection analysis (a) and reverse flow injection (b). The symbols S, M, and A are the seawater, mixed reagent, and the ascorbic acid solutions. The pump injection valve and detector are represented by P, I, and D, respectively. W = waste. From [177]... 

The great boost of analytical CL appeared soon after the discovery of flow injection analysis (FTA) by Ruzicka and Hansen [3], The speed with which the solutions of reagents can be supplied to the detector proved to be the best for CL reactions. Various mixing coils were investigated and this was the beginning of an avalanche of research on CL [4],... 

A more recent development is a technique known as flow injection analysis, in which a discrete volume of a liquid sample is injected into a carrier stream. Reagents required for the development of the analytical property of the analyte, e g. colour developing reagents for spectrophotometry, are already present in the stream. The stream then flows straight to the detector and the technique depends upon the controlled and reproducible dispersion of the sample as it passes through the reaction zone. Thus the reaction does not necessarily need to develop to completion,... 

Steve Kruse of the City of Lincoln, Nebraska, Waste-water Treatment Plant Laboratory examines a faulty detector module taken from the flow injection analysis system in use in the laboratory. 

AgN03 = silver nitrate CICN = cyanogen chloride CN" = cyanide ion CNATC = cyanides not amenable to chlorination (Rosentreter and Skogerboe 1992) AAS = atomic absorption spectroscopy EPA = Environmental Protection Agency FIA = flow injection analysis GC/ECD = gas chromatograph/electron capture detector HCN = hydrogen cyanide NaOH = sodium hydroxide NIOSH = National Institute for Occupational Safety and Health... 

Figure 6.11 Examples of Tecator Chemifold types for flow injection analysis. S, sample injection port C, carrier stream R1 R2, R3, reagent streams D, detector W, waste.

Because of its advantages (high sensitivity and selectivity, low cost and miniaturization) amperometric detection has been frequently used in flow injection analysis (FIA) and RP-HPLC. However, it has been established that the peak area (detector response) considerably depends on the flow rate. A general approach has been proposed to predict the effect of flow rate on the peak area in FIA and RP-HPLC. The general form of the correlation describing the flow in a parallel plate cell with short rectangular electrodes is... 

Sometimes it is not necessary to use the selectivity of a chromatographic technique. Sensitive analysis can sometimes be achieved with selective detection in flow injection analysis (FIA). Whilst some of the detectors described below may be appropriate in themselves in favourable cases, in most cases more sophisticated detection regimes are necessary, such as post-injection derivatisation of the analyte. Strategies involving some of the derivatisation methods outlined in Section 4.9.2 may be considered. 

Gas-diffusion flow injection analysis is capable of detecting very low concentrations of chlorine dioxide in water (i.e., detection limit is 5 ppb). A chemiluminescence flow-through detector cell is used to measure the concentration chlorine dioxide as a function of chemiluminescence intensity. A gas diffusion membrane separates the donor stream from the detecting stream and removes ionic interferences from iron and manganese compounds, as well as from other oxychlorinated compounds, such as chlorate and chlorite (Hollowell et al. 1986 Saksa and Smart 1985). 

Environmental Protection Agency (USA) emergency response guidebook electron spin resonance field desorption mass spectrometry flow injection analysis flame ionization detection/detector fluorescence detection/detector Xylenol Orange-ferric complex final ozonide... 

Cosio et al. (2006) used an electronic tongue system based on flow injection analysis (FIA) with two amperometric detectors, together with the use of an electronic nose, in order to classify olive oil samples on the basis of their geographical origin. Counter-propagation maps were used as classification tools. 

In flow injection analysis, a sample is injected into a moving liquid stream to which various reagents can be added. After a suitable time, the reacted sample reaches a detector, which is usually a spectrophotometric cell. Flow injection is widely used in medical and pharmaceutical analysis, water analysis, and industrial process control. 

---