Cobalt metal ions

In humans, vitamin Bi2 participates in two reactions only, but they are essential to life. Humans who cannot absorb vitamin Bi2 die of pernicious anemia if untreated (now by injection of the vitamin formerly by eating large amounts of raw liver). Vitamin B]2 contains a cobalt metal ion bound to a porphyrin ring. Cobalt normally forms six coordinate bonds. Besides the four bonds to the nitrogens of the porphyrin, one bond is to a ring nitrogen of dimethylbenzamidine. The final bond is to a cyanide ion in the vitamin, or to the 5 carbon of adenosine in the active coenzyme. 

In the previous section efficient catalysis of the Diels-Alder reaction by copper(II)nitrate was encountered. Likewise, other bivalent metal ions that share the same row in the periodic system show catalytic activity. The effects of cobalt(II)nitrate, nickel(II)nitrate, copper(II)nitrate and zinc(ll)nitrate... 

BackTitrations. In the performance of aback titration, a known, but excess quantity of EDTA or other chelon is added, the pH is now properly adjusted, and the excess of the chelon is titrated with a suitable standard metal salt solution. Back titration procedures are especially useful when the metal ion to be determined cannot be kept in solution under the titration conditions or where the reaction of the metal ion with the chelon occurs too slowly to permit a direct titration, as in the titration of chromium(III) with EDTA. Back titration procedures sometimes permit a metal ion to be determined by the use of a metal indicator that is blocked by that ion in a direct titration. Eor example, nickel, cobalt, or aluminum form such stable complexes with Eriochrome Black T that the direct titration would fail. However, if an excess of EDTA is added before the indicator, no blocking occurs in the back titration with a magnesium or zinc salt solution. These metal ion titrants are chosen because they form EDTA complexes of relatively low stability, thereby avoiding the possible titration of EDTA bound by the sample metal ion. 

Butane-Naphtha Catalytic Liquid-Phase Oxidation. Direct Hquid-phase oxidation ofbutane and/or naphtha [8030-30-6] was once the most favored worldwide route to acetic acid because of the low cost of these hydrocarbons. Butane [106-97-8] in the presence of metallic ions, eg, cobalt, chromium, or manganese, undergoes simple air oxidation in acetic acid solvent (48). The peroxidic intermediates are decomposed by high temperature, by mechanical agitation, and by action of the metallic catalysts, to form acetic acid and a comparatively small suite of other compounds (49). Ethyl acetate and butanone are produced, and the process can be altered to provide larger quantities of these valuable materials. Ethanol is thought to be an important intermediate (50) acetone forms through a minor pathway from isobutane present in the hydrocarbon feed. Formic acid, propionic acid, and minor quantities of butyric acid are also formed. 

Reactions of the Hydroxyl Group. The hydroxyl proton of hydroxybenzaldehydes is acidic and reacts with alkahes to form salts. The lithium, sodium, potassium, and copper salts of sahcylaldehyde exist as chelates. The cobalt salt is the most simple oxygen-carrying synthetic chelate compound (33). The stabiUty constants of numerous sahcylaldehyde—metal ion coordination compounds have been measured (34). Both sahcylaldehyde and 4-hydroxybenzaldehyde are readily converted to the corresponding anisaldehyde by reaction with a methyl hahde, methyl sulfate (35—37), or methyl carbonate (38). The reaction shown produces -anisaldehyde [123-11-5] in 93.3% yield. Other ethers can also be made by the use of the appropriate reagent. 

Diacyl peroxide decompositions also are cataly2ed by the metal ions of copper, iron, cobalt, and manganese ... 

Most of the heavy-metal impurities present in 2inc salt solutions must be removed before the precipitation reaction, or these form insoluble colored sulfides that reduce the whiteness of the 2inc sulfide pigment. This end is usually achieved by the addition of 2inc metal which reduces most heavy-metal ions to their metallic form. The brightness of 2inc sulfide can be improved by the addition of a small amount of cobalt salts (ca 0.04% on a Co/Zn basis) (20). Barium sulfate [7727-43-7] formed in the first step is isolated and can be used as an extender. 

The extraction of metal ions depends on the chelating ability of 8-hydroxyquinoline. Modification of the stmcture can improve its properties, eg, higher solubility in organic solvents (91). The extraction of nickel, cobalt, copper, and zinc from acid sulfates has been accompHshed using 8-hydroxyquinohne in an immiscible solvent (92). In the presence of oximes, halo-substituted 8-hydroxyquinolines have been used to recover copper and zinc from aqueous solutions (93). Dilute solutions of heavy metals such as mercury, ca dmium, copper, lead, and zinc can be purified using quinoline-8-carboxyhc acid adsorbed on various substrates (94). 

Metals. Transition-metal ions, such as iron, copper, manganese, and cobalt, when present even in small amounts, cataly2e mbber oxidative reactions by affecting the breakdown of peroxides in such a way as to accelerate further attack by oxygen (36). Natural mbber vulcani2ates are especially affected. Therefore, these metals and their salts, such as oleates and stearates, soluble in mbber should be avoided. 

Metal-Catalyzed Oxidation. Trace quantities of transition metal ions catalyze the decomposition of hydroperoxides to radical species and greatiy accelerate the rate of oxidation. Most effective are those metal ions that undergo one-electron transfer reactions, eg, copper, iron, cobalt, and manganese ions (9). The metal catalyst is an active hydroperoxide decomposer in both its higher and its lower oxidation states. In the overall reaction, two molecules of hydroperoxide decompose to peroxy and alkoxy radicals (eq. 5). 

The reactive species that iaitiate free-radical oxidatioa are preseat ia trace amouats. Exteasive studies (11) of the autoxidatioa mechanism have clearly estabUshed that the most reactive materials are thiols and disulfides, heterocycHc nitrogen compounds, diolefins, furans, and certain aromatic-olefin compounds. Because free-radical formation is accelerated by metal ions of copper, cobalt, and even iron (12), the presence of metals further compHcates the control of oxidation. It is difficult to avoid some metals, particularly iron, ia fuel systems. 

Chromium is the principal metal used with mordant dyes for wool, whereas both chromium and cobalt are used extensively ia premetallized types for wool and nylon. Copper(II) is employed almost exclusively as the chelating metal ion ia both metaUizable and premetallized direct dyes for cotton. 

Even very small amounts of transition-metal ions like cobalt, nickel, and copper cause rapid decomposition. They form reactive intermediates that can decrease the stabiUty of oxidizable compounds in the bleach solution and increase the damage to substrates. Hypochlorite is also decomposed by uv light (24,25). Acidic solutions also lose available chlorine by the reverse of equations 1 and 2. 

Metal Extraction. As with other carboxyhc acids, neodecanoic acid can be used in the solvent extraction of metal ions from aqueous solutions. Recent appHcations include the extraction of zinc from river water for deterrnination by atomic absorption spectrophotometry (105), the coextraction of metals such as nickel, cobalt, and copper with iron (106), and the recovery of copper from ammoniacal leaching solutions (107). 

Cobalt exists in the +2 or +3 valence states for the majority of its compounds and complexes. A multitude of complexes of the cobalt(III) ion [22541-63-5] exist, but few stable simple salts are known (2). Werner s discovery and detailed studies of the cobalt(III) ammine complexes contributed gready to modem coordination chemistry and understanding of ligand exchange (3). Octahedral stereochemistries are the most common for the cobalt(II) ion [22541-53-3] as well as for cobalt(III). Cobalt(II) forms numerous simple compounds and complexes, most of which are octahedral or tetrahedral in nature cobalt(II) forms more tetrahedral complexes than other transition-metal ions. Because of the small stabiUty difference between octahedral and tetrahedral complexes of cobalt(II), both can be found in equiUbrium for a number of complexes. Typically, octahedral cobalt(II) salts and complexes are pink to brownish red most of the tetrahedral Co(II) species are blue (see Coordination compounds). 

Ceitain acid dyes can have thek fastness piopeities impioved by combining the dye with a metal atom (chelation). The most common metal is chromium, although cobalt is sometimes used, and this can be introduced in a number of ways. The basic mechanism is donation of electron pans by groups in the dye (ligands) to a metal ion. For example, has a coordination number of 6, and therefore will accept six lone pans of electrons. Typical ligand groups... 

Despite the weak basicity of isoxazoles, complexes of the parent methyl and phenyl derivatives with numerous metal ions such as copper, zinc, cobalt, etc. have been described (79AHC(25) 147). Many transition metal cations form complexes with Imidazoles the coordination number is four to six (70AHC(12)103). The chemistry of pyrazole complexes has been especially well studied and coordination compounds are known with thlazoles and 1,2,4-triazoles. Tetrazole anions also form good ligands for heavy metals (77AHC(21)323). 

Manganese, copper, iron, cobalt and nickel ions can all initiate oxidation. Untinned copper wire can have a catastrophic effect on natural rubber compounds with which it comes into contact. Inert fillers for use in rubbers are usually tested for traces of such metal ions, particularly copper and manganese. The problem is perhaps less serious in saturated hydrocarbon polymers but still exists. 

Metal ion complexation rates have been studied by the T-jump method. ° Divalent nickel and cobalt have coordination numbers of 6, so they can form complexes ML with monodentate ligands L with n = 1—6 or with bidentate ligands, n = 1-3. The ligands are Bronsted bases, and only the conjugate base form undergoes coordination with the metal ion. The complex formation reaction is then... 

Some enzymes require metal ions - such as cobalt, manganese or zinc - for their activity if these are removed by the ionic liquid by complexation, enzyme inactivation may occur. 

In the pulp and paper industry, anionic and cationic acrylamide polymers are used as chemical additives or processing aids. The positive effect is achieved due to a fuller retention of the filler (basically kaoline) in the paper pulp, so that the structure of the paper sheet surface layer improves. Copolymers of acrylamide with vi-nylamine not only attach better qualities to the surface layer of.paper, they also add to the tensile properties of paper in the wet state. Paper reinforcement with anionic polymers is due to the formation of complexes between the polymer additive and ions of Cr and Cu incorporated in the paper pulp. The direct effect of acrylamide polymers on strength increases and improved surface properties of paper sheets is accompanied by a fuller extraction of metallic ions (iron and cobalt, in addition to those mentioned above), which improves effluent water quality. 

Transition metal ions. Transition metal ions impart color to many of their compounds and solutions, (a) Bottom row (left to right) iron(lll) chloride. copper ll) sulfate, manganese(ll) chloride, cobalt(ll) chloride. Top row (left to right) chromium(lll) nitrate, iron(ll) sulfate, nickel(ll) sulfate, potassium dichromate, (b) Solutions of the compounds in (a) in the order listed above. 

When permanganate ions in aqueous solution react with cobalt metal in strong add, the equation for the reaction that takes place is... 

When, however, the ligand molecule or ion has two atoms, each of which has a lone pair of electrons, then the molecule has two donor atoms and it may be possible to form two coordinate bonds with the same metal ion such a ligand is said to be bidentate and may be exemplified by consideration of the tris(ethylenediamine)cobalt(III) complex, [Co(en)3]3+. In this six-coordinate octahedral complex of cobalt(III), each of the bidentate ethylenediamine molecules is bound to the metal ion through the lone pair electrons of the two nitrogen atoms. This results in the formation of three five-membered rings, each including the metal ion the process of ring formation is called chelation. 

The method may also be applied to the analysis of silver halides by dissolution in excess of cyanide solution and back-titration with standard silver nitrate. It can also be utilised indirectly for the determination of several metals, notably nickel, cobalt, and zinc, which form stable stoichiometric complexes with cyanide ion. Thus if a Ni(II) salt in ammoniacal solution is heated with excess of cyanide ion, the [Ni(CN)4]2 ion is formed quantitatively since it is more stable than the [Ag(CN)2] ion, the excess of cyanide may be determined by the Liebig-Deniges method. The metal ion determinations are, however, more conveniently made by titration with EDTA see the following sections. 

Murexide forms complexes with many metal ions only those with Cu, Ni, Co, Ca and the lanthanides are sufficiently stable to find application in analysis. Their colours in alkaline solution are orange (copper), yellow (nickel and cobalt), and red (calcium) the colours vary somewhat with the pH of the solution. 

The tautomerization is induced by cobalt(II) which forms the thermodynamically more stable metalatcd hydroporphyrins from which the cobalt can be removed using trifluoroacctic acid under kinetic control. Experiments with porphyrinogen and hexahydroporphyrin show that the porphyrinogen-hexahydroporphyrin equilibrium can be shifted by complexation of porphyrinogen with metal ions to the more stable metal hexahydroporphyrins and that metal-free hexahydroporphyrins tautomerize back to the more stable metal-free porphyrinogens.29... 

Vitamin B12 (Fig. 1) is defined as a group of cobalt-containing conoids known as cobalamins. The common features of the vitamers are a corrin ting (four reduced pyrrole rings) with cobalt as the central atom, a nucleotide-like compound and a variable ligand. Vitamin B12 is exceptional in as far as it is the only vitamin containing a metal-ion. The vitamers present in biological systems are hydroxo-, aquo-, methyl-, and 5 -deoxyadenosylcobalamin. 

Similarly, when catalyzed the reaction rate decreases significantly as a function of pH level. The optimum reaction pH level is approximately 9.5 to 10.5. Iron, and especially copper, in the boiler may act as adventitious catalysts. However, as metal transport polymers are frequently employed, iron, copper, or cobalt may be transported away from contact with sulfite, and thus are not available for catalysis. (This may be a serious problem in high-pressure units employing combinations of organic oxygen scavengers and metal ion catalysts.)... 

---