Metal ions cobalt complexes

A novel method has been proposed [203-205] for obtaining polymeric sorbents with prearranged macromolecular sites for complexing with transition metal ions. Cobalt complexes with the prearranged sorbent were tested as catalysts by the liquid-phase oxidation of styrene and ethylbenzene. These catalysts could be used repeatedly without a decrease in activity. The catalytic activity of polyacrylonitrile and polypropargyl methacrylate complexes with Co was studied during ethylbenzene oxidation reactions [206, 207]. 

Metal ion complexation rates have been studied by the T-jump method. ° Divalent nickel and cobalt have coordination numbers of 6, so they can form complexes ML with monodentate ligands L with n = 1—6 or with bidentate ligands, n = 1-3. The ligands are Bronsted bases, and only the conjugate base form undergoes coordination with the metal ion. The complex formation reaction is then... 

Hydrolysis of coordinated ligands is a special case of nucleophilic attack. Two examples involving inorganic ligands have already been given in Section II. A on aquation of cobalt(III) complexes. Many further examples will be found in the following Section VII.B on catalysis of hydrolysis of organic substrates by metal ions and complexes. 

The structure of cobalamin is more complex than that of folic acid (Figure 15.2 and 15.3). At its heart is a porphyrin ring containing the metal ion cobalt at its centre. In catalytic reactions the cobalt ion forms a bond with the one-carbon group, which is then transferred from one compound to another. Vitamin B12 is the prosthetic group of only two enzymes, methylmalonyl-CoAmutase and methionine synthase. The latter enzyme is particularly important, as it is essential for the synthesis of nucleotides which indicates the importance of vitamin B12 in maintenance of good health. 

Metal-ion catalysis has been extensively reviewed (Martell, 1968 Bender, 1971). It appears that metal ions will not affect ester hydrolysis reactions unless there is a second co-ordination site in the molecule in addition to the carbonyl group. Hence, hydrolysis of the usual types of esters is not catadysed by metal ions, but hydrolysis of amino-acid esters is subject to catalysis, presumably by polarization of the carbonyl group (KroU, 1952). Cobalt (II), copper (II), and manganese (II) ions promote hydrolysis of glycine ethyl ester at pH 7-3-7-9 and 25°, conditions under which it is otherwise quite stable (Kroll, 1952). The rate constants have maximum values when the ratio of metal ion to ester concentration is unity. Consequently, the most active species is a 1 1 complex. The rate constant increases with the ability of the metal ion to complex with 2unines. The scheme of equation (30) was postulated. The rate of hydrolysis of glycine ethyl... 

The resultant hydroxyl radicals are effective in initiating many chain reactions. The number of metal ions and complexes which are capable of activating hydrogen peroxide in this manner is quite large and is determined in part by the redox potentials of the activator. Related systems in which free radicals are generated by the intervention of suitable metallic catalysts include many in which oxygen is consumed in autoxidations. Cobalt(H) compounds which act as oxygen carriers can often activate radicals in such systems by reactions of the type ... 

Two-electron reduction of dioxygen into coordinated peroxide can be easily performed by two metal centers undergoing concomitant one-electron oxidations, as shown in Equation 4.4 (Section 4.2.2). A variety of transition metal ions (cobalt, nickel, iron, manganese, copper, etc.) can form dinuclear peroxides. These complexes differ in structure (cA-p-1,2-peroxides, trans- l- 1,2-peroxides, p-r 2 r 2-peroxides), in stability and subsequent reactivity modes, and in the protonation state of the peroxo ligands (Figure 4.3). In certain cases, dinuclear p-r 2 r 2-peroxides and bis-p-oxo diamond core complexes interconvert, as discussed below for copper-dioxygen adducts. 

However, the same ruthenium complex will promote the cleavage of DNA under nonoxidative conditions as well. Barton and coworkers find that divalent metal ions (cobalt, zinc, cadmium, lead), when added to the... 

Description. Vitamin B12 is the largest and most complex of all the vitamins. It is unique among vitamins in that it contains a metal ion, cobalt. For this reason cobalamin is the term used to refer to compounds having B12 activity. Methylcobalamin and 5-deoxyadenosyl cobalamin are the forms of vitamin B12 used in the human body. The form of cobalamin used in most supplements, cyano-cobalamin, is readily converted to 5-deoxyadenosyl and methylcobalamin. 

Various metal ions and complexes have been used to promote the catalytic air oxidation of hydrocarbons. There are some classical reactions that have developed into commercial processes, like the oxidation of n-butane to acetic acid, the oxidation of cyclohexane to adipic acid, or of p-xylene to terephthalic acid, all of which utilize cobalt salts as catalysts. 

In the former case, polymers were assembled by complexation of a pyridyl-substituted porphyrin with the hexacoordinate metal ion, cobalt(II). The resulting supramolecular polymers, (60) (Figure 37), were characterized by UV/vis spectroscopy, NMR diffusion studies, and SEC. Polymers with concentration-dependent molecular weights up to 136 kDa (DP 100) formed, as indicated by SEC data. The dynamic nature of polymer formation was implied in the concentration dependence of the molecular weights as well as in capping studies with a porphyrin chain stopper [122],... 

BackTitrations. In the performance of aback titration, a known, but excess quantity of EDTA or other chelon is added, the pH is now properly adjusted, and the excess of the chelon is titrated with a suitable standard metal salt solution. Back titration procedures are especially useful when the metal ion to be determined cannot be kept in solution under the titration conditions or where the reaction of the metal ion with the chelon occurs too slowly to permit a direct titration, as in the titration of chromium(III) with EDTA. Back titration procedures sometimes permit a metal ion to be determined by the use of a metal indicator that is blocked by that ion in a direct titration. Eor example, nickel, cobalt, or aluminum form such stable complexes with Eriochrome Black T that the direct titration would fail. However, if an excess of EDTA is added before the indicator, no blocking occurs in the back titration with a magnesium or zinc salt solution. These metal ion titrants are chosen because they form EDTA complexes of relatively low stability, thereby avoiding the possible titration of EDTA bound by the sample metal ion. 

Cobalt exists in the +2 or +3 valence states for the majority of its compounds and complexes. A multitude of complexes of the cobalt(III) ion [22541-63-5] exist, but few stable simple salts are known (2). Werner s discovery and detailed studies of the cobalt(III) ammine complexes contributed gready to modem coordination chemistry and understanding of ligand exchange (3). Octahedral stereochemistries are the most common for the cobalt(II) ion [22541-53-3] as well as for cobalt(III). Cobalt(II) forms numerous simple compounds and complexes, most of which are octahedral or tetrahedral in nature cobalt(II) forms more tetrahedral complexes than other transition-metal ions. Because of the small stabiUty difference between octahedral and tetrahedral complexes of cobalt(II), both can be found in equiUbrium for a number of complexes. Typically, octahedral cobalt(II) salts and complexes are pink to brownish red most of the tetrahedral Co(II) species are blue (see Coordination compounds). 

Despite the weak basicity of isoxazoles, complexes of the parent methyl and phenyl derivatives with numerous metal ions such as copper, zinc, cobalt, etc. have been described (79AHC(25) 147). Many transition metal cations form complexes with Imidazoles the coordination number is four to six (70AHC(12)103). The chemistry of pyrazole complexes has been especially well studied and coordination compounds are known with thlazoles and 1,2,4-triazoles. Tetrazole anions also form good ligands for heavy metals (77AHC(21)323). 

Some enzymes require metal ions - such as cobalt, manganese or zinc - for their activity if these are removed by the ionic liquid by complexation, enzyme inactivation may occur. 

In the pulp and paper industry, anionic and cationic acrylamide polymers are used as chemical additives or processing aids. The positive effect is achieved due to a fuller retention of the filler (basically kaoline) in the paper pulp, so that the structure of the paper sheet surface layer improves. Copolymers of acrylamide with vi-nylamine not only attach better qualities to the surface layer of.paper, they also add to the tensile properties of paper in the wet state. Paper reinforcement with anionic polymers is due to the formation of complexes between the polymer additive and ions of Cr and Cu incorporated in the paper pulp. The direct effect of acrylamide polymers on strength increases and improved surface properties of paper sheets is accompanied by a fuller extraction of metallic ions (iron and cobalt, in addition to those mentioned above), which improves effluent water quality. 

When, however, the ligand molecule or ion has two atoms, each of which has a lone pair of electrons, then the molecule has two donor atoms and it may be possible to form two coordinate bonds with the same metal ion such a ligand is said to be bidentate and may be exemplified by consideration of the tris(ethylenediamine)cobalt(III) complex, [Co(en)3]3+. In this six-coordinate octahedral complex of cobalt(III), each of the bidentate ethylenediamine molecules is bound to the metal ion through the lone pair electrons of the two nitrogen atoms. This results in the formation of three five-membered rings, each including the metal ion the process of ring formation is called chelation. 

The method may also be applied to the analysis of silver halides by dissolution in excess of cyanide solution and back-titration with standard silver nitrate. It can also be utilised indirectly for the determination of several metals, notably nickel, cobalt, and zinc, which form stable stoichiometric complexes with cyanide ion. Thus if a Ni(II) salt in ammoniacal solution is heated with excess of cyanide ion, the [Ni(CN)4]2 ion is formed quantitatively since it is more stable than the [Ag(CN)2] ion, the excess of cyanide may be determined by the Liebig-Deniges method. The metal ion determinations are, however, more conveniently made by titration with EDTA see the following sections. 

Murexide forms complexes with many metal ions only those with Cu, Ni, Co, Ca and the lanthanides are sufficiently stable to find application in analysis. Their colours in alkaline solution are orange (copper), yellow (nickel and cobalt), and red (calcium) the colours vary somewhat with the pH of the solution. 

The tautomerization is induced by cobalt(II) which forms the thermodynamically more stable metalatcd hydroporphyrins from which the cobalt can be removed using trifluoroacctic acid under kinetic control. Experiments with porphyrinogen and hexahydroporphyrin show that the porphyrinogen-hexahydroporphyrin equilibrium can be shifted by complexation of porphyrinogen with metal ions to the more stable metal hexahydroporphyrins and that metal-free hexahydroporphyrins tautomerize back to the more stable metal-free porphyrinogens.29... 

Much research focuses on the structures, properties, and uses of the complexes formed between d-metal ions acting as Lewis acids and a variety of Lewis bases, partly because they participate in many biological reactions. Hemoglobin and vitamin B12, for example, are both complexes—the former of iron and the latter of cobalt (Box 16.1). Complexes of the d-metals are often brightly colored and magnetic and are used in chemistry for analysis, to dissolve ions (Section 11.13), in the... 

---