Aliphatic Carbonyl Compounds

When diethyl 1-lithio-l-chloromethylphosphonate is treated with carbonyl compounds (aliphatic and aromatic aldehydes or ketones) in THF at low temperature, the intennediate chlorohydrin can eliminate upon warming to room temperature to give diethyl 1,2-epoxyphosphonates in good yields (51-90%) 2 or, in the case of aldehydes, can be treated at low temperature with LDA to give, after acidic work-up, diethyl 2-oxoalkylphosphonates in 65-92% yields (Scheme 3.63). 29. o... 

Smoking is a slow process and it is not easy to control the process. Smoke contains phenolic compounds, adds, and carbonyls and smoke flavor is primarily due to the volatile phenolic compound [10,20,34]. Wood smoke is extranely complex and more than 400 volatiles have been identified [43]. Guillen and Manzanos [26] identified around 140 compounds in liquid smoke prepared from Thymus vulgaris wood. Polycyclic aromatic hydrocarbons are ubiquitous in the environment as pyrolysis products of organic matter. Their concentrations in smoked food can reach levels hazardous for human health, especially when the smoking procedure is carried out under uncontrolled conditions [46]. Wood smoke contains nitrogen oxides, polycyclic aromatic hydrocarbons, phenolic compounds, furans, carbonylic compounds, aliphatic carboxylic acids, tar compounds, carbohydrates. 

SchifT s bases A -Arylimides, Ar-N = CR2, prepared by reaction of aromatic amines with aliphatic or aromatic aldehydes and ketones. They are crystalline, weakly basic compounds which give hydrochlorides in non-aqueous solvents. With dilute aqueous acids the parent amine and carbonyl compounds are regenerated. Reduction with sodium and alcohol gives... 

A-Substituted pyrroles, furans and dialkylthiophenes undergo photosensitized [2 + 2] cycloaddition reactions with carbonyl compounds to give oxetanes. This is illustrated by the addition of furan and benzophenone to give the oxetane (138). The photochemical reaction of pyrroles with aliphatic aldehydes and ketones results in the regiospecific formation of 3-(l-hydroxyalkyl)pyrroles (e.g. 139). The intermediate oxetane undergoes rearrangement under the reaction conditions (79JOC2949). 

Two substituents on two N atoms increase the number of diaziridine structures as compared with oxaziridines, while some limitations as to the nature of substituents on N and C decrease it. Favored starting materials are formaldehyde, aliphatic aldehydes and ketones, together with ammonia and simple aliphatic amines. Aromatic amines do not react. Suitable aminating agents are chloramine, N-chloroalkylamines, hydroxylamine-O-sulfonic acid and their simple alkyl derivatives, but also oxaziridines unsubstituted at nitrogen. Combination of a carbonyl compound, an amine and an aminating agent leads to the standard procedures of diaziridine synthesis. 

Paal-Knorr synthesis, 4, 118, 329 Pariser-Parr-Pople approach, 4, 157 PE spectroscopy, 4, 24, 188-189 photoaddition reactions with aliphatic aldehydes and ketones, 4, 232 photochemical reactions, 4, 67, 201-205 with aliphatic carbonyl compounds, 4, 268 with dimethyl acetylenedicarboxylate, 4, 268 Piloty synthesis, 4, 345 Piloty-Robinson synthesis, 4, 110-111 polymers, 273-274, 295, 301, 302 applications, 4, 376 polymethylation, 4, 224 N-protected, 4, 238 palladation, 4, 83 protonation, 4, 46, 47, 206 pyridazine synthesis from, 3, 52 pyridine complexes NMR, 4, 165... 

Dimethyl sulfoxide reacts with trifluoroacetic anhydride at low tempera ture to give a complex that is an efficient reagent for the oxidation of alcohols to carbonyl compounds [40 41] This reagent can be used to oxidize primary and secondary aliphatic alcohols, cycloalkyl alcohols, and allylic, homoallylic, ben-zylic, acetylenic, and steroidal alcohols (equation 19)... 

Several improved methods for the preparation of known unsaturated azlactones as well as some interesting new compounds of this type have been reported. Crawford and Little observed that the direct use of 2-phenyl-5-oxazolone (1) in the Erlenmeyer reaction gave much improved yields (35-74%) of unsaturated azlactones with aliphatic aldehydes and with ketones such as acetone and cyclohexanone [Eq, (1)], The usual procedure of mixing a carbonyl compound, hippuric acid, acetic anhydride, and sodium (or lead) acetate affords poor yields in the aliphatic series. 

In a recent review of heterocyclic compounds no further mention is made of the three-membered ring structures for the condensation products from hydrazine and carbonyl compounds. However, the products obtained from azodicarbonyl derivatives with aliphatic diazo compounds were formulated as diaziridines [Eq. (1)]. Recent investi-... 

The process can be still more simplified. It is not always necessary to use a pre-formed Schiff s base. Often it is sufficient to bring the carbonyl compound and the amine together in an inert solvent and to add the peracid to the mixture later, - In this way oxaziranes can be obtained in good yield even if the Schiff s base is unknown or can only be obtained in poor yield. For example, formaldehyde gives with aliphatic amines usually only trimers of the Schiff s bases (4). On the other hand, the synthesis of 2-cyclohexyl-oxazirane (5) from cyclohexylamine, formaldehyde, and peracetic acid proceeded in 66%... 

Chiral salen chromium and cobalt complexes have been shown by Jacobsen et al. to catalyze an enantioselective cycloaddition reaction of carbonyl compounds with dienes [22]. The cycloaddition reaction of different aldehydes 1 containing aromatic, aliphatic, and conjugated substituents with Danishefsky s diene 2a catalyzed by the chiral salen-chromium(III) complexes 14a,b proceeds in up to 98% yield and with moderate to high ee (Scheme 4.14). It was found that the presence of oven-dried powdered 4 A molecular sieves led to increased yield and enantioselectivity. The lowest ee (62% ee, catalyst 14b) was obtained for hexanal and the highest (93% ee, catalyst 14a) was obtained for cyclohexyl aldehyde. The mechanism of the cycloaddition reaction was investigated in terms of a traditional cycloaddition, or formation of the cycloaddition product via a Mukaiyama aldol-reaction path. In the presence of the chiral salen-chromium(III) catalyst system NMR spectroscopy of the crude reaction mixture of the reaction of benzaldehyde with Danishefsky s diene revealed the exclusive presence of the cycloaddition-pathway product. The Mukaiyama aldol condensation product was prepared independently and subjected to the conditions of the chiral salen-chromium(III)-catalyzed reactions. No detectable cycloaddition product could be observed. These results point towards a [2-i-4]-cydoaddition mechanism. 

The irradiation is usually carried out with light of the near UV region, in order to activate only ihc n n transition of the carbonyl function," thus generating excited carbonyl species. Depending on the substrate, it can be a singlet or triplet excited state. With aromatic carbonyl compounds, the reactive species are usually in a Ti-state, while with aliphatic carbonyl compounds the reactive species are in a Si-state. An excited carbonyl species reacts with a ground state alkene molecule to form an exciplex, from which in turn diradical species can be formed—e.g. 4 and 5 in the following example ... 

Ruthenium is excellent for hydrogenation of aliphatic carbonyl compounds (92), and it, as well as nickel, is used industrially for conversion of glucose to sorbitol (14,15,29,75,100). Nickel usually requires vigorous conditions unless large amounts of catalyst are used (11,20,27,37,60), or the catalyst is very active, such as W-6 Raney nickel (6). Copper chromite is always used at elevated temperatures and pressures and may be useful if aromatic-ring saturation is to be avoided. Rhodium has given excellent results under mild conditions when other catalysts have failed (4,5,66). It is useful in reduction of aliphatic carbonyls in molecules susceptible to hydrogenolysis. 

The well-known photopolymerization of acrylic monomers usually involves a charge transfer system with carbonyl compound as an acceptor and aliphatic tertiary amine, triethylamine (TEA), as a donor. Instead of tertiary amine such as TEA or DMT, Li et al. [89] investigated the photopolymerization of AN in the presence of benzophenone (BP) and aniline (A) or N-methylaniline (NMA) and found that the BP-A or BP-NMA system will give a higher rate of polymerization than that of the well-known system BP-TEA. Still, we know that secondary aromatic amine would be deprotonated of the H-atom mostly on the N-atom so we proposed the mechanism as follows ... 

Although carbonyl compounds, such as formaldehyde (27,28], can couple with Ce(IV) ion to initiate acrylonitrile (AN) or methyl methacrylate (MMA) polymerization, the remarkable activity of aliphatic aldehyde had not been noticed until the paper of Sun et al. [29] was published. They found that aliphatic aldehydes always... 

A reiterative application of a two-carbon elongation reaction of a chiral carbonyl compound (Homer-Emmonds reaction), reduction (DIBAL) of the obtained trans unsaturated ester, asymmetric epoxidation (SAE or MCPBA) of the resulting allylic alcohol, and then C-2 regioselective addition of a cuprate (Me2CuLi) to the corresponding chiral epoxy alcohol has been utilized for the construction of the polypropionate-derived chain ]R-CH(Me)CH(OH)CH(Me)-R ], present as a partial structure in important natural products such as polyether, ansamycin, or macro-lide antibiotics [52]. A seminal application of this procedure is offered by Kishi s synthesis of the C19-C26 polyketide-type aliphatic segment of rifamycin S, starting from aldehyde 105 (Scheme 8.29) [53]. 

Macrocyclic coordination compounds formed bv condensation of metal amine complexes with aliphatic carbonyl compounds. N. F. Curtis, Coord. Chem. Rev., 1968, 3, 3-47 (78). 

Metal-induced reductive dimerization of carbonyl compounds is a useful synthetic method for the formation of vicinally functionalized carbon-carbon bonds. For stoichiometric reductive dimerizations, low-valent metals such as aluminum amalgam, titanium, vanadium, zinc, and samarium have been employed. Alternatively, ternary systems consisting of catalytic amounts of a metal salt or metal complex, a chlorosilane, and a stoichiometric co-reductant provide a catalytic method for the formation of pinacols based on reversible redox couples.2 The homocoupling of aldehydes is effected by vanadium or titanium catalysts in the presence of Me3SiCl and Zn or A1 to give the 1,2-diol derivatives high selectivity for the /-isomer is observed in the case of secondary aliphatic or aromatic aldehydes. 

Highly enantioselective hydrosilylation of aliphatic and aromatic carbonyl compounds such as acetophenone, methyl phenethyl ketone 1813, or deuterobenz-aldehyde 1815 can be readily achieved with stericaUy hindered silanes such as o-tolyl2SiH2 or phenyl mesityl silane 1810 in the presence of the rhodium-ferrocene catalyst 1811 to give alcohols such as 1812, 1814, and 1816 in high chemical and optical yield [47] (Scheme 12.14). More recently, hydrosilylations of aldehydes... 

Since aromatic substitutions, aliphatic substitutions, additions and conjugate additions to carbonyl compounds, cycloadditions, and ring expansion reactions catalyzed by Fe salts have recently been summarized [17], this section will focus on reactions in which iron salts produce a critical activation on unsaturated functional groups provided by the Lewis-acid character of these salts. 

Besides direct reduction, a one-pot reductive amination of aldehydes and ketones with a-picoline-borane in methanol, in water, and in neat conditions gives the corresponding amine products (Scheme 8.2).40 The synthesis of primary amines can be performed via the reductive amination of the corresponding carbonyl compounds with aqueous ammonia with soluble Rh-catalyst (Eq. 8.17).41 Up to an 86% yield and a 97% selectivity for benzylamines were obtained for the reaction of various benzaldehydes. The use of a bimetallic catalyst based on Rh/Ir is preferable for aliphatic aldehydes. 

The reported structural chemistry of zinc aldehyde complexes is dominated by Vahrenkamp and co-workers. A systematic investigation is reported over three papers published in 1999. All X-ray structures reported in these papers are aryl aldehydes and no aliphatic aldehyde structures with zinc were found in the CSD. Zinc is frequently exploited in preparative organic chemistry and enzyme-catalyzed transformations of organic carbonyl compounds. 

Attack by eCN is slow (rate-limiting), while proton transfer from HCN or a protic solvent, e.g. HzO, is rapid. The effect of the structure of the carbonyl compound on the position of equilibrium in cyanohydrin formation has already been referred to (p. 206) it is a preparative proposition with aldehydes, and with simple aliphatic and cyclic ketones, but is poor for ArCOR, and does not take place at all with ArCOAr. With ArCHO the benzoin reaction (p. 231) may compete with cyanohydrin formation with C=C—C=0, 1,4-addition may compete (cf. p. 200). 

---