Chromatography sampling methods

Lab method using glass-fibre/Tenax tube sampling and high performance liquid chromatography Field method using acid hydrolysis, diazotization, coupling and spectrophotometry... 

One-dimensional thin-layer chromatography. This method, based on the work of Wolf and McPherson, will determine more than 0.1% terminal 8-sultones in the neutral oil. This implies that if the AOS contains 1% neutral oil, greater than 30 ppm (active matter basis) of terminal 5-sultones can be determined. Some samples contain a compound having an R( of approximately 0.03 U less than the 5-sultones. This should not be reported as terminal 8-sultones. C14 and C16 terminal 8-sultones have the same retention (R 0.35-0.55, depending on the humidity) and therefore appear as one spot. 

Two-dimensional thin-layer chromatography. This method is used to verify the presence of terminal 5-sultones, terminal unsaturated y-sultone, and terminal 2-chloro-y-sultone, if they are detected in the gas chromatographic determination. After extraction of the neutral oil from the AOS sample, the neutral oil is made up volumetrically to at least a 10% solution in hexane. Of this solution 3 pi is spotted onto a silica gel TLC plate together with standard sultones. It is twice developed with 2-propyl ether and then after turning the plate 90° twice developed with 60/40 n-butyl chloride/methylene chloride. The... 

As mentioned above, two experimental methods were examined as a source of kinetic samples Method A Agitated Glass Ampoule and Method B Static Mixer. These are described in turn in the following paragraphs. Analysis of samples was done using high temperature size exclusion chromatography (SEC) under conditions previously described (9.101. 

Improved high-pressure liquid chromatography (HPLC) methods have been developed for the analysis of quaternary salt type corrosion inhibitors in brine waters [400]. However, these methods are not suitable for imidazolines and amido-amines. A method based on fluorescence detection has been described for the quantitative analysis of the imidazoline- and amido-amine-type corrosion inhibitors in both oil field water and crude oil samples by HPLC [1174]. 

The use of conventional photographic systems for data acquisition, printing and archiving results of planar chromatography [401] has now largely been superseded by video documentation systems. A sample method for documentation of TLC plates has been described by a combination of computer, scanner, and digital colour thermal printer resulting in a very... 

Toluene in air (charcoal diffusive samplers, solvent desorption and gas chromatography). General methods for sampling airborne gases and vapours. 

Protein pharmaceuticals are so complex that multiple methods are required to gain a complete picture of the sample. Methods are often used in combination. For example, a chromatography system may be used to analyze fluorescent reactants from an immunoassay-based method. 

Two methods, EPA SW-846 8015 and 8015A, were, in the past, often quoted as the source of gas chromatography-based methods for measurement of the total petroleum hydrocarbons in a sample. However, the original methods were developed for nonhalogenated volatile organic compounds and were designed to measure a short target list of chemical solvents rather than petroleum hydrocarbons. Thus, because there was no universal method for total petroleum hydrocarbons, there were many variations of these methods. Recently, an updated method... 

Raman often is evaluated as an alternative to an existing high performance liquid chromatography (HPLC) method because of its potential to be noninvasive, fast, simple to perform, and solvent-free. Raman was compared to HPLC for the determination of ticlopidine-hydrochloride (TCL) [43], risperidone [44] in film-coated tablets, and medroxyprogesterone acetate (MPA) in 150-mg/mL suspensions (DepoProvera, Pfizer) [45] it was found to have numerous advantages and performance suitable to replace HPLC. In an off-line laboratory study, the relative standard deviation of the measurement of the composition of powder mixtures of two sulfonamides, sulfathiazole and sulfanilamide, was reduced from 10-20% to less than 4% by employing a reusable, easily prepared rotating sample cell [46]. 

A reliable procedure for determination of molecular parameters number, weight and z-averages of the molecular weight (Mj, i = n, w and z respectively) for polyethylenes, PE, by means of Size Exclusion Chromatography, SEC, has been developed. The Waters Sci. Ltd. GPC/LC Model 150C was used at 135 C with trichlorobenzene, TCB, as a solvent. The standard samples as well as commercial stabilized and not stabilized PE-resins were evaluated. The effects of sampling, method of solution preparation, addition of antioxidant(s), thermal and shear degradation were studied. The adopted procedure allows reproducible determination of and M , with a random error of 4% and M2, with 9%, within 2 to 72 hrs from the initial moment of preparation of solutions. 

The data plotted in Figure 3.6 were obtained by the fractionation of a polydisperse polymer sample. Polydisperse polymers can be fractionated by a number of techniques. The most widely used technique is chromatography. Other methods include addition of a nonsolvent to a polymer solution, cooling a polymer solution, solvent evaporation, extraction, diffusion, and centrifugation. The molecular weight of the fractions may be determined using any of the classic techniques given in Table 3.3. 

Cinnamyl anthranilate can be assayed by a method based on ester hydrolysis. Bulk samples of food-grade cinnamyl anthranilate have been analysed for purity by thin-layer chromatography and high-performance liquid chromatography. A method has been described for determining the content of this compound in food products by steam distillation followed by paper chromatography and examination under ultraviolet light it has a limit of detection of 1 pg (lARC, 1983). 

In handling worldwide industrial hygiene problems for the Air Force, our Laboratory receives a heavy work load of charcoal tube and vapor monitor air samples. With our work load increasing, and more methods being applied to gas chromatography, any method which would remove some of the work load from our overworked gas chromatographs would be welcomed. 

Currently, high-performance liquid chromatography (HPLC) methods have been widely used in the analysis of tocopherols and tocotrienols in food and nutrition areas. Each form of tocopherol and tocotrienol can be separated and quantified individually using HPLC with either a UV or fluorescence detector. The interferences are largely reduced after separation by HPLC. Therefore, the sensitivity and specificity of HPLC methods are much higher than those obtained with the colorimetric, polarimetric, and GC methods. Also, sample preparation in the HPLC methods is simpler and more efficiently duplicated than in the older methods. Many HPLC methods for the quantification of tocopherols and tocotrienols in various foods and biological samples have been reported. Method number 992.03 of the AOAC International Official Methods of Analysis provides an HPLC method to determine vitamin E in milk-based infant formula. It could probably be said that HPLC methods have become dominant in the analysis of tocopherols and tocotrienols. Therefore, the analytical protocols for tocopherols and tocotrienols in this unit are focused on HPLC methods. Normal and reversed-phase HPLC methods are discussed in the separation and quantification of tocopherols and tocotrienols (see Basic Protocol). Sample... 

Due to interference, samples that are high in salt (especially sodium chloride) or samples with a high free amino acid content may be difficult to analyze using this method. In those cases, validated gas chromatography (GC) methods (Mason and Slover, 1971) are more applicable. In addition, samples containing sorbitol should be analyzed by GC or using a calcium-loaded anion-exchange column (see Alternate Protocol 2). 

Development of fast, accurate, and reproducible high-performance liquid chromatography (HPLC) methods has offset the use of traditional open-column and TLC methods in modern chlorophyll separation and analysis. A number of normal and reversed-phase methods have been developed for analysis of chlorophyll derivatives in food samples (unit F4.4), with octadecyl-bonded stationary phase (C]8) techniques predominating in the literature (Schwartz and Lorenzo, 1990). Inclusion of buffer salts such as ammonium acetate in the mobile phase is often useful, as this provides a proton equilibrium suitable for ionizable chlorophyllides and pheophorbides (Almela et al., 2000). 

---