Carbon black chemical activity

Ill-defined carbon materials that provide a distinct nanostructure, such as spherical particles in the case of soot and carbon black, or hexagonally ordered cylindrical pores in the case of ordered mesoporous carbons, are not discussed here. Surface chemical, thus catalytic properties of these material are closer to carbon black or activated carbon [13], which is frequently reviewed [2-4]. Here, the higher degree of sp3 hybridization often results in a higher reactivity, however, at lower selectivity, as compared to nanocarbons exposing large basal plane fractions of the overall surface. 

Two other commercial carbonaceous products often confused with carbon black are activated carbon and bone black. Each is produced by processes different from commercial carbon black and possesses unique physical and chemical properties. 

FIG. 4 Electrophoretic mobility vs. pH for a range of amphoteric solids, including alumina [777], a furnace carbon black [56] and chemically modilied carbon blacks and activated carbons [82],... 

Because of demands for improved fuel consumption through reduced rolling resistance, a new series of carbon blacks referred to as LH, ie, N300 with this innovation would be N300 LH. Basically this series of blacks has a wider size range in both the primary particles and primary aggregates in addition to a more chemically active surface area. 

Rubber. The mbber industry consumes finely ground metallic selenium and Selenac (selenium diethyl dithiocarbamate, R. T. Vanderbilt). Both are used with natural mbber and styrene—butadiene mbber (SBR) to increase the rate of vulcanization and improve the aging and mechanical properties of sulfudess and low sulfur stocks. Selenac is also used as an accelerator in butyl mbber and as an activator for other types of accelerators, eg, thiazoles (see Rubber chemicals). Selenium compounds are useflil as antioxidants (qv), uv stabilizers, (qv), bonding agents, carbon black activators, and polymerization additives. Selenac improves the adhesion of polyester fibers to mbber. 

Silica is unique among nonblack fillers. Its reinforcing ability is comparable to that of carbon black, especially when mixed with a suitable coupling agent, and its transparency affords many products. Additionally, it is chemically synthesized, which means that a wide range of silica (in terms of diameter, surface area, or surface activity) may be produced depending on the reaction routes and reaction conditions. 

For the support material of electro-catalysts in PEMFC, Vulcan XC72(Cabot) has been widely used. This carbon black has been successfully employed for the fuel cell applications for its good electric conductivity and high chemical/physical stability. But higher amount of active metals in the electro-catalysts, compared to the general purpose catalysts, make it difficult to control the metal size and the degree of distribution. This is mainly because of the restricted surface area of Vulcan XC72 carbon black. Thus complex and careM processes are necessary to get well dispersed fine active metal particles[4,5]. 

The platinum concentrations in the platinized carbon blacks are reported to be between 10 and 40% (by mass), sometimes even higher. At low concentrations the specific surface area of the platinum on carbon is as high as lOOm /g, whereas unsupported disperse platinum has surface areas not higher than 10 to 15m /g. However, at low platinum concentrations, thicker catalyst layers must be applied, which makes reactant transport to reaction sites more difficult. The degree of dispersion and catalytic activity of the platinum depend not only on its concentration on the carrier but also on the chemical or electrochemical method used to deposit it. 

There are two main varieties of carbon (i) crystalline (e.g., graphite and diamond), and (ii) amorphous. The amorphous variety consists of carbon blacks and charcoals. Carbon blacks are nonporous fine particles of carbon produced by the combustion of gaseous or liquid carbonaceous material (e.g., natural gas, acetylene, oils, resins, tar, etc.) in a limited supply of air. Charcoals are produced by the carbonization of solid carbonaceous material such as coal, wood, nut shells, sugar, synthetic resins, etc. at about 600 °C in the absence of air. The products thus formed have a low porosity, but when activated by air, chlorine, or steam, a highly porous material is produced this porous product is called activated charcoal. Chemically speaking carbon blacks and charcoals are similar, the difference being only in physical aspects. Carbon blacks find use in the rubber industry and in ink manufacture. An important use of charcoals is as adsorbents. 

Carbon blacks are principally made by the chemical decomposition of natural gas or oil. Two classes predominate the furnace blacks (95% of black usage) which are active, and thermal blacks (5% of usage) which are inactive. There are a substantial number of blacks for special applications such as electrically conducting and printing ink blacks. The latter are of too fine a particle size for rubber use. The nomenclature used for carbon blacks includes the ASTM designation and the industry type as illustrated in the next table. 

The enormous importance of carbon in such diverse fields as inorganic and organic chemistry and biology is well known however, only the aspects of carbon relevant to catalysis will be described here. The main topics we are concerned with are porous activated carbons, carbon black as catalyst supports and forms of coking. Carbon is also currently used as storage for natural gas and to clean up radioactive contamination. Carbon is available at low cost and a vast literature exists on its uses. Coal-derived carbon is made from biomass, wood or fossil plants and its microstructure differs from carbon made from industrial coke. Activated carbons are synthesized by thermal activation or by chemical activation to provide desirable properties like high surface area. 

The manufacture of butadiene-based polymers and butadiene derivatives implies potential occupational exposure to a number of other chemical agents, which vary according to product and process, including other monomers (styrene, acrylonitrile, chloroprene), solvents, additives (e.g., activators, antioxidants, modifiers), catalysts, mineral oils, carbon black, chlorine, inorganic acids and caustic solutions (Fajen, 1986a.b Roberts, 1986). Styrene, benzene and toluene were measured in various departments of... 

It appears from the evolution of the adhesion index that a distinction has to be made between the interactions carbon blacks are able to have with unsaturated or with saturated (or near-to-saturated) elastomers. Thus, the adhesion index of butyl rubber is enhanced upon oxidation of the black, while the reverse is observed with polybutadiene 38). The improvement of the reinforcing ability of carbon black upon oxidation, in the former case, has been interpreted by Gessler 401 as due to chemical interactions of butyl rubber with active functional groups on the solid surface. Gessler, relating the reinforcing characteristics of the oxidized carbon black for butyl rubber to the presence of carboxyl groups on the surface of the filler, postulated a cationic... 

DECOLORIZING AGENTS. A substance that removes color by a physical or chemical action. Charcoals, carbon blacks, clays, earths, activated alumina or bauxite, or other materials or highly adsorbent character ate used to remove undesirable colors (and often odors) front sugar, vegetable and animal fats and oils, and other substances. In a broad sense, decolorizing agents also embrace bleaches, which usually remove Color by chemical reaction. 

---