Catalysts aromatic carbonyl compounds

Highly enantioselective hydrosilylation of aliphatic and aromatic carbonyl compounds such as acetophenone, methyl phenethyl ketone 1813, or deuterobenz-aldehyde 1815 can be readily achieved with stericaUy hindered silanes such as o-tolyl2SiH2 or phenyl mesityl silane 1810 in the presence of the rhodium-ferrocene catalyst 1811 to give alcohols such as 1812, 1814, and 1816 in high chemical and optical yield [47] (Scheme 12.14). More recently, hydrosilylations of aldehydes... 

The ruthenium-, rhodium-, and palladium-catalyzed C-C bond formations involving C-H activation have been reviewed from the reaction types and mechanistic point of view.135-138 The activation of aromatic carbonyl compounds by transition metal catalyst undergoes ortho-alkylation through the carbometallation of unsaturated partner. This method offers an elegant way to activate C-H bond as a nucleophilic partner. The rhodium catalyst 112 has been used for the alkylation of benzophenone by vinyltrimethylsilane, affording the monoalkylated product 110 in 88% yield (Scheme 34). The formation of the dialkylated product is also observed in some cases. The ruthenium catalyst 113 has shown efficiency for such alkylation reactions, and n-methylacetophenone is transformed to the ortho-disubstituted acetophenone 111 in 97% yield without over-alkylation at the methyl substituent. 

This chelation-assisted C-H/olefin and C-H/acetylene coupling can be applied to a variety of aromatic compounds with a directing group such as ester, aldehyde, imine, azo, oxazolyl, pyridyl, and nitrile [7]. In this section, we describe the coupling reactions of aromatic carbonyl compounds with olefins using a transition metal catalyst. 

The direct selenoacetalization of carbonyl compounds by selenols is by far the shortest and most convenient route to selenoacetals. The reaction is usually carried out at 20 C with zinc chloride (0.5 equiv. versus the carbonyl conqmund) and delivers rapidly (<3 h) and in reasonably good yields methyl and phenyl selenoacetals derived from aliphatic aldehydes and ketones and cyclic ketones (Scheme 69). Selenoacetalization is more difficult to achieve with hindered ketones, such as adamantanone and diisopropyl ketone, and with hindered aromatic carbonyl compounds. In these cases the reaction is best achieved with titanium tetrachloride instead of zinc chloride and is often limited to the methylseleno derivatives (Scheme 78). Tris(methylseleno)borane offers the advantage of not requiring an acid catalyst and is particularly useful for the selenoacetalization of acid labQe aldehydes such as citronellal (Scheme 70, e). 

The Knoevenagel condensation was also performed with MCM-41-(6112)3-NH-(CH2)2-NH2 catalyst prepared through post-modification methodology/ utilizing (2-aminomethylaminopropyl)trimethoxysilane. Various aldehydes and ketones were reacted with malononitrile and ethyl cyanoacetate (Scheme 3.21, R =R = CN and R CN, R = EtOCO) in all the reactions total conversions were achieved in toluene with exclusive formation of dehydrated products (75-100% yield). Interestingly, both aliphatic and aromatic carbonyl compounds showed identical reactivity in the reaction with ethyl cyanoacetate and the substitution on the aromatic ring did not influence the reactivity. 

As described above, appropriately functionalized aromatic substrates such as phenols and aromatic carbonyl compounds undergo intermolecular arylation directly and regioselectively on treatment with aryl halides in the presence of palladium catalysts. As illustrated in Scheme 3, which is a proposed general... 

Ort/io-metallated palladium complexes of azo and hydrazobenzene catalyze the reduction by H2 of nitroaromatics, alkenes, alkynes, and aromatic carbonyl compounds. A palladium-aryl or bond in the precursor complex is a requirement for catalytic activity. The ligands are themselves susceptible to reduction. The kinetics of the reaction under 1 atm H2 have been measured. Palladium(O) complexes catalyze the hydrostannolysis of allyl and allyloxy carbonyl groups. The reaction can be applied to the selective protection-deprotection of aminoacid derivatives see equation (9). Alkenyl cyclopropanes carrying electron-withdrawing substituents are selectively hydrogenolyzed by Pd(0)/PBu3 catalysts... 

CuOTf is an outstandingly effective catalyst for the synthesis of cyclopropyl phosphonates by the reaction of diethyl diazomethylphosphonate with alkenes (eq 6). The resulting cyclopropylphosphonates are useful intermediates for the synthesis of alkylidenecyclopropanes by Wadsworth-Emmons alkena-tion with aromatic carbonyl compounds (eq 7). ... 

To a mixture of an aromatic carbonyl compound (1 2.0 mmol) and an active methylene compound (2 2.0 mmol) in 10 mL of dry toluene (in case of most of the entries) was added 0.05 g of soUd activated catalyst MHT at room temperature. The reactitMi mixture was then stirred for stipulated time (0.5 to 4 h) to complete the reaction. The Knoevenagel product was obtained in excellent yield after usual work-up and proper purification. Physical and spectral properties of all the products were found to be identical when compared with those of authentic samples. After completion of each reaction, the soUd catalyst was filtered off followed by its activation before further use. 

Phenylphosphonic acid (363) has been found to be an efficient, friendly and reusable heterogeneous catalyst for the synthesis of a-aminophos-phonates (362). Under solvent-free conditions, a one-pot, three-component reaction of aliphatic or aromatic amines (360), aliphatic or aromatic carbonyl compounds (361) and diallq l phosphites afforded desired products (362) in a large scale and in moderate to good yields (Scheme 107). °... 

Attempts have been made to develop methods for the production of aromatic isocyanates without the use of phosgene. None of these processes is currently in commercial use. Processes based on the reaction of carbon monoxide with aromatic nitro compounds have been examined extensively (23,27,76). The reductive carbonylation of 2,4-dinitrotoluene [121 -14-2] to toluene 2,4-diaLkylcarbamates is reported to occur in high yield at reaction temperatures of 140—180°C under 6900 kPa (1000 psi) of carbon monoxide. The resultant carbamate product distribution is noted to be a strong function of the alcohol used. Mitsui-Toatsu and Arco have disclosed a two-step reductive carbonylation process based on a cost effective selenium catalyst (22,23). 

These reversible reactions are cataly2ed by bases or acids, such as 2iac chloride and aluminum isopropoxide, or by anion-exchange resias. Ultrasonic vibrations improve the reaction rate and yield. Reaction of aromatic aldehydes or ketones with nitroparaffins yields either the nitro alcohol or the nitro olefin, depending on the catalyst. Conjugated unsaturated aldehydes or ketones and nitroparaffins (Michael addition) yield nitro-substituted carbonyl compounds rather than nitro alcohols. Condensation with keto esters gives the substituted nitro alcohols (37) keto aldehydes react preferentially at the aldehyde function. 

Chiral salen chromium and cobalt complexes have been shown by Jacobsen et al. to catalyze an enantioselective cycloaddition reaction of carbonyl compounds with dienes [22]. The cycloaddition reaction of different aldehydes 1 containing aromatic, aliphatic, and conjugated substituents with Danishefsky s diene 2a catalyzed by the chiral salen-chromium(III) complexes 14a,b proceeds in up to 98% yield and with moderate to high ee (Scheme 4.14). It was found that the presence of oven-dried powdered 4 A molecular sieves led to increased yield and enantioselectivity. The lowest ee (62% ee, catalyst 14b) was obtained for hexanal and the highest (93% ee, catalyst 14a) was obtained for cyclohexyl aldehyde. The mechanism of the cycloaddition reaction was investigated in terms of a traditional cycloaddition, or formation of the cycloaddition product via a Mukaiyama aldol-reaction path. In the presence of the chiral salen-chromium(III) catalyst system NMR spectroscopy of the crude reaction mixture of the reaction of benzaldehyde with Danishefsky s diene revealed the exclusive presence of the cycloaddition-pathway product. The Mukaiyama aldol condensation product was prepared independently and subjected to the conditions of the chiral salen-chromium(III)-catalyzed reactions. No detectable cycloaddition product could be observed. These results point towards a [2-i-4]-cydoaddition mechanism. 

Ruthenium is excellent for hydrogenation of aliphatic carbonyl compounds (92), and it, as well as nickel, is used industrially for conversion of glucose to sorbitol (14,15,29,75,100). Nickel usually requires vigorous conditions unless large amounts of catalyst are used (11,20,27,37,60), or the catalyst is very active, such as W-6 Raney nickel (6). Copper chromite is always used at elevated temperatures and pressures and may be useful if aromatic-ring saturation is to be avoided. Rhodium has given excellent results under mild conditions when other catalysts have failed (4,5,66). It is useful in reduction of aliphatic carbonyls in molecules susceptible to hydrogenolysis. 

Metal-induced reductive dimerization of carbonyl compounds is a useful synthetic method for the formation of vicinally functionalized carbon-carbon bonds. For stoichiometric reductive dimerizations, low-valent metals such as aluminum amalgam, titanium, vanadium, zinc, and samarium have been employed. Alternatively, ternary systems consisting of catalytic amounts of a metal salt or metal complex, a chlorosilane, and a stoichiometric co-reductant provide a catalytic method for the formation of pinacols based on reversible redox couples.2 The homocoupling of aldehydes is effected by vanadium or titanium catalysts in the presence of Me3SiCl and Zn or A1 to give the 1,2-diol derivatives high selectivity for the /-isomer is observed in the case of secondary aliphatic or aromatic aldehydes. 

Si. rra(pentafluorophenyl)boron was found to be an efficient, air-stable, and water-tolerant Lewis-acid catalyst for the allylation reaction of allylsilanes with aldehydes.167 Sc(OTf)3-catalyzed allylations of hydrates of a-keto aldehydes, glyoxylates and activated aromatic aldehydes with allyltrimethylsilane in H2O-CH3CN were examined. a-Keto and a-ester homoallylic alcohols and aromatic homoallylic alcohols were obtained in good to excellent yields.168 Allylation reactions of carbonyl compounds such as aldehydes and reactive ketones using allyltrimethoxysilane in aqueous media proceeded smoothly in the presence of 5 mol% of a CdF2-terpyridine complex (Eq. 8.71).169... 

Examples of the use of heterodienophiles under the action of microwave irradiation are not common. Soufiaoui [84] and Garrigues [37] used carbonyl compounds as die-nophiles. The first example employed solvent-free conditions the second is an example of the use of graphite as a susceptor. Cycloaddition of a carbonyl compound provided a 5,6-dihydro-2H-pyran derivative. These types of reaction proceed poorly with aliphatic and aromatic aldehydes and ketones unless highly reactive dienes and/or Lewis acid catalysts are used. Reaction of 2,3-dimethyl-l,3-butadiene (31) with ethyl glyoxylate (112) occurred in 75% yield in 20 min under the action of microwave irradiation. When conventional heating is used it is necessary to heat the mixture at 150 °C for 4 h in a sealed tube to obtain a satisfactory yield (Scheme 9.33). 

Although there are now several catalysts useful for hydrogenation of saturated carbonyl compounds to alcohols (see Section XII), an alternative approach has involved initial hydrosilylation (Chapter 9 in this volume) followed by acid hydrolysis [Eq. (41)]. The area first developed using principally the RhCl(PPh3)3 catalyst (207-210), and has since proved particularly useful in asymmetric syntheses (see Section III,A,4). Besides simple aliphatic and aromatic aldehydes and ketones, the ter-pene-ketones camphor and menthone were stereoselectively reduced to mainly the less stable alcohols e.g., camphor gave 9 (209). 

Iridium nanopartides also catalyze the hydrogenation of benzyhnethylketone, with high selectivity in reduction of the aromatic ring (92% selectivity in saturated ketone, 8% in saturated alcohol at 97% benzylmethylketone conversion). This preferential coordination of the aromatic ring can be attributed to steric effects that make carbonyl coordination difficult. Therefore, metallic iridium nanoparticles prepared in ILs may serve as active catalysts for the hydrogenation of carbonyl compounds in both solventless and biphasic conditions. 

Finally, polymer 594 has been used as an arene-catalyst to activate nickel from nickel(II) chloride and lithium, in order to perform hydrogenation of different organic substrates such as afkenes, afkynes, carbonyl compounds and their imines, alkyl and aryl halides (chlorides, bromides and iodides), aromatic and heteroaromatic compounds as well as nitrogen-containing systems such as hydrazines, azoxy compounds or Af-amino oxides, giving comparable results to those obtained in the corresponding reaction in solution . 

The synthesis of isoxazolines and pyrazolines via the Michael addition of hydro-xylamine and phenyl hydrazine to chalcones and related enones was also reported with activated Ba(OH)2 as a basic catalyst (293) (Scheme 45). In both cases, reactions were performed at reflux of ethanol, and excellent yields (65-80%) with 100% selectivity to the heterocyclic compounds were observed. Steric hindrance associated with the carbonyl compound as well as the electronic character of the substituents in the aromatic ring slightly affected the yields of the heterocyclic compounds. 

The 1,4-addition reaction of unsaturated carbonyl compounds with Ph3Bi smoothly proceeded in the presence of rhodium catalysts (Scheme 54) [67,68]. Interestingly, the reaction can be conducted in a H20/THF mixture under air. Methyl cinnamate, having an OH group on the aromatic ring, was efficiently phenylated without the protection of the OH group. 

---