Cellulose-based

This includes organic fibrous materials on a cellulose base such as paper, pressboard, cotton, cotton cloth and natural silk etc., impregnated with lacquers or immersed in an insulating liquid. The impregnation or immersion ensures that the oxygen content of the air does not affect... 

PPVC has also retained a substantial market as a leathercloth, where it is more durable than earlier cellulose-based products. In the 1950s and 1960s it largely replaced leather as a car upholstery material on grounds of cost and durability but was never very popular with consumers. As a result, since the 1970s it has been largely replaced by various fabric materials which have, to this writer at least, proved very durable and preferable in terms of comfort. 

M. Tanaka and H. Yamazaki, Dkect detemination of pantoprazole enantiomers in human serum by reversed-phase liigh peifomance liquid chi omatography using a cellulose-based cliiral stationaiy phase and column-switching system as a sample cleanup procedure , Aim/. Chem. 68 1513-1516(1996). 

The selectivity of another cellulose-based CSP, Chiralcel OJ, has also been examined in SFC [60]. Separations of racemic drugs such as benoxaprofen, temazepam, and mephobarbital were obtained. Acetonitrile proved to be a better modifier than methanol for some of the compounds investigated. The four optical isomers of a calcium channel blocker were resolved by Siret et al. on the Chiralcel OJ CSP [30]. In LC, two CSPs were required to perform the same separation. 

Derivatized amylose is the basis for the Chiralpak AD CSP. This CSP has been utilized for the resolution of ibuprofen and flurbiprofen, as well as other members of the family of nonsteroidal inflammatory drugs (NSAIDs) [39, 61]. Ibuprofen was not resolved on the Chiralpak AD CSP in LC. Pressure-related effects on stereoselectivity were observed by Bargmann-Leyder et al. on a Chiralpak AD CSP [58]. No corresponding effect of pressure on selectivity was observed with a Chiralcel OD CSP. The authors speculated that the helical conformation of the amylose-based CSP is more flexible than that of the cellulose-based CSP. 

Powdered resins systems (80-600 mesh) typically operate at lower pressure drops, generate less waste water, take up less space, and cost much less when compared to deep-bed polishers. However, they operate at only 3 to 4 gpm sq ft (although the filter element area is large) and are designed to be disposable, so that the powdered resin must be replaced whenever the bed is reconditioned. Sometimes inert resins or cellulose-based fibers are used either in place of powdered resins or as a premix, where they function as both filter aids and absorbents. 

Modified cellulose-based thickeners are often used, along with the surfactant-based thickeners already mentioned. 

The cellulose-based waste biomass in this reactor is being digested by special enzymes that break it down into ethanol. These enzymes are being intensively studied to improve the efficiency of conversion. 

As for the solid support, several polymer-supported amines were tested (Fig. 2). For either the pyrazole and isoxazole synthesis, the best results were given by aniline-functionalized cellulose, which has also the advantage of a relatively low cost. For the 2-aminopyrimidine library, polystyrene-based piperazine and piperidine gave products with a much higher purity compared with other secondary non-cyclic or primary amines, hi both cases, the resins could be reused for up to four times before degradation in their behavior was observed. This reusability could be further enhanced (up to 10 cycles for cellulose-based aniline) when the microwave-assisted protocols were used. 

Bis(tri-ra-butyltin) oxide, BusSnOSnBua, is an organotin chemical very effective in, and widely used for, the protection of such cellulosic materials as cotton textiles, wood, and cellulose-based household-... 

Kumar, V., de la Luz Reus-Medina, M. Yang, D. (2002). Preparation, characterization, and tabletting properties of a new cellulose-based pharmaceutical aid. International Journal of Pharmaceutics, Vol. 235,1-2, (March 2002), pp. (129-140), ISSN 0378-5173... 

In principle biomass is a useful fuel for fuel cells many of the technologies discussed above for using biomass as a fuel produce either methane or hydrogen directly and as highlighted below synthesis gas production from biomass for conversion to methanol is an attractive option. Cellulose-based material may be converted to a mixture of hydrogen (70% hydrogen content recovered), CO2 and methane by high-temperature treatment with a nickel catalyst. 

The use of n-butylamino-derivatives of cyclophosphazenes in flame-proofing cellulose-based fabrics has been described in a patent application. The topic of fiame retardants is also covered in a recent review, where phosphazenes are important because of their relatively high phosphorus and nitrogen contents. 

Polysaccharides Cellulose-Based Fluid Loss Additives... 

Pervaporation Membranes Pervaporation has a long history, and many materials have found use in pervaporation experiments. Cellulosic-based materials have given way to polyvinyl alcohol and blends of polyvinyl alcohol and acrylics in commercial water-removing membranes. These membranes are typically solution cast (from... 

Online detection using 4H nuclear magnetic resonance (NMR) is a detection mode that has become increasingly practical. In a recent application, cell culture supernatant was monitored on-line with 1-dimensional NMR for trehalose, P-D-pyranose, P-D-furanose, succinate, acetate and uridine.33 In stopped-flow mode, column fractions can also be analyzed by 2-D NMR. Reaction products of the preparation of the neuromuscular blocking compound atracurium besylate were separated on chiral HPLC and detected by 4H NMR.34 Ten isomeric peaks were separated on a cellulose-based phase and identified by online NMR in stopped-flow mode. 

With either type of dialysis, studies suggest that recovery of renal function is decreased in ARF patients who undergo dialysis compared with those not requiring dialysis. Decreased recovery of renal function may be due to hemodialysis-induced hypotension causing additional ischemic injury to the kidney. Also, exposure of a patient s blood to bioincompatible dialysis membranes (cuprophane or cellulose acetate) results in complement and leukocyte activation which can lead to neutrophil infiltration into the kidney and release of vasoconstrictive substances that can prolong renal dysfunction.26 Synthetic membranes composed of substances such as polysulfone, polyacrylonitrile, and polymethylmethacrylate are considered to be more biocompatible and would be less likely to activate complement. Synthetic membranes are generally more expensive than cellulose-based membranes. Several recent meta-analyses found no difference in mortality between biocompatible and bioincompatible membranes. Whether biocompatible membranes lead to better patient outcomes continues to be debated. 

The TLC process is an off-line process. A number of samples are chromatographed simultaneously, side-by-side. HPTLC is fast (5 min), allows simultaneous separation and can be carried out with the same carrier materials as HPLC. Silica gel and chemically bonded silica gel sorbents are used predominantly in HPTLC other stationary phases are cellulose-based [393]. Separation mechanisms are either NPC (normal-phase chromatography), RPC (reversed-phase chromatography) or IEC (ion-exchange chromatography). RPC on hydrophobic layers is not as widely used in TLC as it is in column chromatography. The resolution capabilities of TLC using silica gel absorbent as compared to C S reversed-phase absorbent have been compared for 18 commercially available plasticisers, and 52 amine and 36 phenolic AOs [394]. 

The application of water-repellent finishes to fabrics actually involves a chemical reaction between the material and the finish. Cellulose-based fibers such as cotton possess hydroxyl (-OH) groups that exist on the surface of fabrics spun and woven from the fiber. The basic structure of cellulose portrayed in Fig. 7.6.1 reveals... 

Dou H, Jiang M, Peng H et al (2003) pH-dependent self-assembly micellization and micelle-hollow-sphere transition of cellulose-based copolymers. Angew Chem Int Ed 42 1516-1519... 

Traditionally, ultrafilters have been manufactured from cellulose acetate or cellulose nitrate. Several other materials, such as polyvinyl chloride and polycarbonate, are now also used in membrane manufacture. Such plastic-type membranes exhibit enhanced chemical and physical stability when compared with cellulose-based ultrafiltration membranes. An important prerequisite in manufacturing ultrafilters is that the material utilized exhibits low protein adsorptive properties. 

An aqueous solution of 0.02 M methyl acetate at 25 C was passed through a column of trioctyl phosphate ( on a cellulose base) which acted as an acid catalytst. The reaction is... 

Biofilm (cellulose-based temporary skin substitute), 5 364 Biofilm reactor, defined, 3 758t Biofilms, 26 128... 

Carbon fibers, 4 735 24 624 26 729-749 applications of, 26 745 cellulose-based, 26 735-736 crystallite dimensions in, 26 737-739 gas-phase grown, 26 736-737 PAN-based, 26 730-733 pitch-based, 26 733-735 plasma-treated, 26 744 processing of, 26 730-737 properties of, 26 739-743 prospects for, 26 746-747 quality control and specifications for, 26 745-746... 

Cellulose acetate valerate, 5 421 Cellulose aminoacetates, 5 419 Cellulose-based carbon fibers, 26 735-736 Cellulose-binding module (CBM), 10 282 Cellulose butyrate... 

This method is very useful for separating amino acids found in food samples. The most effective matrix for separation is an absorbent cellulose-based filter paper. A very effective mobile phase is 70% isopropyl alcohol in water. Although the 20 amino acids are chemically very similar, they may be successfully separated by this method. Amino acids interact with the stationary phase to different extents, thus moving at different speeds. Chemical differences among amino acids that determine migration speed include molecular weight, charge, and polarity. 

From these considerations there evolved the concept of "primary valence chains" in cellulose, held together in bundles, or micelles (crystallites) by secondary forces, as propounded by Meyer and Mark (5). This view was then extended to encompass other high polymers as well. It should be noted however, that Freudenberg had already proposed a chain structure for cellulose, based on degradation experiments (6). If the micelles were to... 

Both in the USA and the EU, the introduction of renewable fuels standards is likely to increase considerably the consumption of bioethanol. Lignocelluloses from agricultural and forest industry residues and/or the carbohydrate fraction of municipal solid waste (MSW) will be the future source of biomass, but starch-rich sources such as corn grain (the major raw material for ethanol in USA) and sugar cane (in Brazil) are currently used. Although land devoted to fuel could reduce land available for food production, this is at present not a serious problem, but could become progressively more important with increasing use of bioethanol. For this reason, it is important to utilize other crops that could be cultivated in unused land (an important social factor to preserve rural populations) and, especially, start to use cellulose-based feedstocks and waste materials as raw material. 

Particular examples for the separation of optical isomers in the (pharmaceutical) industry include prazinquatel [51], 3-blockers [52], chiral epoxide [6],thia-diazin EMD5398 [18] and hetrazipine [7]. The Belgian company UCB Pharma uses a large-scale SMB from NOVASEP to perform optical isomer separation at a scale of several tons per year. Almost all of these separations are performed on cellulose-based stationary phases using organic eluents [4]. 

Based on the high peak capacity of CE, the separation speed, and the availability of numerous chiral selectors and the simplicity of the systems, chiral CE is superior to chiral HPLC separations. This is as well reflected by the high number of publications on chiral CE in recent years. Chiral HPLC is suffering from low peak capacity (broad peaks), system stability (often normal phase systems), pressure sensitivity of columns (often cellulose-based column materials), and as a consequence long separation times. 

Organic polymers and resins have also been used for zeolite binding. An early example is the use polyurethane in the formahon of vibration-resistant zeolite porous bodies for refrigerant drying [90]. Organic binders such as cellulose acetate and other cellulose-based polymers have also used to mitigate problems with binder dissolution in aqueous phase separations [91, 92]. Latex has also been used as a water-stable organic binder [93]. More recently, thermoplastic resins, such as polyethylene have also been used as binders for zeolites [94]. 

Asahi Chemical Industry carried out an exploratory investigation to determine the requirements for cellulose based separators for lithium-ion batteries. In an attempt to obtain an acceptable balance of lithium-ion conductivity, mechanical strength, and resistance to pinhole formation, they fabricated a composite separator (39—85 /cellulosic fibers (diameter 0.5—5.0 /pore diameter 10—200 nm) film. The fibers can reduce the possibility of separator meltdown under exposure to heat generated by overcharging or internal short-circuiting. The resistance of these films was equal to or lower than the conventional polyolefin-based microporous separators. The long-term cycling performance was also very comparable. 

Most economic evaluations of the saccharification process (21,22,23) conclude that at the present time the cost of production of the most favoured products (glucose, single cell protein, ethanol) is higher than production from non-cellulosic sources. Nyiri (24) made an economic evaluation of cellulose-based single cell protein and ethanol production. He suggested that an economical plant output is between 7 and 20 m /year, and, depending on the size and complexity of the plant, estimated capital costs between 6 and 12 million. 

---